Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/acinclude.m4
diff options
context:
space:
mode:
Diffstat (limited to 'acinclude.m4')
-rw-r--r--acinclude.m44872
1 files changed, 0 insertions, 4872 deletions
diff --git a/acinclude.m4 b/acinclude.m4
index 80b0ba0a..740d9ecc 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -1,4876 +1,4 @@
dnl acinclude.m4 - configure macros used by pacman and libalpm
-dnl The majority of this file is the libtool macros we use, kept here so
-dnl we are not dependent on the host-system version of the macros. There
-dnl are some pacman/libalpm specific macros at the end of the file as well.
-
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-## Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007
-## Free Software Foundation, Inc.
-## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-##
-## This file is free software; the Free Software Foundation gives
-## unlimited permission to copy and/or distribute it, with or without
-## modifications, as long as this notice is preserved.
-
-# serial 51 AC_PROG_LIBTOOL
-
-
-# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
-# -----------------------------------------------------------
-# If this macro is not defined by Autoconf, define it here.
-m4_ifdef([AC_PROVIDE_IFELSE],
- [],
- [m4_define([AC_PROVIDE_IFELSE],
- [m4_ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-
-# AC_PROG_LIBTOOL
-# ---------------
-AC_DEFUN([AC_PROG_LIBTOOL],
-[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl
-])])# AC_PROG_LIBTOOL
-
-
-# _AC_PROG_LIBTOOL
-# ----------------
-AC_DEFUN([_AC_PROG_LIBTOOL],
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Prevent multiple expansion
-define([AC_PROG_LIBTOOL], [])
-])# _AC_PROG_LIBTOOL
-
-
-# AC_LIBTOOL_SETUP
-# ----------------
-AC_DEFUN([AC_LIBTOOL_SETUP],
-[AC_PREREQ(2.50)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-AC_LIBTOOL_SYS_MAX_CMD_LEN
-AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-AC_LIBTOOL_OBJDIR
-
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-_LT_AC_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
- # AIX sometimes has problems with the GCC collect2 program. For some
- # reason, if we set the COLLECT_NAMES environment variable, the problems
- # vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
- fi
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed='sed -e 1s/^X//'
-[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g']
-
-# Same as above, but do not quote variable references.
-[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g']
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Constants:
-rm="rm -f"
-
-# Global variables:
-default_ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-ltmain="$ac_aux_dir/ltmain.sh"
-ofile="$default_ofile"
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-AC_CHECK_TOOL(AR, ar, false)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-test -z "$AS" && AS=as
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$DLLTOOL" && DLLTOOL=dlltool
-test -z "$LD" && LD=ld
-test -z "$LN_S" && LN_S="ln -s"
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-test -z "$NM" && NM=nm
-test -z "$SED" && SED=sed
-test -z "$OBJDUMP" && OBJDUMP=objdump
-test -z "$RANLIB" && RANLIB=:
-test -z "$STRIP" && STRIP=:
-test -z "$ac_objext" && ac_objext=o
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
- case $host_os in
- openbsd*)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
- ;;
- *)
- old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
- ;;
- esac
- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-case $deplibs_check_method in
-file_magic*)
- if test "$file_magic_cmd" = '$MAGIC_CMD'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no)
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-enable_win32_dll=yes, enable_win32_dll=no)
-
-AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-AC_ARG_WITH([pic],
- [AC_HELP_STRING([--with-pic],
- [try to use only PIC/non-PIC objects @<:@default=use both@:>@])],
- [pic_mode="$withval"],
- [pic_mode=default])
-test -z "$pic_mode" && pic_mode=default
-
-# Use C for the default configuration in the libtool script
-tagname=
-AC_LIBTOOL_LANG_C_CONFIG
-_LT_AC_TAGCONFIG
-])# AC_LIBTOOL_SETUP
-
-
-# _LT_AC_SYS_COMPILER
-# -------------------
-AC_DEFUN([_LT_AC_SYS_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_AC_SYS_COMPILER
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
-AC_DEFUN([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-AC_DEFUN([_LT_COMPILER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-AC_DEFUN([_LT_LINKER_BOILERPLATE],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$rm conftest*
-])# _LT_LINKER_BOILERPLATE
-
-
-# _LT_AC_SYS_LIBPATH_AIX
-# ----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
- /Import File Strings/,/^$/ {
- /^0/ {
- s/^0 *\(.*\)$/\1/
- p
- }
- }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
- aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_AC_SYS_LIBPATH_AIX
-
-
-# _LT_AC_SHELL_INIT(ARG)
-# ----------------------
-AC_DEFUN([_LT_AC_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
- [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
- [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_AC_SHELL_INIT
-
-
-# _LT_AC_PROG_ECHO_BACKSLASH
-# --------------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH],
-[_LT_AC_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$ECHO in
-X*--fallback-echo)
- # Remove one level of quotation (which was required for Make).
- ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
- ;;
-esac
-
-echo=${ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
- # Discard the --no-reexec flag, and continue.
- shift
-elif test "X[$]1" = X--fallback-echo; then
- # Avoid inline document here, it may be left over
- :
-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
- # Yippee, $echo works!
- :
-else
- # Restart under the correct shell.
- exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
- # used as fallback echo
- shift
- cat <<EOF
-[$]*
-EOF
- exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$ECHO"; then
-if test "X${echo_test_string+set}" != Xset; then
-# find a string as large as possible, as long as the shell can cope with it
- for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
- # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
- if (echo_test_string=`eval $cmd`) 2>/dev/null &&
- echo_test_string=`eval $cmd` &&
- (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
- then
- break
- fi
- done
-fi
-
-if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- :
-else
- # The Solaris, AIX, and Digital Unix default echo programs unquote
- # backslashes. This makes it impossible to quote backslashes using
- # echo "$something" | sed 's/\\/\\\\/g'
- #
- # So, first we look for a working echo in the user's PATH.
-
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for dir in $PATH /usr/ucb; do
- IFS="$lt_save_ifs"
- if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
- test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$dir/echo"
- break
- fi
- done
- IFS="$lt_save_ifs"
-
- if test "X$echo" = Xecho; then
- # We didn't find a better echo, so look for alternatives.
- if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # This shell has a builtin print -r that does the trick.
- echo='print -r'
- elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
- test "X$CONFIG_SHELL" != X/bin/ksh; then
- # If we have ksh, try running configure again with it.
- ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
- export ORIGINAL_CONFIG_SHELL
- CONFIG_SHELL=/bin/ksh
- export CONFIG_SHELL
- exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
- else
- # Try using printf.
- echo='printf %s\n'
- if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
- echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- # Cool, printf works
- :
- elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
- export CONFIG_SHELL
- SHELL="$CONFIG_SHELL"
- export SHELL
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
- test "X$echo_testing_string" = 'X\t' &&
- echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
- test "X$echo_testing_string" = "X$echo_test_string"; then
- echo="$CONFIG_SHELL [$]0 --fallback-echo"
- else
- # maybe with a smaller string...
- prev=:
-
- for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
- if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
- then
- break
- fi
- prev="$cmd"
- done
-
- if test "$prev" != 'sed 50q "[$]0"'; then
- echo_test_string=`eval $prev`
- export echo_test_string
- exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
- else
- # Oops. We lost completely, so just stick with echo.
- echo=echo
- fi
- fi
- fi
- fi
-fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-ECHO=$echo
-if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
- ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(ECHO)
-])])# _LT_AC_PROG_ECHO_BACKSLASH
-
-
-# _LT_AC_LOCK
-# -----------
-AC_DEFUN([_LT_AC_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
- [AC_HELP_STRING([--disable-libtool-lock],
- [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.$ac_objext` in
- *ELF-32*)
- HPUX_IA64_MODE="32"
- ;;
- *ELF-64*)
- HPUX_IA64_MODE="64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -melf32bsmip"
- ;;
- *N32*)
- LD="${LD-ld} -melf32bmipn32"
- ;;
- *64-bit*)
- LD="${LD-ld} -melf64bmip"
- ;;
- esac
- else
- case `/usr/bin/file conftest.$ac_objext` in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- fi
- rm -rf conftest*
- ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|sparc*-*linux*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *32-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_i386_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
- ;;
- ppc64-*linux*|powerpc64-*linux*)
- LD="${LD-ld} -m elf32ppclinux"
- ;;
- s390x-*linux*)
- LD="${LD-ld} -m elf_s390"
- ;;
- sparc64-*linux*)
- LD="${LD-ld} -m elf32_sparc"
- ;;
- esac
- ;;
- *64-bit*)
- case $host in
- x86_64-*kfreebsd*-gnu)
- LD="${LD-ld} -m elf_x86_64_fbsd"
- ;;
- x86_64-*linux*)
- LD="${LD-ld} -m elf_x86_64"
- ;;
- ppc*-*linux*|powerpc*-*linux*)
- LD="${LD-ld} -m elf64ppc"
- ;;
- s390*-*linux*)
- LD="${LD-ld} -m elf64_s390"
- ;;
- sparc*-*linux*)
- LD="${LD-ld} -m elf64_sparc"
- ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_PUSH(C)
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-sparc*-*solaris*)
- # Find out which ABI we are using.
- echo 'int i;' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case `/usr/bin/file conftest.o` in
- *64-bit*)
- case $lt_cv_prog_gnu_ld in
- yes*) LD="${LD-ld} -m elf64_sparc" ;;
- *) LD="${LD-ld} -64" ;;
- esac
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw* | *-*-pw32*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
- ;;
- ])
-esac
-
-need_locks="$enable_libtool_lock"
-
-])# _LT_AC_LOCK
-
-
-# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- # The option is referenced via a variable to avoid confusing sed.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>conftest.err)
- ac_status=$?
- cat conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s "$ac_outfile"; then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings other than the usual output.
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- fi
- $rm conftest*
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$5], , :, [$5])
-else
- ifelse([$6], , :, [$6])
-fi
-])# AC_LIBTOOL_COMPILER_OPTION
-
-
-# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-# [ACTION-SUCCESS], [ACTION-FAILURE])
-# ------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([AC_LIBTOOL_LINKER_OPTION],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
- [$2=no
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS $3"
- echo "$lt_simple_link_test_code" > conftest.$ac_ext
- if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
- # The linker can only warn and ignore the option if not recognized
- # So say no if there are warnings
- if test -s conftest.err; then
- # Append any errors to the config.log.
