| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise the total progress will just match the one package and be
pretty useless.
|
|
Previously TotalDownload would switch the % download from per package to
overall. Meaning you had a choice of which information to dispplay.
Now with parallel downloads TotalDownload adds an extra progress bar.
There's no reason to have this an off by default feature. Let's just
make it always on.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When the download estimate is over an hour the format displayed changes
from mm:ss to hh:mm:ss. This causes everything to be out of alignment
due to the extra characters.
So instead lets just go back to --:-- when the download => 100 minutes.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Total download callback called right before packages start downloaded.
But we already have an event for such event (ALPM_EVENT_PKG_RETRIEVE_START)
and it is naturally to use the event to pass information about expected
download size.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The progress bar already did this. But the init event and up to date
message printed the full file name. Unify these for consistency.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With the recent 'multibar' interface changes TotalDownload has been disabled.
Now we have a new UI and we need to find another way to display this
information.
When 'TotalDownload' config option is enabled we are going to have an extra
progress bar at the bottom of the screen that shows how much of the entire
download has been completed.
Closes FS#68202
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It requires exposing 'move cursor to the end' function in a pacman
header file. We use it as a chance to make naming of the cursor management
functions more consistent.
Note that there is still possibility of a race condition in the cursor
update logic. 'update cursor index variable' and 'send ASCII control
symbols to console' is not an atomic operation. So if an SIGINT is
received between these two action then cursor position is going to be
screwed.
Fixes FS#67973
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
At the end of download operation our code makes sure the cursor is moved
to the end of the drawing area. But 'printonly' mode has its own if() branch
that skips this cursor alignment. Add cursor_goto_end() to the 'printonly'
codepath to make sure it does not clobber previous output.
Fixes FS#68355
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When building with -DNDEBUG, assert statements are compiled out to
no-ops. Thus, we can't depend on assignments or other computations
occurring inside the assert().
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Create a list of dload_payloads and pass it to the new _alpm_multi_*
interface.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Multiplexed download requires ability to draw UI for multiple active progress
bars. To implement it we use ANSI codes to move cursor up/down and then
redraw the required progress bar.
`pacman_multibar_ui.active_downloads` field represents the list of active
downloads that correspond to progress bars.
`struct pacman_progress_bar` is a data structure for a progress bar.
In some cases (e.g. database downloads) we want to keep progress bars in order.
In some other cases (package downloads) we want to move completed items to the
top of the screen. Function `multibar_move_completed_up` allows to configure
such behavior.
Per discussion in the maillist we do not want to show download progress for
signature files.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With the previous download interface the callback uses the first progress
event as 'download has started' signal. Unfortunately it does not work with
up-to-date files that never receive 'download progress' events.
Up-to-date database messages are currently handled in sync_syncdbs()
after the sequential download is completed and a result from ALPM is
received. But this is not going to work with multiplexed download
interface that returns the result only after all files are completed.
Another problem with 'first progress event is the beginning of the
download' is that such events time are unpredictable. Thus the UI progress
bar order might differ from what has been passed by client to
alpm_dbs_update() function. We actually want to keep the dbs progress bars
in a strict order.
To help to solve the given problems extend the download callback to
allow 2 more events - download started and completed. 'Download started'
events appear in the same order as in the list given by a client.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Multiplexed database/files downloads will use multiple progress bars.
The UI logic is quite complicated and printing error messages while
handling multiple progress bars is going to be challenging.
Instead we are going to save all ALPM error messages to a list and flush
it at the end of the download process. Use on_progress variable that
blocks error messages printing.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
'output' is a list of messages that pacman received but delayed printing
to avoid messing with UI.
Such functionality is useful for the upcoming multi-line progress bar
UI. Let's move it to a separate function.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2018 NEW=2019
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If the key's uid is unknown (for example with db signatures) the
question was:
:: Import PGP key 02FD1C7A934E614545849F19A6234074498E9CEE, "(null)"? [Y/n]
Let's display a modified question for unknown uid.
Signed-off-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Ask the user whether they want to import a missing key before even doing
a search on the keyserver. This will be useful for getting Web Key
Directory support in place: for a WKD, looking up and importing a key
are a single action, so the current key_search -> QUESTION -> key_import
workflow does not apply.
