Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/docs/README.altbootmethods
diff options
context:
space:
mode:
Diffstat (limited to 'docs/README.altbootmethods')
-rw-r--r--docs/README.altbootmethods128
1 files changed, 128 insertions, 0 deletions
diff --git a/docs/README.altbootmethods b/docs/README.altbootmethods
new file mode 100644
index 0000000..ebe1c6e
--- /dev/null
+++ b/docs/README.altbootmethods
@@ -0,0 +1,128 @@
+INDEX
+-----
+
+* Alternative boot methods (configs/releng)
+ * ISO in loopback mode
+ * ISO in memdisk mode
+ * Network booting (PXE) [first stage]
+ * DHCP + TFTP
+ * DHCP + HTTP
+ * HTTP/NFS/NBD [second stage]
+
+
+
+*** Alternative boot methods (configs/releng)
+
+ISO images names consist of: archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso
+
+Where:
+ <YYYY> Year
+ <MM> Month
+ <DD> Day
+ <ARCH> i686 | x86_64 | dual(*)
+
+(*) "dual" includes both i686 and x86_64 architectures.
+
+
+** ISO in loopback mode.
+
+Note: Described method is for using with GRUB2.
+ GRUB2 is installed on target media and archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso
+ is at path <TARGET-PATH> on disk <D> and partition <P>,
+ where filesystem is labeled as <TARGET-FS-LABEL>.
+
+menuentry "Arch Linux (x86_64)" {
+ set isofile="/<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso"
+ loopback loop (hd<D>,<P>)$isofile
+ linux (loop)/arch/boot/x86_64/vmlinuz archisolabel=<FS-LABEL> img_label=<TARGET-FS-LABEL> img_loop=$isofile
+ initrd (loop)/arch/boot/x86_64/archiso.img
+}
+
+menuentry "Arch Linux (i686)" {
+ set isofile="/<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso"
+ loopback loop (hd<D>,<P>)$isofile
+ linux (loop)/arch/boot/i686/vmlinuz archisolabel=<FS-LABEL> img_label=<TARGET-FS-LABEL> img_loop=$isofile
+ initrd (loop)/arch/boot/i686/archiso.img
+}
+
+
+** ISO in memdisk mode.
+
+Note: Described method is for using with SYSLINUX. Anyway MEMDISK from SYSLINUX can work
+ with other bootloaders.
+ SYSLINUX is installed on target media and archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso
+ is at path <TARGET-PATH>.
+ On 32-bit systems, is needed to pass vmalloc=nnM to the kernel, where nn is the size
+ of the ISO image plus 64 MiB (or 128 MiB).
+
+
+LABEL arch_x64
+ LINUX memdisk
+ INITRD /<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso
+ APPEND iso
+
+LABEL arch_x32
+ LINUX memdisk
+ INITRD /<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-<ARCH>.iso
+ APPEND iso
+
+
+** Network booting (PXE).
+
+All ISOs are ready to act as PXE server, some manual steps are needed
+to setup the desired PXE boot mode.
+Alternatively it is possible to use an existing PXE server following the same logic.
+Note: Setup network first, adjust IP adresses, and respect all slashes "/".
+
+First stage is for loading kernel and initramfs via PXE, two methods described here:
+
+* DHCP + TFTP
+
+Note: All NIC firmwares should support this.
+
+# dnsmasq --port=0 \
+ --enable-tftp \
+ --tftp-root=/run/archiso/bootmnt \
+ --dhcp-range=192.168.0.2,192.168.0.254,86400 \
+ --dhcp-boot=/arch/boot/syslinux/gpxelinux.0 \
+ --dhcp-option-force=209,boot/syslinux/archiso.cfg \
+ --dhcp-option-force=210,/arch/
+
+* DHCP + HTTP
+
+Note: Not all NIC firmware supports HTTP and DNS (if domain name is used).
+ At least this works with iPXE and gPXE.
+
+# dnsmasq --port=0 \
+ --dhcp-range=192.168.0.2,192.168.0.254,86400 \
+ --dhcp-boot=http://192.168.0.7/arch/boot/syslinux/gpxelinux.0 \
+ --dhcp-option-force=209,boot/syslinux/archiso.cfg \
+ --dhcp-option-force=210,http://192.168.0.7/arch/
+
+
+Once the kernel is started from PXE, SquashFS files and other misc files
+inside "arch" directory must be loaded (second stage). One of the following
+methods can be used to serve the rest of live-medium.
+
+* HTTP
+
+# darkhttpd /run/archiso/bootmnt
+
+
+* NFS
+
+# echo "/run/archiso/bootmnt 192.168.0.*(ro,no_subtree_check,no_root_squash)" >> /etc/exports
+# rc.d start rpcbind nfs-common nfs-server
+
+
+* NBD
+
+Note: Adjust ARCH_201207 as needed.
+
+# cat << EOF > /tmp/nbd-server.conf
+[generic]
+[archiso]
+ readonly = true
+ exportname = /dev/disk/by-label/ARCH_201207
+EOF
+# nbd-server -C /tmp/nbd-server.conf