- cat conftest.err 1>&AS_MESSAGE_LOG_FD
- $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
- $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
- if diff conftest.exp conftest.er2 >/dev/null; then
- $2=yes
- fi
- else
- $2=yes
- fi
- fi
- $rm conftest*
- LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
- ifelse([$4], , :, [$4])
-else
- ifelse([$5], , :, [$5])
-fi
-])# AC_LIBTOOL_LINKER_OPTION
-
-
-# AC_LIBTOOL_SYS_MAX_CMD_LEN
-# --------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN],
-[# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
- i=0
- teststring="ABCD"
-
- case $build_os in
- msdosdjgpp*)
- # On DJGPP, this test can blow up pretty badly due to problems in libc
- # (any single argument exceeding 2000 bytes causes a buffer overrun
- # during glob expansion). Even if it were fixed, the result of this
- # check would be larger than it should be.
- lt_cv_sys_max_cmd_len=12288; # 12K is about right
- ;;
-
- gnu*)
- # Under GNU Hurd, this test is not required because there is
- # no limit to the length of command line arguments.
- # Libtool will interpret -1 as no limit whatsoever
- lt_cv_sys_max_cmd_len=-1;
- ;;
-
- cygwin* | mingw*)
- # On Win9x/ME, this test blows up -- it succeeds, but takes
- # about 5 minutes as the teststring grows exponentially.
- # Worse, since 9x/ME are not pre-emptively multitasking,
- # you end up with a "frozen" computer, even though with patience
- # the test eventually succeeds (with a max line length of 256k).
- # Instead, let's just punt: use the minimum linelength reported by
- # all of the supported platforms: 8192 (on NT/2K/XP).
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- amigaos*)
- # On AmigaOS with pdksh, this test takes hours, literally.
- # So we just punt and use a minimum line length of 8192.
- lt_cv_sys_max_cmd_len=8192;
- ;;
-
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
- # This has been around since 386BSD, at least. Likely further.
- if test -x /sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
- elif test -x /usr/sbin/sysctl; then
- lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
- else
- lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs
- fi
- # And add a safety zone
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- ;;
-
- interix*)
- # We know the value 262144 and hardcode it with a safety zone (like BSD)
- lt_cv_sys_max_cmd_len=196608
- ;;
-
- osf*)
- # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
- # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
- # nice to cause kernel panics so lets avoid the loop below.
- # First set a reasonable default.
- lt_cv_sys_max_cmd_len=16384
- #
- if test -x /sbin/sysconfig; then
- case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
- *1*) lt_cv_sys_max_cmd_len=-1 ;;
- esac
- fi
- ;;
- sco3.2v5*)
- lt_cv_sys_max_cmd_len=102400
- ;;
- sysv5* | sco5v6* | sysv4.2uw2*)
- kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
- if test -n "$kargmax"; then
- lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'`
- else
- lt_cv_sys_max_cmd_len=32768
- fi
- ;;
- *)
- lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
- else
- SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
- while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \
- = "XX$teststring") >/dev/null 2>&1 &&
- new_result=`expr "X$teststring" : ".*" 2>&1` &&
- lt_cv_sys_max_cmd_len=$new_result &&
- test $i != 17 # 1/2 MB should be enough
- do
- i=`expr $i + 1`
- teststring=$teststring$teststring
- done
- teststring=
- # Add a significant safety factor because C++ compilers can tack on massive
- # amounts of additional arguments before passing them to the linker.
- # It appears as though 1/2 is a usable value.
- lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
- fi
- ;;
- esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
- AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
- AC_MSG_RESULT(none)
-fi
-])# AC_LIBTOOL_SYS_MAX_CMD_LEN
-
-
-# _LT_AC_CHECK_DLFCN
-# ------------------
-AC_DEFUN([_LT_AC_CHECK_DLFCN],
-[AC_CHECK_HEADERS(dlfcn.h)dnl
-])# _LT_AC_CHECK_DLFCN
-
-
-# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ---------------------------------------------------------------------
-AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
- [$4]
-else
- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
- lt_status=$lt_dlunknown
- cat > conftest.$ac_ext <<EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LT_DLGLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LT_DLGLOBAL DL_GLOBAL
-# else
-# define LT_DLGLOBAL 0
-# endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LT_DLLAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LT_DLLAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LT_DLLAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LT_DLLAZY_OR_NOW DL_NOW
-# else
-# define LT_DLLAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-#ifdef __cplusplus
-extern "C" void exit (int);
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
- int status = $lt_dlunknown;
-
- if (self)
- {
- if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
- /* dlclose (self); */
- }
- else
- puts (dlerror ());
-
- exit (status);
-}]
-EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
- (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
- lt_status=$?
- case x$lt_status in
- x$lt_dlno_uscore) $1 ;;
- x$lt_dlneed_uscore) $2 ;;
- x$lt_dlunknown|x*) $3 ;;
- esac
- else :
- # compilation failed
- $3
- fi
-fi
-rm -fr conftest*
-])# _LT_AC_TRY_DLOPEN_SELF
-
-
-# AC_LIBTOOL_DLOPEN_SELF
-# ----------------------
-AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF],
-[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
- enable_dlopen=unknown
- enable_dlopen_self=unknown
- enable_dlopen_self_static=unknown
-else
- lt_cv_dlopen=no
- lt_cv_dlopen_libs=
-
- case $host_os in
- beos*)
- lt_cv_dlopen="load_add_on"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ;;
-
- mingw* | pw32*)
- lt_cv_dlopen="LoadLibrary"
- lt_cv_dlopen_libs=
- ;;
-
- cygwin*)
- lt_cv_dlopen="dlopen"
- lt_cv_dlopen_libs=
- ;;
-
- darwin*)
- # if libdl is installed we need to link against it
- AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
- lt_cv_dlopen_libs=
- lt_cv_dlopen_self=yes
- ])
- ;;
-
- *)
- AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
- [AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"],
- [AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
- [AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
- [AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
- [AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"])
- ])
- ])
- ])
- ])
- ])
- ;;
- esac
-
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
- enable_dlopen=no
- fi
-
- case $lt_cv_dlopen in
- dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
- save_LDFLAGS="$LDFLAGS"
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
- save_LIBS="$LIBS"
- LIBS="$lt_cv_dlopen_libs $LIBS"
-
- AC_CACHE_CHECK([whether a program can dlopen itself],
- lt_cv_dlopen_self, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
- lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
- ])
-
- if test "x$lt_cv_dlopen_self" = xyes; then
- wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
- AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
- lt_cv_dlopen_self_static, [dnl
- _LT_AC_TRY_DLOPEN_SELF(
- lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
- lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross)
- ])
- fi
-
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
- ;;
- esac
-
- case $lt_cv_dlopen_self in
- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
- *) enable_dlopen_self=unknown ;;
- esac
-
- case $lt_cv_dlopen_self_static in
- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
- *) enable_dlopen_self_static=unknown ;;
- esac
-fi
-])# AC_LIBTOOL_DLOPEN_SELF
-
-
-# AC_LIBTOOL_PROG_CC_C_O([TAGNAME])
-# ---------------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler
-AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
- [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
- $rm -r conftest 2>/dev/null
- mkdir conftest
- cd conftest
- mkdir out
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- lt_compiler_flag="-o out/conftest2.$ac_objext"
- # Insert the option either (1) after the last *FLAGS variable, or
- # (2) before a word containing "conftest.", or (3) at the end.
- # Note that $ac_compile itself does not contain backslashes and begins
- # with a dollar sign (not a hyphen), so the echo should work correctly.
- lt_compile=`echo "$ac_compile" | $SED \
- -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
- -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
- -e 's:$: $lt_compiler_flag:'`
- (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
- (eval "$lt_compile" 2>out/conftest.err)
- ac_status=$?
- cat out/conftest.err >&AS_MESSAGE_LOG_FD
- echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
- if (exit $ac_status) && test -s out/conftest2.$ac_objext
- then
- # The compiler can only warn and ignore the option if not recognized
- # So say no if there are warnings
- $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
- $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
- if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
- fi
- fi
- chmod u+w . 2>&AS_MESSAGE_LOG_FD
- $rm conftest*
- # SGI C++ compiler will create directory out/ii_files/ for
- # template instantiation
- test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files
- $rm out/* && rmdir out
- cd ..
- rmdir conftest
- $rm conftest*
-])
-])# AC_LIBTOOL_PROG_CC_C_O
-
-
-# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME])
-# -----------------------------------------
-# Check to see if we can do hard links to lock some files if needed
-AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS],
-[AC_REQUIRE([_LT_AC_LOCK])dnl
-
-hard_links="nottested"
-if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
- # do not overwrite the value of need_locks provided by the user
- AC_MSG_CHECKING([if we can lock with hard links])
- hard_links=yes
- $rm conftest*
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- touch conftest.a
- ln conftest.a conftest.b 2>&5 || hard_links=no
- ln conftest.a conftest.b 2>/dev/null && hard_links=no
- AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
- need_locks=warn
- fi
-else
- need_locks=no
-fi
-])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS
-
-
-# AC_LIBTOOL_OBJDIR
-# -----------------
-AC_DEFUN([AC_LIBTOOL_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
- lt_cv_objdir=.libs
-else
- # MS-DOS does not allow filenames that begin with a dot.
- lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-])# AC_LIBTOOL_OBJDIR
-
-
-# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME])
-# ----------------------------------------------
-# Check hardcoding attributes.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_AC_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \
- test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \
- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
- # We can hardcode non-existant directories.
- if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no &&
- # If the only mechanism to avoid hardcoding is shlibpath_var, we
- # have to relink, otherwise we might link with an installed library
- # when we should be linking with a yet-to-be-installed one
- ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then
- # Linking always hardcodes the temporary library directory.
- _LT_AC_TAGVAR(hardcode_action, $1)=relink
- else
- # We can link without hardcoding, and we can hardcode nonexisting dirs.
- _LT_AC_TAGVAR(hardcode_action, $1)=immediate
- fi
-else
- # We cannot hardcode anything, or else we can only hardcode existing
- # directories.
