merged with upstream

9 files changed, 16 insertions, 185 deletions

diff --git a/configs/baseline/airootfs/etc/localtime b/configs/baseline/airootfs/etc/localtime
new file mode 120000
index 0000000..0e35b57
--- /dev/null
+++ b/configs/baseline/airootfs/etc/localtime
@@ -0,0 +1 @@
+/usr/share/zoneinfo/UTC
\ No newline at end of file
diff --git a/configs/baseline/airootfs/etc/mkinitcpio.conf b/configs/baseline/airootfs/etc/mkinitcpio.conf
deleted file mode 100644
index 34b1a06..0000000
--- a/configs/baseline/airootfs/etc/mkinitcpio.conf
+++ /dev/null
@@ -1,67 +0,0 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run.  Advanced users may wish to specify all system modules
-# in this array.  For instance:
-#     MODULES=(piix ide_disk reiserfs)
-MODULES=()
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image.  This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way.  This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file.  The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-##   This setup specifies all modules in the MODULES setting above.
-##   No raid, lvm2, or encrypted root is needed.
-#    HOOKS=(base)
-#
-##   This setup will autodetect all modules for your system and should
-##   work as a sane default
-#    HOOKS=(base udev autodetect block filesystems)
-#
-##   This setup will generate a 'full' image which supports most systems.
-##   No autodetection is done.
-#    HOOKS=(base udev block filesystems)
-#
-##   This setup assembles a pata mdadm array with an encrypted root FS.
-##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-#    HOOKS=(base udev block mdadm encrypt filesystems)
-#
-##   This setup loads an lvm2 volume group on a usb device.
-#    HOOKS=(base udev block lvm2 filesystems)
-#
-##   NOTE: If you have /usr on a separate partition, you MUST include the
-#    usr, fsck and shutdown hooks.
-HOOKS=(base udev modconf archiso block filesystems)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
-#COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-#COMPRESSION="zstd"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()
diff --git a/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf b/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf
new file mode 100644
index 0000000..fd9cd48
--- /dev/null
+++ b/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf
@@ -0,0 +1 @@
+HOOKS=(base udev modconf archiso block filesystems)
diff --git a/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset b/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset
index 9f67184..8e85205 100644
--- a/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset
+++ b/configs/baseline/airootfs/etc/mkinitcpio.d/linux.preset
@@ -3,6 +3,6 @@
 PRESETS=('archiso')
 
 ALL_kver='/boot/vmlinuz-linux'
-ALL_config='/etc/mkinitcpio.conf'
+archiso_config='/etc/mkinitcpio.conf.d/archiso.conf'
 
 archiso_image="/boot/initramfs-linux.img"
diff --git a/configs/baseline/airootfs/etc/ssh/sshd_config b/configs/baseline/airootfs/etc/ssh/sshd_config
deleted file mode 100644
index dc22c11..0000000
--- a/configs/baseline/airootfs/etc/ssh/sshd_config
+++ /dev/null
@@ -1,116 +0,0 @@
-#	$OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
-
-# This is the sshd server system-wide configuration file.  See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options override the
-# default value.
-
-#Port 22
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_ecdsa_key
-#HostKey /etc/ssh/ssh_host_ed25519_key
-
-# Ciphers and keying
-#RekeyLimit default none
-
-# Logging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-PermitRootLogin yes
-#StrictModes yes
-#MaxAuthTries 6
-#MaxSessions 10
-
-#PubkeyAuthentication yes
-
-# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
-# but this is overridden so installations will only check .ssh/authorized_keys
-AuthorizedKeysFile	.ssh/authorized_keys
-
-#AuthorizedPrincipalsFile none
-
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandUser nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-KbdInteractiveAuthentication no
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the KbdInteractiveAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via KbdInteractiveAuthentication may bypass
-# the setting of "PermitRootLogin prohibit-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and KbdInteractiveAuthentication to 'no'.
-UsePAM yes
-
-#AllowAgentForwarding yes
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PermitTTY yes
-PrintMotd no
-#PrintLastLog yes
-#TCPKeepAlive yes
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS no
-#PidFile /run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-#VersionAddendum none
-
-# no default banner path
-#Banner none
-
-# override default of no subsystems
-Subsystem	sftp	/usr/lib/ssh/sftp-server
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-#	X11Forwarding no
-#	AllowTcpForwarding no
-#	PermitTTY no
-#	ForceCommand cvs server
diff --git a/configs/baseline/airootfs/etc/ssh/sshd_config.d/10-archiso.conf b/configs/baseline/airootfs/etc/ssh/sshd_config.d/10-archiso.conf
new file mode 100644
index 0000000..6ea7b41
--- /dev/null
+++ b/configs/baseline/airootfs/etc/ssh/sshd_config.d/10-archiso.conf
@@ -0,0 +1,3 @@
+# Allow root login using password authentication
+PasswordAuthentication yes
+PermitRootLogin yes
diff --git a/configs/baseline/airootfs/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf b/configs/baseline/airootfs/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf
new file mode 100644
index 0000000..0e9ceb4
--- /dev/null
+++ b/configs/baseline/airootfs/etc/systemd/network.conf.d/ipv6-privacy-extensions.conf
@@ -0,0 +1,2 @@
+[Network]
+IPv6PrivacyExtensions=yes
diff --git a/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network b/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network
index 4b6a2ab..0e4287b 100644
--- a/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network
+++ b/configs/baseline/airootfs/etc/systemd/network/20-ethernet.network
@@ -5,6 +5,9 @@
 Name=en*
 Name=eth*
 
+[Link]
+RequiredForOnline=routable
+
 [Network]
 DHCP=yes
-IPv6PrivacyExtensions=yes
+MulticastDNS=yes
diff --git a/configs/baseline/airootfs/etc/systemd/resolved.conf.d/archiso.conf b/configs/baseline/airootfs/etc/systemd/resolved.conf.d/archiso.conf
new file mode 100644
index 0000000..636f3bd
--- /dev/null
+++ b/configs/baseline/airootfs/etc/systemd/resolved.conf.d/archiso.conf
@@ -0,0 +1,4 @@
+# Default systemd-resolved configuration for archiso
+
+[Resolve]
+MulticastDNS=yes