Remove mkinitcpio-archiso files

archiso/initcpio/*:
Remove mkinitcpio-archiso scripts as they have been split out into a separate project.

docs/README.{altbootmethods,bootparams}:
Remove mkinitcpio-archiso specific documentation.

2 files changed, 0 insertions, 260 deletions

diff --git a/docs/README.altbootmethods b/docs/README.altbootmethods
deleted file mode 100644
index 544e49b..0000000
--- a/docs/README.altbootmethods
+++ /dev/null
@@ -1,111 +0,0 @@
-INDEX
------
-
-* Alternative boot methods (configs/releng)
-  * ISO in loopback mode
-  * ISO in memdisk mode
-  * Network booting (PXE) [first stage]
-    * DHCP + TFTP
-    * DHCP + HTTP
-    * HTTP/NFS/NBD [second stage]
-
-
-
-*** Alternative boot methods (configs/releng)
-
-ISO images names consist of: archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-
-Where:
-    <YYYY> Year
-    <MM> Month
-    <DD> Day
-
-
-** ISO in loopback mode.
-
-Note: Described method is for using with GRUB2.
-      GRUB2 is installed on target media and archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-      is at path <TARGET-PATH> on disk <D> and partition <P>,
-      where filesystem is labeled as <TARGET-FS-LABEL>.
-
-menuentry "Arch Linux (x86_64)" {
-    set isofile="/<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-x86_64.iso"
-    loopback loop (hd<D>,<P>)$isofile
-    linux (loop)/arch/boot/x86_64/vmlinuz img_label=<TARGET-FS-LABEL> img_loop=$isofile
-    initrd (loop)/arch/boot/x86_64/archiso.img
-}
-
-
-** ISO in memdisk mode.
-
-Note: Described method is for using with SYSLINUX. Anyway MEMDISK from SYSLINUX can work
-      with other bootloaders.
-      SYSLINUX is installed on target media and archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-      is at path <TARGET-PATH>.
-
-
-LABEL arch_x64
-   LINUX memdisk
-   INITRD /<TARGET-PATH>/archlinux-<YYYY>.<MM>.<DD>-x86_64.iso
-   APPEND iso
-
-
-** Network booting (PXE).
-
-All ISOs are ready to act as PXE server, some manual steps are needed
-to setup the desired PXE boot mode.
-Alternatively it is possible to use an existing PXE server following the same logic.
-Note: Setup network first, adjust IP adresses, and respect all slashes "/".
-
-First stage is for loading kernel and initramfs via PXE, two methods described here:
-
-* DHCP + TFTP
-
-Note: All NIC firmwares should support this.
-
-# dnsmasq --port=0 \
-          --enable-tftp \
-          --tftp-root=/run/archiso/bootmnt \
-          --dhcp-range=192.168.0.2,192.168.0.254,86400 \
-          --dhcp-boot=/arch/boot/syslinux/lpxelinux.0 \
-          --dhcp-option-force=209,boot/syslinux/archiso.cfg \
-          --dhcp-option-force=210,/arch/
-
-* DHCP + HTTP
-
-Note: Not all NIC firmware supports HTTP and DNS (if domain name is used).
-      At least this works with iPXE and gPXE.
-
-# dnsmasq --port=0 \
-          --dhcp-range=192.168.0.2,192.168.0.254,86400 \
-          --dhcp-boot=http://192.168.0.7/arch/boot/syslinux/lpxelinux.0 \
-          --dhcp-option-force=209,boot/syslinux/archiso.cfg \
-          --dhcp-option-force=210,http://192.168.0.7/arch/
-
-
-Once the kernel is started from PXE, SquashFS files and other misc files
-inside "arch" directory must be loaded (second stage). One of the following
-methods can be used to serve the rest of live-medium.
-
-* HTTP
-
-# darkhttpd /run/archiso/bootmnt
-
-
-* NFS
-
-# echo "/run/archiso/bootmnt 192.168.0.*(ro,no_subtree_check,no_root_squash)" >> /etc/exports
-# systemctl start nfs-server.service
-
-
-* NBD
-
-Note: Adjust ARCH_201703 as needed.
-
-# cat << EOF > /tmp/nbd-server.conf
-[generic]
-[archiso]
-    readonly = true
-    exportname = /dev/disk/by-label/ARCH_201703
-EOF
-# nbd-server -C /tmp/nbd-server.conf
diff --git a/docs/README.bootparams b/docs/README.bootparams
deleted file mode 100644
index 60d9ccb..0000000
--- a/docs/README.bootparams
+++ /dev/null
@@ -1,149 +0,0 @@
-INDEX
------
-
-* Boot parameters (initramfs stage)
-  * hooks/archiso
-  * hooks/archiso_pxe_common
-  * hooks/archiso_pxe_nbd
-  * hooks/archiso_pxe_http
-  * hooks/archiso_pxe_nfs
-  * hooks/archiso_loop_mnt
-
-* Boot parameters (configs/releng)
-  * scripts/choose-mirror
-
-
-*** Boot parameters (initramfs stage)
-
-** hooks/archiso
-
-* archisolabel=     Set the filesystem label where archiso files reside.
-                    Default: (unset)
-* archisodevice=    Set the device node where archiso medium is located.
-                    Default: "/dev/disk/by-label/${archisolabel}"
-* archisobasedir=   Set the base directory where all files reside.
-                    Default: "arch"
-* copytoram=        If set to "y" or just "copytoram" without arguments,
-                    all SquashFS are copied to "RAM". If you add the package
-                    "pv" to the packages.x86_64 it is used to display the copy
-                    progress.
-                    Default: (unset)
-* checksum=         If set to "y" or just "checksum" without arguments,
-                    performs a self-test of all files inside ${install_dir},
-                    and continue booting if ok.
-                    Default: (unset)
-* cow_label=        Set the filesystem label where COW file (for dm-snapshot)
-                    or upperdir/workdir files (for overlayfs) must be stored.