- _LT_AC_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then
- # Fast installation is not supported
- enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
- # Fast installation is not necessary
- enable_fast_install=needless
-fi
-])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH
-
-
-# AC_LIBTOOL_SYS_LIB_STRIP
-# ------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP],
-[striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
- test -z "$striplib" && striplib="$STRIP --strip-unneeded"
- AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
- case $host_os in
- darwin*)
- if test -n "$STRIP" ; then
- striplib="$STRIP -x"
- old_striplib="$STRIP -S"
- AC_MSG_RESULT([yes])
- else
- AC_MSG_RESULT([no])
-fi
- ;;
- *)
- AC_MSG_RESULT([no])
- ;;
- esac
-fi
-])# AC_LIBTOOL_SYS_LIB_STRIP
-
-
-# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-m4_if($1,[],[
-if test "$GCC" = yes; then
- case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
- esac
- lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then
- # if the path contains ";" then we assume it to be the separator
- # otherwise default to the standard path separator (i.e. ":") - it is
- # assumed that no part of a normal pathname contains ";" but that should
- # okay in the real world where ";" in dirpaths is itself problematic.
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'`
- else
- lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- # Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
- lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
- for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
- test -d "$lt_sys_path" && \
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
- fi
- done
- lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
- for (lt_i = NF; lt_i > 0; lt_i--) {
- if ($lt_i != "" && $lt_i != ".") {
- if ($lt_i == "..") {
- lt_count++;
- } else {
- if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
- } else {
- lt_count--;
- }
- }
- }
- }
- if (lt_foo != "") { lt_freq[[lt_foo]]++; }
- if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
- sys_lib_search_path_spec=`echo $lt_search_path_spec`
-else
- sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
- shlibpath_var=LIBPATH
-
- # AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
-
-aix4* | aix5*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
- # AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- else
- # With GCC up to 2.95.x, collect2 would create an import file
- # for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
- # development snapshots of GCC prior to 3.0.
- case $host_os in
- aix4 | aix4.[[01]] | aix4.[[01]].*)
- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
- echo ' yes '
- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
- :
- else
- can_build_shared=no
- fi
- ;;
- esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
- # soname into executable. Probably we can add versioning support to
- # collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
- # If using run time linking (on AIX 4.2 or later) use lib<name>.so
- # instead of lib<name>.a to let people know that these are not
- # typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
- # We preserve .a as extension for shared libraries through AIX4.2
- # and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
- shlibpath_var=LIBPATH
- fi
- ;;
-
-amigaos*)
- library_names_spec='$libname.ixlibrary $libname.a'
- # Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
- ;;
-
-beos*)
- library_names_spec='${libname}${shared_ext}'
- dynamic_linker="$host_os ld.so"
- shlibpath_var=LIBRARY_PATH
- ;;
-
-bsdi[[45]]*)
- version_type=linux
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
- sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
- # the default ld.so.conf also contains /usr/contrib/lib and
- # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
- # libtool to hard-code these into programs
- ;;
-
-cygwin* | mingw* | pw32*)
- version_type=windows
- shrext_cmds=".dll"
- need_version=no
- need_lib_prefix=no
-
- case $GCC,$host_os in
- yes,cygwin* | yes,mingw* | yes,pw32*)
- library_names_spec='$libname.dll.a'
- # DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
- dldir=$destdir/`dirname \$dlpath`~
- test -d \$dldir || mkdir -p \$dldir~
- $install_prog $dir/$dlname \$dldir/$dlname~
- chmod a+x \$dldir/$dlname'
- postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
- dlpath=$dir/\$dldll~
- $rm \$dlpath'
- shlibpath_overrides_runpath=yes
-
- case $host_os in
- cygwin*)
- # Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
- ;;
- mingw*)
- # MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
- if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then
- # It is most probably a Windows format PATH printed by
- # mingw gcc, but we are running on Cygwin. Gcc prints its search
- # path with ; separators, and with drive letters. We can handle the
- # drive letters (cygwin fileutils understands them), so leave them,
- # especially as we might pass files found there to a mingw objdump,
- # which wouldn't understand a cygwinified path. Ahh.
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
- else
- sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
- fi
- ;;
- pw32*)
- # pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- ;;
- esac
- ;;
-
- *)
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
- ;;
- esac
- dynamic_linker='Win32 ld.exe'
- # FIXME: first we should search . and the directory the executable is in
- shlibpath_var=PATH
- ;;
-
-darwin* | rhapsody*)
- dynamic_linker="$host_os dyld"
- version_type=darwin
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
- shlibpath_overrides_runpath=yes
- shlibpath_var=DYLD_LIBRARY_PATH
- shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
- m4_if([$1], [],[
- sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
- sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
- ;;
-
-dgux*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-freebsd1*)
- dynamic_linker=no
- ;;
-
-freebsd* | dragonfly*)
- # DragonFly does not have aout. When/if they implement a new
- # versioning mechanism, adjust this.
- if test -x /usr/bin/objformat; then
- objformat=`/usr/bin/objformat`
- else
- case $host_os in
- freebsd[[123]]*) objformat=aout ;;
- *) objformat=elf ;;
- esac
- fi
- version_type=freebsd-$objformat
- case $version_type in
- freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- need_version=no
- need_lib_prefix=no
- ;;
- freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
- need_version=yes
- ;;
- esac
- shlibpath_var=LD_LIBRARY_PATH
- case $host_os in
- freebsd2*)
- shlibpath_overrides_runpath=yes
- ;;
- freebsd3.[[01]]* | freebsdelf3.[[01]]*)
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
- freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
- *) # from 4.6 on, and DragonFly
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
- esac
- ;;
-
-gnu*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- ;;
-
-hpux9* | hpux10* | hpux11*)
- # Give a soname corresponding to the major version so that dld.sl refuses to
- # link against other versions.
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- case $host_cpu in
- ia64*)
- shrext_cmds='.so'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.so"
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
- sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
- else
- sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
- fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- hppa*64*)
- shrext_cmds='.sl'
- hardcode_into_libs=yes
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
- shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
- ;;
- *)
- shrext_cmds='.sl'
- dynamic_linker="$host_os dld.sl"
- shlibpath_var=SHLIB_PATH
- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- ;;
- esac
- # HP-UX runs *really* slowly unless shared libraries are mode 555.
- postinstall_cmds='chmod 555 $lib'
- ;;
-
-interix[[3-9]]*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $host_os in
- nonstopux*) version_type=nonstopux ;;
- *)
- if test "$lt_cv_prog_gnu_ld" = yes; then
- version_type=linux
- else
- version_type=irix
- fi ;;
- esac
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
- case $host_os in
- irix5* | nonstopux*)
- libsuff= shlibsuff=
- ;;
- *)
- case $LD in # libtool.m4 will add one of these switches to LD
- *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
- libsuff= shlibsuff= libmagic=32-bit;;
- *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
- libsuff=32 shlibsuff=N32 libmagic=N32;;
- *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
- libsuff=64 shlibsuff=64 libmagic=64-bit;;
- *) libsuff= shlibsuff= libmagic=never-match;;
- esac
- ;;
- esac
- shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
- hardcode_into_libs=yes
- ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
- dynamic_linker=no
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- # This implies no fast_install, which is unacceptable.
- # Some rework will be needed to allow for fast_install
- # before this can be enabled.
- hardcode_into_libs=yes
-
- # Append ld.so.conf contents to the search path
- if test -f /etc/ld.so.conf; then
- lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
- sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
- fi
-
- # We used to test for /lib/ld.so.1 and disable shared libraries on
- # powerpc, because MkLinux only supported shared libraries with the
- # GNU dynamic linker. Since this was broken with cross compilers,
- # most powerpc-linux boxes support dynamic linking these days and
- # people can always --disable-shared, the test was removed, and we
- # assume the GNU/Linux dynamic linker is in use.
- dynamic_linker='GNU/Linux ld.so'
- ;;
-
-netbsd*)
- version_type=sunos
- need_lib_prefix=no
- need_version=no
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- dynamic_linker='NetBSD (a.out) ld.so'
- else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- dynamic_linker='NetBSD ld.elf_so'
- fi
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- ;;
-
-newsos6)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-nto-qnx*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- ;;
-
-openbsd*)
- version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
- need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
- ;;
-
-os2*)
- libname_spec='$name'
- shrext_cmds=".dll"
- need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
- dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
- ;;
-
-osf3* | osf4* | osf5*)
- version_type=osf
- need_lib_prefix=no
- need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- shlibpath_var=LD_LIBRARY_PATH
- sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
- ;;
-
-rdos*)
- dynamic_linker=no
- ;;
-
-solaris*)
- version_type=linux
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- hardcode_into_libs=yes
- # ldd complains unless libraries are executable
- postinstall_cmds='chmod +x $lib'
- ;;
-
-sunos4*)
- version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
- finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
- need_lib_prefix=no
- fi
- need_version=yes
- ;;
-
-sysv4 | sysv4.3*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- case $host_vendor in
- sni)
- shlibpath_overrides_runpath=no
- need_lib_prefix=no
- export_dynamic_flag_spec='${wl}-Blargedynsym'
- runpath_var=LD_RUN_PATH
- ;;
- siemens)
- need_lib_prefix=no
- ;;
- motorola)
- need_lib_prefix=no
- need_version=no
- shlibpath_overrides_runpath=no
- sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
- ;;
- esac
- ;;
-
-sysv4*MP*)
- if test -d /usr/nec ;then
- version_type=linux
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
- shlibpath_var=LD_LIBRARY_PATH
- fi
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
- sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
- shlibpath_overrides_runpath=no
- else
- sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
- shlibpath_overrides_runpath=yes
- case $host_os in
- sco3.2v5*)
- sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
- ;;
- esac
- fi
- sys_lib_dlsearch_path_spec='/usr/lib'
- ;;
-
-uts4*)
- version_type=linux
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- ;;
-
-*)
- dynamic_linker=no
- ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-])# AC_LIBTOOL_SYS_DYNAMIC_LINKER
-
-
-# _LT_AC_TAGCONFIG
-# ----------------
-AC_DEFUN([_LT_AC_TAGCONFIG],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_ARG_WITH([tags],
- [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@],
- [include additional configurations @<:@automatic@:>@])],
- [tagnames="$withval"])
-
-if test -f "$ltmain" && test -n "$tagnames"; then
- if test ! -f "${ofile}"; then
- AC_MSG_WARN([output file `$ofile' does not exist])
- fi
-
- if test -z "$LTCC"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
- if test -z "$LTCC"; then
- AC_MSG_WARN([output file `$ofile' does not look like a libtool script])
- else
- AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile'])
- fi
- fi
- if test -z "$LTCFLAGS"; then
- eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`"
- fi
-
- # Extract list of available tagged configurations in $ofile.