Since only the ID of the package signing key is available before
key_search, we display the packager variable in addition to the key ID
for user convenience.
Signed-off-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 11ab9aa9f5f0f3873df89c73e8715b82f485bd9b replaced a strcpy() call
with memcpy(), without copying the terminating null character.
Since fname is allocated with malloc(), subsequent strstr() calls will
overrun the buffer's boundary.
Signed-off-by: László Várady <laszlo.varady93@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Dummy callbacks are still present to prevent compiler warnings until
libalpm is delta free.
Also remove Delta parsing from pacman.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Rather than use M/s which can be either MB or MiB, specify that it uses
MiB (consistent with the displayed total size).
Fixes FS#59201
Signed-off-by: Sever Oraz <severoraz@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Many of these are pointless (e.g. there is no need to explicitly turn on
spellchecking and language dictionaries for the manpages by default).
The only useful modelines are the ones enforcing the project coding
standards for indentation style (and "maybe" filetype/syntax, but
everything except the asciidoc manpages and makepkg.conf is already
autodetected), and indent style can be applied more easily with
.editorconfig
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2017 NEW=201
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This is primarily to help users who are not aware that -F operations use
a separate set of databases that need to be separately downloaded.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When curl calls alpm's dlcb, alpm calls the frontend's cb with the
following (dlsize, totalsize) arguments:
0, -1: initialize
0, 0: no change since last call
x {x>0, x<y}, y {y>0}: data downloaded, total size known
x {x>0}, x: download finished
If total size is not known, do not call frontend cb (no change to
original behavior); alpm's callback shouldn't be called if there is a
download error.
See agregory's original spec here:
https://wiki.archlinux.org/index.php/User:Apg#download_callback
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When printing a list of URLs of packages to be updated, pacman was ignoring any
replacements that would be made in the update process.
Fixes FS#35812
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This patch fixes an inconsistency in the status messages.
:: Proceed with installation? [Y/n]
:: Retrieving packages ... <--- Space before "...".
blas-3.6.0-4-x86_64
cblas-3.6.0-4-x86_64
lapack-3.6.0-4-x86_64
(3/3) checking keys in keyring
(3/3) checking package integrity
(3/3) loading package files
(3/3) checking for file conflicts
(3/3) checking available disk space
:: Processing package changes... <--- No space before "..."
(1/3) upgrading blas
(2/3) upgrading cblas
(3/3) upgrading lapack
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "Description" field allows a hook to provide a some text for frontends
to use in describing what the hook is doing. For example:
Description = updating info page directory
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Introduces the ALPM_EVENT_HOOK_RUN_{START,DONE} events that are triggered
at the start and end of running an individual hook.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This provides a way to detect when the processing of package changes starts,
allowing pacman to delineate hook output and package installation/removal
output.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add events to let frontends know when hooks are being processed (and when it's
done), as that might be useful to update the UI.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fix new warnings generated by gcc-5 about potential overflows.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In English, this string only has it plural form. However, we need to use the
pluralized translation as some languages can have multiple plural formats.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Leave user files in place and save new config files with a .pacnew
extension. This reduces the complexity of file extraction and respects
the principle that pacman shouldn't modify files it didn't create.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Moving logging to the event callback caused warnings
under clang due to non-literal format strings and
silenced all log messages when --print was used.
This reverts commit cd793c5ab7689cc8cbc18277375b368060e5acfe.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Conflicts:
lib/libalpm/alpm.h
src/pacman/callback.c
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
gettimeofday is susceptible to backwards system time adjustments,
skewing or altogether breaking progress output. For the sake of
platforms that lack clock_gettime support, gettimeofday is retained as
a fallback.
Fixes FS#36983
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Refactoring getcols, yet again. We do the following:
1) Introduce a static global in src/pacman/util.c
2) getcols always prefers this cached value, but will derive it from
the COLUMNS environment var, the characteristics of stdout, or a sane
default (in that order).
3) Introduce a SIGWINCH signal handler to reset the cached value,
meaning we only call ioctl when we don't know the value.
On my machine, pacman -Syy goes from ~4300 ioctl calls to 3.
|
|
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|