-                    Default: (unset)
-* cow_device=       Like cow_label= but using device node.
-                    Default: (unset) or "/dev/disk/by-label/${cow_label}"
-* cow_flags=        Set extra mount options, e.g. for btrfs subvolumes.
-                    Default: defaults
-* cow_directory=    Set a directory inside ${cow_device}.
-                    Default: "/persistent_${archisolabel}/${arch}"
-* cow_persistent=   Set if snapshot is persistent "P" or non-persistent "N".
-                    Only used for dm-snapshot mode, ignored for overlayfs.
-                    Default: "N" (if no ${cow_device} is used) otherwise "P".
-* cow_spacesize=    Set the size for COW space (tmpfs). Valid for both
-                    dm-snapshot and overlayfs mode.
-                    The argument is an integer and optional unit.
-                    Units are M,G (powers of 1024).
-                    Default: "256M"
-* cow_chunksize=    Set chunksize used for dm-snapshot. This is number
-                    of 512 byte blocks to write at once.
-                    Default: "8"
-* copytoram_size=   Set the size of tmpfs. This space is used for
-                    airootfs.sfs image if copytoram=y.
-                    Size is in bytes (suffix with "k", "m" and "g") or
-                    in percentage of available RAM.
-                    Default: "75%"
-* dm_snap_prefix=   Set a prefix for dm-snapshot node names.
-                    Only used for dm-snapshot mode, ignored for overlayfs.
-                    Default: "arch"
-* arch=             Force an architecture type (i686 | x86_64).
-                    Do not set it for normal operations.
-                    Default: (architecture of running kernel)
-
-
-** hooks/archiso_pxe_common
-
-* ip=               This parameter is setup automatically by PXELINUX
-                    when option "SYSAPPEND" is set to 1 or 2 in config.
-                    ip=<client-ip>:<boot-server-ip>:<gw-ip>:<netmask>
-                    Default: (set via PXE server)
-* BOOTIF=           This parameter is setup automatically by PXELINUX
-                    when option "SYSAPPEND" is set to 2 or 3 in config.
-                    BOOTIF=<hardware-address-of-boot-interface>
-                    Default: (set via PXELINUX)
-* copy_resolvconf=  Copy /etc/resolv.conf from initramfs to live-enviroment.
-                    Set to "n" to skip them.
-                    Default: "y"
-
-
-** hooks/archiso_pxe_nbd
-
-* archiso_nbd_name= Set NBD export name used by the server.
-                    Default: archiso
-* archiso_nbd_srv=  Set an IP address where NBD reside.
-                    If ${pxeserver} is used, PXE IP will be used.
-                    Default: (unset)
-
-
-** hooks/archiso_pxe_http
-
-* archiso_http_srv= Set an HTTP URL (must end with /) where ${archisobasedir}
-                    is found with all *.sfs files.
-                    In the IP/domain part if ${pxeserver} is used, use PXE IP.
-                    Default: (unset)
-* archiso_http_spc= Set the size of tmpfs where *.sfs files are downloaded.
-                    Default: "75%"
-
-
-** hooks/archiso_pxe_nfs
-
-* archiso_nfs_srv=  Set the NFS-IP:/path of the server
-                    In the IP part if ${pxeserver} is used, PXE IP will be used.
-                    Default: (unset)
-* archiso_nfs_opt=  Set NFS mount options separated by comma.
-                    Default: (unset, see below)
-                    These are the implicit options:
-                      port            = as given by server portmap daemon
-                      rsize           = 1024
-                      wsize           = 1024
-                      timeo           = 7
-                      retrans         = 3
-                      acregmin        = 3
-                      acregmax        = 60
-                      acdirmin        = 30
-                      acdirmax        = 60
-                      flags           = hard, nointr, noposix, cto, ac
-
-
-** hooks/archiso_loop_mnt
-
-* img_label=        Set the filesystem label where archiso-image.iso.
-                    Default: (unset)
-* img_dev=          Device where archiso-image.iso reside.
-                    Default: (unset) or "/dev/disk/by-label/${img_label}"
-* img_flags=        Set extra mount options, e.g. for btrfs subvolumes.
-                    Default: defaults
-* img_loop=         Full path where archiso-image.iso is located on ${img_dev}
-                    Default: (unset)
-
-
-
-*** Boot parameters (configs/releng)
-
-** scripts/choose-mirror
-
-* mirror=           Takes a mirror URL and creates a new mirrorlist.
-                    When setting mirror=auto, the mirror is taken from
-                    archiso_http_srv= in order to keep using the mirror
-                    selected in the netboot menu.
-                    Default: (unset)
-
-* script=           Takes a local file path or a URL to a script file which is
-                    executed from a temporary location after boot. If the
-                    parameter points at a remote file (supported protocols are
-                    http, https and ftp), it will be downloaded before execution.
-                    Default: (unset)