- # Note that this assumes the entire list is on one line.
- available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
-
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for tagname in $tagnames; do
- IFS="$lt_save_ifs"
- # Check whether tagname contains only valid characters
- case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in
- "") ;;
- *) AC_MSG_ERROR([invalid tag name: $tagname])
- ;;
- esac
-
- if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
- then
- AC_MSG_ERROR([tag name \"$tagname\" already exists])
- fi
-
- # Update the list of available tags.
- if test -n "$tagname"; then
- echo appending configuration tag \"$tagname\" to $ofile
-
- case $tagname in
- RC)
- AC_LIBTOOL_LANG_RC_CONFIG
- ;;
-
- *)
- AC_MSG_ERROR([Unsupported tag name: $tagname])
- ;;
- esac
-
- # Append the new tag name to the list of available tags.
- if test -n "$tagname" ; then
- available_tags="$available_tags $tagname"
- fi
- fi
- done
- IFS="$lt_save_ifs"
-
- # Now substitute the updated list of available tags.
- if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
- mv "${ofile}T" "$ofile"
- chmod +x "$ofile"
- else
- rm -f "${ofile}T"
- AC_MSG_ERROR([unable to update list of available tagged configurations.])
- fi
-fi
-])# _LT_AC_TAGCONFIG
-
-
-# AC_LIBTOOL_DLOPEN
-# -----------------
-# enable checks for dlopen support
-AC_DEFUN([AC_LIBTOOL_DLOPEN],
- [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_DLOPEN
-
-
-# AC_LIBTOOL_WIN32_DLL
-# --------------------
-# declare package support for building win32 DLLs
-AC_DEFUN([AC_LIBTOOL_WIN32_DLL],
-[AC_BEFORE([$0], [AC_LIBTOOL_SETUP])
-])# AC_LIBTOOL_WIN32_DLL
-
-
-# AC_ENABLE_SHARED([DEFAULT])
-# ---------------------------
-# implement the --enable-shared flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_SHARED],
-[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([shared],
- [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@],
- [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_shared=yes ;;
- no) enable_shared=no ;;
- *)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_shared=]AC_ENABLE_SHARED_DEFAULT)
-])# AC_ENABLE_SHARED
-
-
-# AC_DISABLE_SHARED
-# -----------------
-# set the default shared flag to --disable-shared
-AC_DEFUN([AC_DISABLE_SHARED],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)
-])# AC_DISABLE_SHARED
-
-
-# AC_ENABLE_STATIC([DEFAULT])
-# ---------------------------
-# implement the --enable-static flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_STATIC],
-[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([static],
- [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@],
- [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_static=yes ;;
- no) enable_static=no ;;
- *)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_static=]AC_ENABLE_STATIC_DEFAULT)
-])# AC_ENABLE_STATIC
-
-
-# AC_DISABLE_STATIC
-# -----------------
-# set the default static flag to --disable-static
-AC_DEFUN([AC_DISABLE_STATIC],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)
-])# AC_DISABLE_STATIC
-
-
-# AC_ENABLE_FAST_INSTALL([DEFAULT])
-# ---------------------------------
-# implement the --enable-fast-install flag
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
-AC_DEFUN([AC_ENABLE_FAST_INSTALL],
-[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE([fast-install],
- [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@],
- [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])],
- [p=${PACKAGE-default}
- case $enableval in
- yes) enable_fast_install=yes ;;
- no) enable_fast_install=no ;;
- *)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
- for pkg in $enableval; do
- IFS="$lt_save_ifs"
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$lt_save_ifs"
- ;;
- esac],
- [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT)
-])# AC_ENABLE_FAST_INSTALL
-
-
-# AC_DISABLE_FAST_INSTALL
-# -----------------------
-# set the default to --disable-fast-install
-AC_DEFUN([AC_DISABLE_FAST_INSTALL],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)
-])# AC_DISABLE_FAST_INSTALL
-
-
-# AC_LIBTOOL_PICMODE([MODE])
-# --------------------------
-# implement the --with-pic flag
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
-AC_DEFUN([AC_LIBTOOL_PICMODE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)
-])# AC_LIBTOOL_PICMODE
-
-
-# AC_PROG_EGREP
-# -------------
-# This is predefined starting with Autoconf 2.54, so this conditional
-# definition can be removed once we require Autoconf 2.54 or later.
-m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP],
-[AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep],
- [if echo a | (grep -E '(a|b)') >/dev/null 2>&1
- then ac_cv_prog_egrep='grep -E'
- else ac_cv_prog_egrep='egrep'
- fi])
- EGREP=$ac_cv_prog_egrep
- AC_SUBST([EGREP])
-])])
-
-
-# AC_PATH_TOOL_PREFIX
-# -------------------
-# find a file program which can recognize shared library
-AC_DEFUN([AC_PATH_TOOL_PREFIX],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
- ;;
-*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case $deplibs_check_method in
- "file_magic "*)
- file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- $EGREP "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
- ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
- AC_MSG_RESULT($MAGIC_CMD)
-else
- AC_MSG_RESULT(no)
-fi
-])# AC_PATH_TOOL_PREFIX
-
-
-# AC_PATH_MAGIC
-# -------------
-# find a file program which can recognize a shared library
-AC_DEFUN([AC_PATH_MAGIC],
-[AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
- else
- MAGIC_CMD=:
- fi
-fi
-])# AC_PATH_MAGIC
-
-
-# AC_PROG_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([AC_PROG_LD],
-[AC_ARG_WITH([gnu-ld],
- [AC_HELP_STRING([--with-gnu-ld],
- [assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
- [with_gnu_ld=no])
-AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$GCC" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by $CC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case $ac_prog in
- # Accept absolute paths.
- [[\\/]]* | ?:[[\\/]]*)
- re_direlt='/[[^/]][[^/]]*/\.\./'
- # Canonicalize the pathname of ld
- ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some variants of GNU ld only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
- *GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
- ;;
- *)
- test "$with_gnu_ld" != yes && break
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
-else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])# AC_PROG_LD
-
-
-# AC_PROG_LD_GNU
-# --------------
-AC_DEFUN([AC_PROG_LD_GNU],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
- lt_cv_prog_gnu_ld=yes
- ;;
-*)
- lt_cv_prog_gnu_ld=no
- ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# AC_PROG_LD_GNU
-
-
-# AC_PROG_LD_RELOAD_FLAG
-# ----------------------
-# find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN([AC_PROG_LD_RELOAD_FLAG],
-[AC_CACHE_CHECK([for $LD option to reload object files],
- lt_cv_ld_reload_flag,
- [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
- darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
- else
- reload_cmds='$LD$reload_flag -o $output$reload_objs'
- fi
- ;;
-esac
-])# AC_PROG_LD_RELOAD_FLAG
-
-
-# AC_DEPLIBS_CHECK_METHOD
-# -----------------------
-# how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN([AC_DEPLIBS_CHECK_METHOD],
-[AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix4* | aix5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi[[45]]*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin*)
- # func_win32_libid is a shell function defined in ltmain.sh
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- ;;
-
-mingw* | pw32*)
- # Base MSYS/MinGW do not provide the 'file' command needed by
- # func_win32_libid shell function, so use a weaker test based on 'objdump',
- # unless we find 'file', for example because we are cross-compiling.
- if ( file / ) >/dev/null 2>&1; then
- lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
- lt_cv_file_magic_cmd='func_win32_libid'
- else
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='$OBJDUMP -f'
- fi
- ;;
-
-darwin* | rhapsody*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-freebsd* | dragonfly*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case $host_cpu in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20* | hpux11*)
- lt_cv_file_magic_cmd=/usr/bin/file
- case $host_cpu in
- ia64*)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
- lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
- ;;
- hppa*64*)
- [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
- lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
- ;;
- *)
- lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
- esac
- ;;
-
-interix[[3-9]]*)
- # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
- ;;
-
-irix5* | irix6* | nonstopux*)
- case $LD in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
- fi
- ;;
-
-newos6*)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libnls.so
- ;;
-
-nto-qnx*)
- lt_cv_deplibs_check_method=unknown
- ;;
-
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
- else
- lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-rdos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sysv4 | sysv4.3*)
- case $host_vendor in
- motorola)
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- sequent)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
- ;;
- sni)
- lt_cv_file_magic_cmd='/bin/file'
- lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
- siemens)
- lt_cv_deplibs_check_method=pass_all
- ;;
- pc)
- lt_cv_deplibs_check_method=pass_all
- ;;
- esac
- ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-])# AC_DEPLIBS_CHECK_METHOD
-
-
-# AC_PROG_NM
-# ----------
-# find the pathname to a BSD-compatible name lister
-AC_DEFUN([AC_PROG_NM],
-[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- lt_cv_path_NM="$NM"
-else
- lt_nm_to_check="${ac_tool_prefix}nm"
- if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
- lt_nm_to_check="$lt_nm_to_check nm"
- fi
- for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
- for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
- test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
- lt_cv_path_NM="$tmp_nm -B"
- break
- ;;
- *)
- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
- */dev/null*)
- lt_cv_path_NM="$tmp_nm -p"
- break
- ;;
- *)
- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- ;;
- esac
- ;;
- esac
- fi
- done
- IFS="$lt_save_ifs"
- done
- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
-fi])
-NM="$lt_cv_path_NM"
-])# AC_PROG_NM
-
-
-# AC_CHECK_LIBM
-# -------------
-# check for math library
-AC_DEFUN([AC_CHECK_LIBM],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
- # These system don't have libm, or don't need it
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
- ;;
-esac
-])# AC_CHECK_LIBM
-
-
-# AC_LIBLTDL_CONVENIENCE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl convenience library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-convenience to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# it is assumed to be `libltdl'. LIBLTDL will be prefixed with
-# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/'
-# (note the single quotes!). If your package is not flat and you're not
-# using automake, define top_builddir and top_srcdir appropriately in
-# the Makefiles.
