Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-04-05Accept multiple package names to checkout with archco0.6Jason Chu
2008-04-05Fix a typo in archco -- now it has the proper urlJason Chu
2008-04-05Update extrapkg to use svn & archrelease instead of cvsJason Chu
2008-04-05Add arch{co,release,rm} to devtools and make them install properlyJason Chu
2008-03-17Set $HOME before dropping permissionsAaron Griffin
Because we need a root user to chroot, when we drop permissions to 'nobody', we're still using HOME=/root Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-02-07Correcting an error in e0f139ad0e2b4144c39fa4431d174f453eb0ca520.5.1Simo Leone
If only you could have seen the facepalming going on... Signed-off-by: Simo Leone <simo@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-06Add architecture-specific logic into extrapkgDan McGee
This change will remove 4 needless sed lines from the PKGBUILD we use on Arch for building this package and do the logic locally where it probably makes more sense anyway. $CARCH should always be present as we fail if we cannot find a correct makepkg.conf file in /etc/. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-06Change unionfs module loading0.5Simo Leone
Checking /proc/filesystems for unionfs is friendlier for kernels with unionfs builtin. Also, a total lack of unionfs now causes makechrootpkg to bail out. Signed-off-by: Simo Leone <simo@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-06Separate mounting from config copyingSimo Leone
Copying the configs before installing stuff caused conflicts. Running the host's pacman uses the host's configuration anyway, so there is no need to copy them in this case. Signed-off-by: Simo Leone <simo@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-29Add -r to the default makepkg argsAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Minor pathing cleanupsAaron Griffin
Reported-by: Jaroslaw Swierczynski <swiergot@juvepoland.com> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Check for existing files when copying to chrootAaron Griffin
Use basename when checking for files in the source array This allows us to actually check for pre-downloaded remote files and copy them to the build root as well. Original-work-by: Jaroslaw Swierczynski <swiergot@juvepoland.com> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Remove "use sudo" from default makechrootpkg makepkg argsAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Remove DBPath from mkarchrootAaron Griffin
No longer needed in pacman 3.1 Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Don't clear build dir upon completionAaron Griffin
Clear when creating the dir, and additionally DO not clear it if the user is attempting to repack the package. Original-work-by: Jaroslaw Swierczynski <swiergot@juvepoland.com> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Ensure scp'ing the package file works when PKGDEST is defined.Travis Willard
Make the call to scp use $(basename $pkgfile) so that we don't get oddness. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Ensure pkgurl is always fully-qualified pathname in checkpkg.Travis Willard
This keeps the pkgurl variable consistently fully-qualified, so that whenever we use that variable we know it points straight at the package file. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Improve makepkg config loading for checkpkg and extrapkg.Travis Willard
Now, checkpkg and extrapkg will fail if /etc/makepkg.conf doesn't exist, and will also try to load in personal user's settings in ~/.makepkg.conf Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Fix getopts bug and be more specific when moving package file.Travis Willard
My recent commit adding the -c option and renaming the old -c to -r accidentally left out the new '-r' option from the getopts call. Additionally, add ${pkgrel} to the mv line after building to be more specific about that file to move. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Copy makepkg.conf and ~/.makepkg.conf into chroot.Travis Willard
This change allows all packager-defined settings (such as PACKAGER or OPTIONS) to propogate into the chroot when building packages. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Output full path to package in finddepsDamir Perisa
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Added support for makepkg's PKGDEST and SRCDEST params.Travis Willard
This ensures that sources and packages built inside makechrootpkg go where the user expects them to, as defined in their /etc/makepkg.conf and ~/.makepkg.conf files. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Renamed -c option to -r (for "root") and added -c option (for clean).Travis Willard
The old -c option, which specified a 'chroot', has been renamed to -r, since most other scripts use -r for a different root. A new -c option is introduced, which cleans all files from ${chrootdir}/rw before beginning, thus ensuring a clean chroot. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2008-01-23Use full filename for scp uploadAaron Griffin
Fix an issue where a missing add directory causes the package to be uploaded as a file named "add" Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-28Copy resolv.conf each time just like mtabAaron Griffin
Resolv.conf changes, like mtab, so we can't just trust it to copy on build only Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-28Force symlink creation in the install targetAaron Griffin
Allows us to run 'make install' even if the symlinks exist (helpful for testing locally) Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-28Fixed a typo (mkarchchroot -> mkarchroot)Aaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-28Whitespace fixes/cleanup to all of the scriptsDan McGee
Add the same vim modeline to all the files, as well as cleanup the newly added scripts a bit. If you look at this diff with the -w option, you'll see it really isn't all that significant. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-28Add finddeps script from cvs-archAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-28Add lddd script from cvs-archAaron Griffin
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-28Use user's locale.gen instead of sed-magicDan McGee
The sed-magic was wrong in many cases, including my default locale: LANG=en_US.utf8 locale.gen line: en_US.UTF-8 If we copy the user's locale.gen file, we will generate all of their locales instead of just the current one. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-28Allow user to see invalid chrootpath in error messageDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-28Fix some bashisms (but change #! to /bin/bash)Dan McGee
We need to use bash due to the usage of arrays, but we might as well fix some bashisms that were used in the scripts anyways. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-11-27makechrootpkg: clarify usage messageArmin Luntzer
Signed-off-by: Jason Chu <jchu@xentac.net>
2007-11-27makechrootpkg: Check if build was successful. Copy package to cwd and ↵Armin Luntzer
cleanup $chrootdir/rw/build on success, keep directory contents on failure. Signed-off-by: Jason Chu <jchu@xentac.net>
2007-11-27mkarchroot: create $working_dir/etc (fixes error msg when trying to copy ↵Armin Luntzer
/etc/mtab during chroot creation) Signed-off-by: Jason Chu <jchu@xentac.net>
2007-11-27mkarchroot: copy /etc/resolv.conf to chrootArmin Luntzer
Signed-off-by: Jason Chu <jchu@xentac.net>
2007-11-27mkarchroot: add -M switch for a custom makepkg.confArmin Luntzer
Signed-off-by: Jason Chu <jchu@xentac.net>
2007-11-27Add an uninstall targetDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-27Clarify message when PKGBUILD does not exist and always have help availableDan McGee
makechrootpkg should check for a PKGBUILD and user credentials after the option to print usage is granted. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-11-04Make sure that build is owned by nobody, so that it can write to the directoryJason Chu
2007-11-04Pass $MAKEPKG_ARGS as separate parameters to makepkg instead of one big stringJason Chu
2007-11-04Call mkarchroot not ./mkarchroot so that we can use makechrootpkg from any ↵Jason Chu
directory
2007-11-04Escape the uniondir directory reference when creating $uniondir/etc/sudoers ↵Jason Chu
and set it to the proper permissions (440)
2007-11-04Copy the install file into the build directory because we need that tooJason Chu
2007-11-04Accept options to makepkg after a -- so that we can accept longopts for ↵Jason Chu
makepkg and even options that are used by makechrootpkg
2007-11-04Allow optional params to makechrootpkg (to actually accept extra makepkg args)Jason Chu
2007-11-04Copy mtab over to chroot so that pacman can detect disk spaceJason Chu
2007-11-04Pass $RUN to chroot so that all the params are expanded properlyJason Chu
2007-11-03Install the custom pacman.conf in the chroot so that it can be used for ↵Jason Chu
later updates