-AC_DEFUN([AC_LIBLTDL_CONVENIENCE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case $enable_ltdl_convenience in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_CONVENIENCE
-
-
-# AC_LIBLTDL_INSTALLABLE([DIRECTORY])
-# -----------------------------------
-# sets LIBLTDL to the link flags for the libltdl installable library and
-# LTDLINCL to the include flags for the libltdl header and adds
-# --enable-ltdl-install to the configure arguments. Note that
-# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided,
-# and an installed libltdl is not found, it is assumed to be `libltdl'.
-# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and top_srcdir
-# appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN([AC_LIBLTDL_INSTALLABLE],
-[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, lt_dlinit,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- LTDLINCL=
- fi
- # For backwards non-gettext consistent compatibility...
- INCLTDL="$LTDLINCL"
-])# AC_LIBLTDL_INSTALLABLE
-
-
-# AC_LIBTOOL_RC
-# -------------
-# enable support for Windows resource files
-AC_DEFUN([AC_LIBTOOL_RC],
-[AC_REQUIRE([LT_AC_PROG_RC])
-_LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC])
-])# AC_LIBTOOL_RC
-
-
-# AC_LIBTOOL_LANG_C_CONFIG
-# ------------------------
-# Ensure that the configuration vars for the C compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG])
-AC_DEFUN([_LT_AC_LANG_C_CONFIG],
-[lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1)
-AC_LIBTOOL_PROG_COMPILER_PIC($1)
-AC_LIBTOOL_PROG_CC_C_O($1)
-AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1)
-AC_LIBTOOL_PROG_LD_SHLIBS($1)
-AC_LIBTOOL_SYS_DYNAMIC_LINKER($1)
-AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1)
-AC_LIBTOOL_SYS_LIB_STRIP
-AC_LIBTOOL_DLOPEN_SELF
-
-# Report which library types will actually be built
-AC_MSG_CHECKING([if libtool supports shared libraries])
-AC_MSG_RESULT([$can_build_shared])
-
-AC_MSG_CHECKING([whether to build shared libraries])
-test "$can_build_shared" = "no" && enable_shared=no
-
-# On AIX, shared libraries and static libraries use the same namespace, and
-# are all built from PIC.
-case $host_os in
-aix3*)
- test "$enable_shared" = yes && enable_static=no
- if test -n "$RANLIB"; then
- archive_cmds="$archive_cmds~\$RANLIB \$lib"
- postinstall_cmds='$RANLIB $lib'
- fi
- ;;
-
-aix4* | aix5*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
- fi
- ;;
-esac
-AC_MSG_RESULT([$enable_shared])
-
-AC_MSG_CHECKING([whether to build static libraries])
-# Make sure either enable_shared or enable_static is yes.
-test "$enable_shared" = yes || enable_static=yes
-AC_MSG_RESULT([$enable_static])
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_POP
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_C_CONFIG
-
-
-# AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME])
-# ------------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library. It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-ifelse([$1],[],[cat > conftest.$ac_ext <<EOF
-int a;
-void foo (void) { a = 0; }
-EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
- # Parse the compiler output and extract the necessary
- # objects, libraries and library flags.
-
- # Sentinel used to keep track of whether or not we are before
- # the conftest object file.
- pre_test_object_deps_done=no
-
- # The `*' in the case matches for architectures that use `case' in
- # $output_verbose_cmd can trigger glob expansion during the loop
- # eval without this substitution.
- output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"`
-
- for p in `eval $output_verbose_link_cmd`; do
- case $p in
-
- -L* | -R* | -l*)
- # Some compilers place space between "-{L,R}" and the path.
- # Remove the space.
- if test $p = "-L" \
- || test $p = "-R"; then
- prev=$p
- continue
- else
- prev=
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- case $p in
- -L* | -R*)
- # Internal compiler library paths should come after those
- # provided the user. The postdeps already come after the
- # user supplied libs so there is no need to process them.
- if test -z "$_LT_AC_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(compiler_lib_search_path, $1)="${_LT_AC_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
- fi
- ;;
- # The "-l" case would never come before the object being
- # linked, so don't bother handling this case.
- esac
- else
- if test -z "$_LT_AC_TAGVAR(postdeps, $1)"; then
- _LT_AC_TAGVAR(postdeps, $1)="${prev}${p}"
- else
- _LT_AC_TAGVAR(postdeps, $1)="${_LT_AC_TAGVAR(postdeps, $1)} ${prev}${p}"
- fi
- fi
- ;;
-
- *.$objext)
- # This assumes that the test object file only shows up
- # once in the compiler output.
- if test "$p" = "conftest.$objext"; then
- pre_test_object_deps_done=yes
- continue
- fi
-
- if test "$pre_test_object_deps_done" = no; then
- if test -z "$_LT_AC_TAGVAR(predep_objects, $1)"; then
- _LT_AC_TAGVAR(predep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(predep_objects, $1)="$_LT_AC_TAGVAR(predep_objects, $1) $p"
- fi
- else
- if test -z "$_LT_AC_TAGVAR(postdep_objects, $1)"; then
- _LT_AC_TAGVAR(postdep_objects, $1)="$p"
- else
- _LT_AC_TAGVAR(postdep_objects, $1)="$_LT_AC_TAGVAR(postdep_objects, $1) $p"
- fi
- fi
- ;;
-
- *) ;; # Ignore the rest.
-
- esac
- done
-
- # Clean up.
- rm -f a.out a.exe
-else
- echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$rm -f confest.$objext
-
-case " $_LT_AC_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
-])# AC_LIBTOOL_POSTDEP_PREDEP
-
-
-# AC_LIBTOOL_LANG_RC_CONFIG
-# -------------------------
-# Ensure that the configuration vars for the Windows resource compiler are
-# suitably defined. Those variables are subsequently used by
-# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'.
-AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)])
-AC_DEFUN([_LT_AC_LANG_RC_CONFIG],
-[AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_AC_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_AC_SYS_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-CC=${RC-"windres"}
-compiler=$CC
-_LT_AC_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-AC_LIBTOOL_CONFIG($1)
-
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# AC_LIBTOOL_LANG_RC_CONFIG
-
-
-# AC_LIBTOOL_CONFIG([TAGNAME])
-# ----------------------------
-# If TAGNAME is not passed, then create an initial libtool script
-# with a default configuration from the untagged config vars. Otherwise
-# add code to config.status for appending the configuration named by
-# TAGNAME from the matching tagged config vars.
-AC_DEFUN([AC_LIBTOOL_CONFIG],
-[# The else clause should only fire when bootstrapping the
-# libtool distribution, otherwise you forgot to ship ltmain.sh
-# with your package, and you will get complaints that there are
-# no rules to generate ltmain.sh.
-if test -f "$ltmain"; then
- # See if we are running on zsh, and set the options which allow our commands through
- # without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
- setopt NO_GLOB_SUBST
- fi
- # Now quote all the things that may contain metacharacters while being
- # careful not to overquote the AC_SUBSTed values. We take copies of the
- # variables and quote the copies for generation of the libtool script.
- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \
- SED SHELL STRIP \
- libname_spec library_names_spec soname_spec extract_expsyms_cmds \
- old_striplib striplib file_magic_cmd finish_cmds finish_eval \
- deplibs_check_method reload_flag reload_cmds need_locks \
- lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
- lt_cv_sys_global_symbol_to_c_name_address \
- sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
- old_postinstall_cmds old_postuninstall_cmds \
- _LT_AC_TAGVAR(compiler, $1) \
- _LT_AC_TAGVAR(CC, $1) \
- _LT_AC_TAGVAR(LD, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \
- _LT_AC_TAGVAR(old_archive_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \
- _LT_AC_TAGVAR(predep_objects, $1) \
- _LT_AC_TAGVAR(postdep_objects, $1) \
- _LT_AC_TAGVAR(predeps, $1) \
- _LT_AC_TAGVAR(postdeps, $1) \
- _LT_AC_TAGVAR(compiler_lib_search_path, $1) \
- _LT_AC_TAGVAR(archive_cmds, $1) \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) \
- _LT_AC_TAGVAR(postinstall_cmds, $1) \
- _LT_AC_TAGVAR(postuninstall_cmds, $1) \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \
- _LT_AC_TAGVAR(allow_undefined_flag, $1) \
- _LT_AC_TAGVAR(no_undefined_flag, $1) \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \
- _LT_AC_TAGVAR(hardcode_automatic, $1) \
- _LT_AC_TAGVAR(module_cmds, $1) \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) \
- _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \
- _LT_AC_TAGVAR(fix_srcfile_path, $1) \
- _LT_AC_TAGVAR(exclude_expsyms, $1) \
- _LT_AC_TAGVAR(include_expsyms, $1); do
-
- case $var in
- _LT_AC_TAGVAR(old_archive_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \
- _LT_AC_TAGVAR(archive_cmds, $1) | \
- _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(module_cmds, $1) | \
- _LT_AC_TAGVAR(module_expsym_cmds, $1) | \
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \
- _LT_AC_TAGVAR(export_symbols_cmds, $1) | \
- extract_expsyms_cmds | reload_cmds | finish_cmds | \
- postinstall_cmds | postuninstall_cmds | \
- old_postinstall_cmds | old_postuninstall_cmds | \
- sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
- # Double-quote double-evaled strings.
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
- ;;
- *)
- eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
- ;;
- esac
- done
-
- case $lt_echo in
- *'\[$]0 --fallback-echo"')
- lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'`
- ;;
- esac
-
-ifelse([$1], [],
- [cfgfile="${ofile}T"
- trap "$rm \"$cfgfile\"; exit 1" 1 2 15
- $rm -f "$cfgfile"
- AC_MSG_NOTICE([creating $ofile])],
- [cfgfile="$ofile"])
-
- cat <<__EOF__ >> "$cfgfile"
-ifelse([$1], [],
-[#! $SHELL
-
-# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
-# Free Software Foundation, Inc.
-#
-# This file is part of GNU Libtool:
-# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-#
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# A sed program that does not truncate output.
-SED=$lt_SED
-
-# Sed that helps us avoid accidentally triggering echo(1) options like -n.
-Xsed="$SED -e 1s/^X//"
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-# The names of the tagged configurations supported by this script.
-available_tags=
-
-# ### BEGIN LIBTOOL CONFIG],
-[# ### BEGIN LIBTOOL TAG CONFIG: $tagname])
-
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-
-# Shell to use when invoking shell scripts.
-SHELL=$lt_SHELL
-
-# Whether or not to build shared libraries.
-build_libtool_libs=$enable_shared
-
-# Whether or not to build static libraries.
-build_old_libs=$enable_static
-
-# Whether or not to add -lc for building shared libraries.
-build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)
-
-# Whether or not to disallow shared libs when runtime libs are static
-allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)
-
-# Whether or not to optimize for fast installation.
-fast_install=$enable_fast_install
-
-# The host system.
-host_alias=$host_alias
-host=$host
-host_os=$host_os
-
-# The build system.
-build_alias=$build_alias
-build=$build
-build_os=$build_os
-
-# An echo program that does not interpret backslashes.
-echo=$lt_echo
-
-# The archiver.
-AR=$lt_AR
-AR_FLAGS=$lt_AR_FLAGS
-
-# A C compiler.
-LTCC=$lt_LTCC
-
-# LTCC compiler flags.
-LTCFLAGS=$lt_LTCFLAGS
-
-# A language-specific compiler.
-CC=$lt_[]_LT_AC_TAGVAR(compiler, $1)
-
-# Is the compiler the GNU C compiler?
-with_gcc=$_LT_AC_TAGVAR(GCC, $1)
-
-# An ERE matcher.
-EGREP=$lt_EGREP
-
-# The linker used to build libraries.
-LD=$lt_[]_LT_AC_TAGVAR(LD, $1)
-
-# Whether we need hard or soft links.
-LN_S=$lt_LN_S
-
-# A BSD-compatible nm program.
-NM=$lt_NM
-
-# A symbol stripping program
-STRIP=$lt_STRIP
-
-# Used to examine libraries when file_magic_cmd begins "file"
-MAGIC_CMD=$MAGIC_CMD
-
-# Used on cygwin: DLL creation program.
-DLLTOOL="$DLLTOOL"
-
-# Used on cygwin: object dumper.
-OBJDUMP="$OBJDUMP"
-
-# Used on cygwin: assembler.
-AS="$AS"
-
-# The name of the directory that contains temporary libtool files.
-objdir=$objdir
-
-# How to create reloadable object files.
-reload_flag=$lt_reload_flag
-reload_cmds=$lt_reload_cmds
-
-# How to pass a linker flag through the compiler.
-wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
-
-# Object file suffix (normally "o").
-objext="$ac_objext"
-
-# Old archive suffix (normally "a").
-libext="$libext"
-
-# Shared library suffix (normally ".so").
-shrext_cmds='$shrext_cmds'
-
-# Executable file suffix (normally "").
-exeext="$exeext"
-
-# Additional compiler flags for building library objects.
-pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
-pic_mode=$pic_mode
-
-# What is the maximum length of a command?
-max_cmd_len=$lt_cv_sys_max_cmd_len
-
-# Does compiler simultaneously support -c and -o options?
-compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)
-
-# Must we lock files when doing compilation?
-need_locks=$lt_need_locks
-
-# Do we need the lib prefix for modules?
-need_lib_prefix=$need_lib_prefix
-
-# Do we need a version for libraries?
-need_version=$need_version
-
-# Whether dlopen is supported.
-dlopen_support=$enable_dlopen
-
-# Whether dlopen of programs is supported.
-dlopen_self=$enable_dlopen_self
-
-# Whether dlopen of statically linked programs is supported.
-dlopen_self_static=$enable_dlopen_self_static
-
-# Compiler flag to prevent dynamic linking.
-link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1)
-
-# Compiler flag to turn off builtin functions.
-no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)
-
-# Compiler flag to allow reflexive dlopens.
-export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)
-
-# Compiler flag to generate shared objects directly from archives.
-whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1)
-
-# Compiler flag to generate thread-safe objects.
-thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1)
-
-# Library versioning type.
-version_type=$version_type
-
-# Format of library name prefix.
-libname_spec=$lt_libname_spec
-
-# List of archive names. First name is the real one, the rest are links.
-# The last name is the one that the linker finds with -lNAME.
-library_names_spec=$lt_library_names_spec
-
-# The coded name of the library, if different from the real name.
-soname_spec=$lt_soname_spec
-
-# Commands used to build and install an old-style archive.
-RANLIB=$lt_RANLIB
-old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1)
-old_postinstall_cmds=$lt_old_postinstall_cmds
-old_postuninstall_cmds=$lt_old_postuninstall_cmds
-
-# Create an old-style archive from a shared archive.
-old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1)
-
-# Create a temporary old-style archive to link instead of a shared archive.
-old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)
-
-# Commands used to build and install a shared archive.
-archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1)
-archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1)
-postinstall_cmds=$lt_postinstall_cmds
-postuninstall_cmds=$lt_postuninstall_cmds
-
-# Commands used to build a loadable module (assumed same as above if empty)
-module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1)
-module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1)
-
-# Commands to strip libraries.
-old_striplib=$lt_old_striplib
-striplib=$lt_striplib
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1)
-
-# Dependencies to place before the objects being linked to create a
-# shared library.
-predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1)
-
-# Dependencies to place after the objects being linked to create a
-# shared library.
-postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1)
-
-# The library search path used internally by the compiler when linking
-# a shared library.
-compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1)
-
-# Method to check whether dependent libraries are shared objects.
-deplibs_check_method=$lt_deplibs_check_method
-
-# Command to use when deplibs_check_method == file_magic.
-file_magic_cmd=$lt_file_magic_cmd
-
-# Flag that allows shared libraries with undefined symbols to be built.
-allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1)
-
-# Flag that forces no undefined symbols.
-no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1)
-
-# Commands used to finish a libtool library installation in a directory.
-finish_cmds=$lt_finish_cmds
-
-# Same as above, but a single script fragment to be evaled but not shown.
-finish_eval=$lt_finish_eval
-
-# Take the output of nm and produce a listing of raw symbols and C names.
-global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
-
-# Transform the output of nm in a proper C declaration
-global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
-
-# Transform the output of nm in a C name address pair
-global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
-
-# This is the shared library runtime path variable.
-runpath_var=$runpath_var
-
-# This is the shared library path variable.
-shlibpath_var=$shlibpath_var
-
-# Is shlibpath searched before the hard-coded library search path?
-shlibpath_overrides_runpath=$shlibpath_overrides_runpath
-
-# How to hardcode a shared library path into an executable.
-hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1)
-
-# Whether we should hardcode library paths into libraries.
-hardcode_into_libs=$hardcode_into_libs
-
-# Flag to hardcode \$libdir into a binary during linking.
-# This must work even if \$libdir does not exist.
-hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)
-
-# If ld is used when linking, flag to hardcode \$libdir into
-# a binary during linking. This must work even if \$libdir does
-# not exist.
-hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)
-
-# Whether we need a single -rpath flag with a separated argument.
-hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1)
-
-# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
-# resulting binary.
-hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1)
-
-# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
-# resulting binary.
-hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1)
-
-# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
-# the resulting binary.
-hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)
-
-# Set to yes if building a shared library automatically hardcodes DIR into the library
-# and all subsequent libraries and executables linked against it.
-hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1)
-
-# Variables whose values should be saved in libtool wrapper scripts and
-# restored at relink time.
-variables_saved_for_relink="$variables_saved_for_relink"
-
-# Whether libtool must link a program against all its dependency libraries.
-link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1)
-
-# Compile-time system search path for libraries
-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-
-# Run-time system search path for libraries
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
-
-# Fix the shell variable \$srcfile for the compiler.
-fix_srcfile_path=$lt_fix_srcfile_path
-
-# Set to yes if exported symbols are required.
-always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1)
-
-# The commands to list exported symbols.
-export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1)
-
-# The commands to extract the exported symbol list from a shared archive.
-extract_expsyms_cmds=$lt_extract_expsyms_cmds
-
-# Symbols that should not be listed in the preloaded symbols.
-exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1)
-
-# Symbols that must always be exported.
-include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1)
-
-ifelse([$1],[],
-[# ### END LIBTOOL CONFIG],
-[# ### END LIBTOOL TAG CONFIG: $tagname])
-
-__EOF__
-
-ifelse([$1],[], [
- case $host_os in
- aix3*)
- cat <<\EOF >> "$cfgfile"
-
-# AIX sometimes has problems with the GCC collect2 program. For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
- COLLECT_NAMES=
- export COLLECT_NAMES
-fi
-EOF
- ;;
- esac
-
- # We use sed instead of cat because bash on DJGPP gets confused if
- # if finds mixed CR/LF and LF-only lines. Since sed operates in
- # text mode, it properly converts lines to CR/LF. This bash problem
- # is reportedly fixed, but why not run on old versions too?
- sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
-
- mv -f "$cfgfile" "$ofile" || \
- (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
- chmod +x "$ofile"
-])
-else
- # If there is no Makefile yet, we rely on a make rule to execute
- # `config.status --recheck' to rerun these tests and create the
- # libtool script then.
- ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'`
- if test -f "$ltmain_in"; then
- test -f Makefile && make "$ltmain"
- fi
-fi
-])# AC_LIBTOOL_CONFIG
-
-
-# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI],
-[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl
-
-_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
- AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
- lt_cv_prog_compiler_rtti_exceptions,
- [-fno-rtti -fno-exceptions], [],
- [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI
-
-
-# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-# ---------------------------------
-AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE],
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([LT_AC_PROG_SED])
-AC_REQUIRE([AC_PROG_NM])
-AC_REQUIRE([AC_OBJEXT])
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix. What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Transform an extracted symbol line into a proper C declaration
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
-
-# Define system-specific variables.
-case $host_os in
-aix*)
- symcode='[[BCDT]]'
- ;;
-cygwin* | mingw* | pw32*)
- symcode='[[ABCDGISTW]]'
- ;;
-hpux*) # Its linker distinguishes data from code symbols
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDEGRST]]'
- fi
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- ;;
-linux* | k*bsd*-gnu)
- if test "$host_cpu" = ia64; then
- symcode='[[ABCDGIRSTW]]'
- lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
- lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
- fi
- ;;
-irix* | nonstopux*)
- symcode='[[BCDEGRST]]'
- ;;
-osf*)
- symcode='[[BCDEGQRST]]'
- ;;
-solaris*)
- symcode='[[BDRT]]'
- ;;
-sco3.2v5*)
- symcode='[[DT]]'
- ;;
-sysv4.2uw2*)
- symcode='[[DT]]'
- ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
- symcode='[[ABDT]]'
- ;;
-sysv4)
- symcode='[[DFNSTU]]'
- ;;
-esac
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
- symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
- symxfrm="\\1 $ac_symprfx\\2 \\2"
-
- # Write the raw and C identifiers.
- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- pipe_works=no
-
- rm -f conftest*
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
- # Try sorting and uniquifying the output.
- if sort "$nlist" | uniq > "$nlist"T; then
- mv -f "$nlist"T "$nlist"
- else
- rm -f "$nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if grep ' nm_test_var$' "$nlist" >/dev/null; then
- if grep ' nm_test_func$' "$nlist" >/dev/null; then
- cat <<EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
-
- cat <<EOF >> conftest.$ac_ext
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-lt_preloaded_symbols[[]] =
-{
-EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
- cat <<\EOF >> conftest.$ac_ext
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- lt_save_LIBS="$LIBS"
- lt_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
- pipe_works=yes
- fi
- LIBS="$lt_save_LIBS"
- CFLAGS="$lt_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
- fi
- else
- echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
- cat conftest.$ac_ext >&5
- fi
- rm -f conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
- break
- else
- lt_cv_sys_global_symbol_pipe=
- fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
- lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
- AC_MSG_RESULT(failed)
-else
- AC_MSG_RESULT(ok)
-fi
-]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE
-
-
-# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME])
-# ---------------------------------------
-AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC],
-[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
- case $host_os in
- aix*)
- # All AIX code is PIC.
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- amigaos*)
- # FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
- ;;
-
- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
- # PIC is the default for these OSes.
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- # Although the cygwin gcc ignores -fPIC, still need this for old-style
- # (--disable-auto-import) libraries
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- darwin* | rhapsody*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
- ;;
-
- interix[[3-9]]*)
- # Interix 3.x gcc -fpic/-fPIC options generate broken code.
- # Instead, we relocate shared libraries at runtime.
- ;;
-
- msdosdjgpp*)
- # Just because we use GCC doesn't mean we suddenly get shared libraries
- # on systems that don't support them.
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- enable_shared=no
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
- fi
- ;;
-
- hpux*)
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
- ;;
- esac
- else
- # PORTME Check for flag to pass linker flags through the system compiler.
- case $host_os in
- aix*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
- # AIX 5 now supports IA64 processor
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- else
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
- fi
- ;;
- darwin*)
- # PIC is the default on this platform
- # Common symbols not allowed in MH_DYLIB files
- case $cc_basename in
- xlc*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- esac
- ;;
-
- mingw* | cygwin* | pw32* | os2*)
- # This hack is so that the source file can tell whether it is being
- # built for inclusion in a dll (and should export symbols for example).
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'
- ;;
-
- hpux9* | hpux10* | hpux11*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
- # not for PA HP-UX.
- case $host_cpu in
- hppa*64*|ia64*)
- # +Z the default
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
- ;;
- esac
- # Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- ;;
-
- irix5* | irix6* | nonstopux*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # PIC (with -KPIC) is the default.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- linux* | k*bsd*-gnu)
- case $cc_basename in
- icc* | ecc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static'
- ;;
- pgcc* | pgf77* | pgf90* | pgf95*)
- # Portland Group compilers (*not* the Pentium gcc compiler,
- # which looks to be a dead project)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
- ccc*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All Alpha code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
- *)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C 5.9
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- ;;
- *Sun\ F*)
- # Sun Fortran 8.3 passes all unrecognized flags to the linker
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)=''
- ;;
- esac
- ;;
- esac
- ;;
-
- osf3* | osf4* | osf5*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- # All OSF/1 code is PIC.
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- rdos*)
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- case $cc_basename in
- f77* | f90* | f95*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4 | sysv4.2uw2* | sysv4.3*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec ;then
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- fi
- ;;
-
- sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- unicos*)
- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
- ;;
-
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
- ;;
- esac
- fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then
- AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works],
- _LT_AC_TAGVAR(lt_cv_prog_compiler_pic_works, $1),
- [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC])], [],
- [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in
- "" | " "*) ;;
- *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;;
- esac],
- [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
- *djgpp*)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=
- ;;
- *)
- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC])"
- ;;
-esac
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\"
-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
- _LT_AC_TAGVAR(lt_cv_prog_compiler_static_works, $1),
- $lt_tmp_static_flag,
- [],
- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=])
-])
-
-
-# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME])
-# ------------------------------------
-# See if the linker supports building shared libraries.
-AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS],
-[AC_REQUIRE([LT_AC_PROG_SED])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
- runpath_var=
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no
- _LT_AC_TAGVAR(archive_cmds, $1)=
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)=
- _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- _LT_AC_TAGVAR(thread_safe_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown
- _LT_AC_TAGVAR(hardcode_automatic, $1)=no
- _LT_AC_TAGVAR(module_cmds, $1)=
- _LT_AC_TAGVAR(module_expsym_cmds, $1)=
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
- # include_expsyms should be a list of space-separated symbols to be *always*
- # included in the symbol list
- _LT_AC_TAGVAR(include_expsyms, $1)=
- # exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
- _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_"
- # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
- # platforms (ab)use it in PIC code, but their linkers get confused if
- # the symbol is explicitly referenced. Since portable code cannot
- # rely on this symbol name, it's probably fine to never include it in
- # preloaded symbol tables.
- extract_expsyms_cmds=
- # Just being paranoid about ensuring that cc_basename is set.
- _LT_CC_BASENAME([$compiler])
- case $host_os in
- cygwin* | mingw* | pw32*)
- # FIXME: the MSVC++ port hasn't been tested in a loooong time
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- if test "$GCC" != yes; then
- with_gnu_ld=no
- fi
- ;;
- interix*)
- # we just hope/assume this is gcc and not c89 (= MSVC++)
- with_gnu_ld=yes
- ;;
- openbsd*)
- with_gnu_ld=no
- ;;
- esac
-
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- if test "$with_gnu_ld" = yes; then
- # If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
-
- # Set some defaults for GNU ld with shared library support. These
- # are reset later if shared libraries are not supported. Putting them
- # here allows them to be overridden if necessary.
- runpath_var=LD_RUN_PATH
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- # ancient GNU ld didn't support --whole-archive et. al.
- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- supports_anon_versioning=no
- case `$LD -v 2>/dev/null` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
- *\ 2.11.*) ;; # other 2.11 versions
- *) supports_anon_versioning=yes ;;
- esac
-
- # See if GNU ld supports shared libraries.
- case $host_os in
- aix3* | aix4* | aix5*)
- # On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support. If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-EOF
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
-
- # Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
- # that the semantics of dynamic libraries on AmigaOS, at least up
- # to version 4, is to share data among multiple programs linked
- # with the same dynamic library. Since this doesn't match the
- # behavior of shared libraries on other platforms, we can't use
- # them.
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- beos*)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
- # support --undefined. This deserves some investigation. FIXME
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- cygwin* | mingw* | pw32*)
- # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
- # as there is no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=no
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
- if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- interix[[3-9]]*)
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
- # Instead, shared libraries are loaded at an image base (0x10000000 by
- # default) and relocated if they conflict, which is a slow very memory
- # consuming and fragmenting process. To avoid this, we pick a random,
- # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
- # time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- ;;
-
- gnu* | linux* | k*bsd*-gnu)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- tmp_addflag=
- case $cc_basename,$host_cpu in
- pgcc*) # Portland Group C compiler
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag'
- ;;
- pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_addflag=' $pic_flag -Mnomain' ;;
- ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
- tmp_addflag=' -i_dynamic' ;;
- efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64
- tmp_addflag=' -i_dynamic -nofor_main' ;;
- ifc* | ifort*) # Intel Fortran compiler
- tmp_addflag=' -nofor_main' ;;
- esac
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*) # Sun C 5.9
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive'
- tmp_sharedflag='-G' ;;
- *Sun\ F*) # Sun Fortran 8.3
- tmp_sharedflag='-G' ;;
- *)
- tmp_sharedflag='-shared' ;;
- esac
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
- if test $supports_anon_versioning = yes; then
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- $echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
- wlarc=
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- fi
- ;;
-
- solaris*)
- if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-EOF
- elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
- case `$LD -v 2>&1` in
- *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems. Therefore, libtool
-*** is disabling shared libraries support. We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
- ;;
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
- ;;
-
- sunos4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- wlarc=
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
- esac
-
- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then
- runpath_var=
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=
- fi
- else
- # PORTME fill in a description of your system's linker (not GNU ld)
- case $host_os in
- aix3*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
- # Note: this linker hardcodes the directories in LIBPATH if there
- # are no directories specified by -L.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
- # Neither direct hardcoding nor static linking is supported with a
- # broken collect2.
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- fi
- ;;
-
- aix4* | aix5*)
- if test "$host_cpu" = ia64; then
- # On IA64, the linker does run time linking by default, so we don't
- # have to do anything special.
- aix_use_runtimelinking=no
- exp_sym_flag='-Bexport'
- no_entry_flag=""
- else
- # If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- else
- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols'
- fi
- aix_use_runtimelinking=no
-
- # Test if we are trying to use run time linking or normal
- # AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
- case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*)
- for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
- aix_use_runtimelinking=yes
- break
- fi
- done
- ;;
- esac
-
- exp_sym_flag='-bexport'
- no_entry_flag='-bnoentry'
- fi
-
- # When large executables or shared objects are built, AIX ld can
- # have problems creating the table of contents. If linking a library
- # or program results in "error TOC overflow" add -mminimal-toc to
- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
- _LT_AC_TAGVAR(archive_cmds, $1)=''
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
-
- if test "$GCC" = yes; then
- case $host_os in aix4.[[012]]|aix4.[[012]].*)
- # We only want to do this on AIX 4.2 and lower, the check
- # below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
- if test -f "$collect2name" && \
- strings "$collect2name" | grep resolve_lib_name >/dev/null
- then
- # We have reworked collect2
- :
- else
- # We have old collect2
- _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported
- # It fails to find uninstalled libraries when the uninstalled
- # path is not listed in the libpath. Setting hardcode_minus_L
- # to unsupported forces relinking
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=
- fi
- ;;
- esac
- shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
- fi
- else
- # not using gcc
- if test "$host_cpu" = ia64; then
- # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
- # chokes on -Wl,-G. The following line is correct:
- shared_flag='-G'
- else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
- else
- shared_flag='${wl}-bM:SRE'
- fi
- fi
- fi
-
- # It seems that -bexpall does not export symbols beginning with
- # underscore (_), so it is better to generate a list of symbols to export.
- _LT_AC_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
- # Warning - without using the other runtime loading flags (-brtl),
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok'
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
- else
- if test "$host_cpu" = ia64; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
- else
- # Determine the default libpath from the value encoded in an empty executable.
- _LT_AC_SYS_LIBPATH_AIX
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- # Warning - without using the other run time loading flags,
- # -berok will link without error, but may produce a broken library.
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- # Exported symbols can be pulled into shared objects from archives
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
- fi
- fi
- ;;
-
- amigaos*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- # see comment about different semantics on the GNU ld section
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- bsdi[[45]]*)
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
- ;;
-
- cygwin* | mingw* | pw32*)
- # When not using gcc, we currently assume that we are using
- # Microsoft Visual C++.
- # hardcode_libdir_flag_spec is actually meaningless, as there is
- # no search path for DLLs.
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- # Tell ltmain to make .lib files, not .a files.
- libext=lib
- # Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
- # FIXME: Setting linknames here is a bad hack.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
- # The linker will automatically build a .lib file if we build a DLL.
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true'
- # FIXME: Should let the user specify the lib program.
- _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
- _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
- _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
- ;;
-
- darwin* | rhapsody*)
- case $host_os in
- rhapsody* | darwin1.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress'
- ;;
- *) # Darwin 1.3 on
- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- else
- case ${MACOSX_DEPLOYMENT_TARGET} in
- 10.[[012]])
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress'
- ;;
- 10.*)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup'
- ;;
- esac
- fi
- ;;
- esac
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=''
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- if test "$GCC" = yes ; then
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- else
- case $cc_basename in
- xlc*)
- output_verbose_link_cmd='echo'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring'
- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags'
- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
- ;;
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
- ;;
-
- dgux*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- freebsd1*)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
- # support. Future versions do this automatically, but an explicit c++rt0.o
- # does not break anything, and helps significantly (at the cost of a little
- # extra space).
- freebsd2.2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # Unfortunately, older versions of FreeBSD 2 do not have this feature.
- freebsd2*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
- freebsd* | dragonfly*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- hpux9*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- ;;
-
- hpux10*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- fi
- ;;
-
- hpux11*)
- if test "$GCC" = yes -a "$with_gnu_ld" = no; then
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- else
- case $host_cpu in
- hppa*64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- ia64*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
- ;;
- esac
- fi
- if test "$with_gnu_ld" = no; then
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
-
- case $host_cpu in
- hppa*64*|ia64*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
- *)
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
- # hardcode_minus_L: Not really in the search PATH,
- # but as the default location of the library.
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- ;;
- esac
- fi
- ;;
-
- irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- newsos6)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- openbsd*)
- if test -f /usr/libexec/ld.so; then
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
- fi
- else
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- fi
- ;;
-
- os2*)
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
- ;;
-
- osf3*)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- else
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp'
-
- # Both c and cxx compiler support -rpath directly
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
- ;;
-
- solaris*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp'
- else
- wlarc=''
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- case $host_os in
- solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
- *)
- # The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
- # but is careful enough not to reorder.
- # Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
- else
- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
- fi
- ;;
- esac
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- ;;
-
- sunos4*)
- if test "x$host_vendor" = xsequent; then
- # Use $CC to link under sequent, because it throws in some extra .o
- # files that make .init and .fini sections work.
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
- fi
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes
- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4)
- case $host_vendor in
- sni)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true???
- ;;
- siemens)
- ## LD is ld it makes a PLAMLIB
- ## CC just makes a GrossModule.
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no
- ;;
- motorola)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
- ;;
- esac
- runpath_var='LD_RUN_PATH'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- sysv4.3*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
- ;;
-
- sysv4*MP*)
- if test -d /usr/nec; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var=LD_RUN_PATH
- hardcode_runpath_var=yes
- _LT_AC_TAGVAR(ld_shlibs, $1)=yes
- fi
- ;;
-
- sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
- # link with -lc, and that would cause any symbols used from libc to
- # always be unresolved, which means just about no library would
- # ever link correctly. If we're not using GNU ld we use -z text
- # though, which does catch some bad symbols but isn't as heavy-handed
- # as -z defs.
- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`'
- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':'
- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
- runpath_var='LD_RUN_PATH'
-
- if test "$GCC" = yes; then
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- else
- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags'
- fi
- ;;
-
- uts4*)
- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no
- ;;
-
- *)
- _LT_AC_TAGVAR(ld_shlibs, $1)=no
- ;;
- esac
- fi
-AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)])
-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
- # Assume -lc should be added
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
-
- if test "$enable_shared" = yes && test "$GCC" = yes; then
- case $_LT_AC_TAGVAR(archive_cmds, $1) in
- *'~'*)
- # FIXME: we may have to deal with multi-command sequences.
- ;;
- '$CC '*)
- # Test whether the compiler implicitly links with -lc since on some
- # systems, -lgcc has to come before -lc. If gcc already passes -lc
- # to ld, don't add -lc before -lgcc.
- AC_MSG_CHECKING([whether -lc should be explicitly linked in])
- $rm conftest*
- echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
- if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
- soname=conftest
- lib=conftest
- libobjs=conftest.$ac_objext
- deplibs=
- wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)
- pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)
- compiler_flags=-v
- linker_flags=-v
- verstring=
- output_objdir=.
- libname=conftest
- lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1)
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=
- if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1)
- then
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
- else
- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes
- fi
- _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
- else
- cat conftest.err 1>&5
- fi
- $rm conftest*
- AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)])
- ;;
- esac
- fi
- ;;
-esac
-])# AC_LIBTOOL_PROG_LD_SHLIBS
-
-
-# _LT_AC_FILE_LTDLL_C
-# -------------------
-# Be careful that the start marker always follows a newline.
-AC_DEFUN([_LT_AC_FILE_LTDLL_C], [
-# /* ltdll.c starts here */
-# #define WIN32_LEAN_AND_MEAN
-# #include <windows.h>
-# #undef WIN32_LEAN_AND_MEAN
-# #include <stdio.h>
-#
-# #ifndef __CYGWIN__
-# # ifdef __CYGWIN32__
-# # define __CYGWIN__ __CYGWIN32__
-# # endif
-# #endif
-#
-# #ifdef __cplusplus
-# extern "C" {
-# #endif
-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved);
-# #ifdef __cplusplus
-# }
-# #endif
-#
-# #ifdef __CYGWIN__
-# #include <cygwin/cygwin_dll.h>
-# DECLARE_CYGWIN_DLL( DllMain );
-# #endif
-# HINSTANCE __hDllInstance_base;
-#
-# BOOL APIENTRY
-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved)
-# {
-# __hDllInstance_base = hInst;
-# return TRUE;
-# }
-# /* ltdll.c ends here */
-])# _LT_AC_FILE_LTDLL_C
-
-
-# _LT_AC_TAGVAR(VARNAME, [TAGNAME])
-# ---------------------------------
-AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])])
-
-
-# old names
-AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL])
-AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)])
-AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)])
-AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)])
-AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)])
-AC_DEFUN([AM_PROG_LD], [AC_PROG_LD])
-AC_DEFUN([AM_PROG_NM], [AC_PROG_NM])
-
-# This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])
-
-AC_DEFUN([LT_AC_PROG_RC],
-[AC_CHECK_TOOL(RC, windres, no)
-])
-
-
-# Cheap backport of AS_EXECUTABLE_P and required macros
-# from Autoconf 2.59; we should not use $as_executable_p directly.
-
-# _AS_TEST_PREPARE
-# ----------------
-m4_ifndef([_AS_TEST_PREPARE],
-[m4_defun([_AS_TEST_PREPARE],
-[if test -x / >/dev/null 2>&1; then
- as_executable_p='test -x'
-else
- as_executable_p='test -f'
-fi
-])])# _AS_TEST_PREPARE
-
-# AS_EXECUTABLE_P
-# ---------------
-# Check whether a file is executable.
-m4_ifndef([AS_EXECUTABLE_P],
-[m4_defun([AS_EXECUTABLE_P],
-[AS_REQUIRE([_AS_TEST_PREPARE])dnl
-$as_executable_p $1[]dnl
-])])# AS_EXECUTABLE_P
-
-############################################################
-# NOTE: This macro has been submitted for inclusion into #
-# GNU Autoconf as AC_PROG_SED. When it is available in #
-# a released version of Autoconf we should remove this #
-# macro and use it instead. #
-############################################################
-# LT_AC_PROG_SED
-# --------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible. Prefer GNU sed if found.
-AC_DEFUN([LT_AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for lt_ac_prog in sed gsed; do
- for ac_exec_ext in '' $ac_executable_extensions; do
- if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then
- lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
- fi
- done
- done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
- cat /dev/null > conftest.in
- lt_ac_count=0
- echo $ECHO_N "0123456789$ECHO_C" >conftest.in
- # Check for GNU sed and select it if it is found.
- if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
- lt_cv_path_SED=$lt_ac_sed
- break
- fi
- while true; do
- cat conftest.in conftest.in >conftest.tmp
- mv conftest.tmp conftest.in
- cp conftest.in conftest.nl
- echo >>conftest.nl
- $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
- cmp -s conftest.out conftest.nl || break
- # 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
- lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
- lt_ac_max=$lt_ac_count
- lt_cv_path_SED=$lt_ac_sed
- fi
- done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])
-
-
dnl Add some custom macros for pacman and libalpm
dnl GCC_STACK_PROTECT_LIB

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.