path: root/archinstall/locales/zh-CN/LC_MESSAGES/base.po

msgid ""
msgstr ""
"Project-Id-Version: \n"
"POT-Creation-Date: \n"
"PO-Revision-Date: \n"
"Last-Translator: clsty <celestial.y@outlook.com>\n"
"Language-Team: \n"
"Language: zh_CN\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Poedit 3.3.2\n"

msgid "[!] A log file has been created here: {} {}"
msgstr "[!] 一份日志文件已在此处创建：{} {}"

msgid "    Please submit this issue (and file) to https://github.com/archlinux/archinstall/issues"
msgstr "    请将此问题（和文件）提交到 https://github.com/archlinux/archinstall/issues"

msgid "Do you really want to abort?"
msgstr "您真的要中止吗？"

msgid "And one more time for verification: "
msgstr "再输入一次以进行验证："

msgid "Would you like to use swap on zram?"
msgstr "您想在 zram 上使用交换分区（swap）吗？"

msgid "Desired hostname for the installation: "
msgstr "请输入安装后期望使用的主机名（hostname）："

msgid "Username for required superuser with sudo privileges: "
msgstr "请输入需要超级用户的用户名（sudo 权限）："

msgid "Any additional users to install (leave blank for no users): "
msgstr "请输入要安装的其他用户（留空表示不安装其他用户）："

msgid "Should this user be a superuser (sudoer)?"
msgstr "这个用户应该成为超级用户（sudoer）吗？"

msgid "Select a timezone"
msgstr "选择时区"

msgid "Would you like to use GRUB as a bootloader instead of systemd-boot?"
msgstr "您想使用 GRUB 作为引导加载程序而不是 systemd-boot 吗？"

msgid "Choose a bootloader"
msgstr "选择引导加载程序"

msgid "Choose an audio server"
msgstr "请选择一个音频服务器（audio server）"

msgid "Only packages such as base, base-devel, linux, linux-firmware, efibootmgr and optional profile packages are installed."
msgstr "仅安装基本软件包（base）、基本开发软件包（base-devel）、Linux 内核（linux）、Linux 固件（linux-firmware）、efibootmgr 和可选的配置文件软件包（profile packages）。"

msgid "If you desire a web browser, such as firefox or chromium, you may specify it in the following prompt."
msgstr "如果您需要一个网络浏览器，例如 firefox 或 chromium，您可以在下面的提示中指定它。"

msgid "Write additional packages to install (space separated, leave blank to skip): "
msgstr "输入要安装的其他软件包（空格分隔，留空以跳过）："

msgid "Copy ISO network configuration to installation"
msgstr "将 ISO 中的网络配置复制到安装目标中"

msgid "Use NetworkManager (necessary for configuring internet graphically in GNOME and KDE)"
msgstr "使用 NetworkManager（在 GNOME 和 KDE 中以图形方式配置 Internet 所必需的）"

msgid "Select one network interface to configure"
msgstr "选择要配置的网络接口"

msgid "Select which mode to configure for \"{}\" or skip to use default mode \"{}\""
msgstr "选择要为“{}”配置的模式或跳过以使用默认模式“{}”"

msgid "Enter the IP and subnet for {} (example: 192.168.0.5/24): "
msgstr "输入 {} 的 IP 和子网（例如：192.168.0.5/24）："

msgid "Enter your gateway (router) IP address or leave blank for none: "
msgstr "请输入您的网关（路由器）IP 地址，如果没有请留空："

msgid "Enter your DNS servers (space separated, blank for none): "
msgstr "请输入您的 DNS 服务器地址（以空格分隔，如果没有请留空）："

msgid "Select which filesystem your main partition should use"
msgstr "选择您的主分区应使用的文件系统"

msgid "Current partition layout"
msgstr "当前的分区布局"

msgid ""
"Select what to do with\n"
"{}"
msgstr ""
"选择要执行的操作\n"
"{}"

msgid "Enter a desired filesystem type for the partition"
msgstr "为分区输入所需的文件系统类型"

msgid "Enter the start location (in parted units: s, GB, %, etc. ; default: {}): "
msgstr "输入起始位置（单位：s，GB，% 等；默认值：{}）："

msgid "Enter the end location (in parted units: s, GB, %, etc. ; ex: {}): "
msgstr "输入结束位置（单位：s，GB，% 等；例如：{}）："

msgid "{} contains queued partitions, this will remove those, are you sure?"
msgstr "{} 包含了已排队的分区，这将会删除这些分区，您确定吗？"

msgid ""
"{}\n"
"\n"
"Select by index which partitions to delete"
msgstr ""
"{}\n"
"\n"
"按索引选择要删除的分区"

msgid ""
"{}\n"
"\n"
"Select by index which partition to mount where"
msgstr ""
"{}\n"
"\n"
"按索引选择要挂载的分区及挂载位置"

msgid " * Partition mount-points are relative to inside the installation, the boot would be /boot as an example."
msgstr " * 分区挂载点是相对于安装目标的目录内部的，例如引导分区（boot）的挂载点为 /boot。"

msgid "Select where to mount partition (leave blank to remove mountpoint): "
msgstr "选择要挂载分区的位置（留空表示移除挂载点）："

msgid ""
"{}\n"
"\n"
"Select which partition to mask for formatting"
msgstr ""
"{}\n"
"\n"
"选择要格式化的分区"

msgid ""
"{}\n"
"\n"
"Select which partition to mark as encrypted"
msgstr ""
"{}\n"
"\n"
"选择要加密的分区"

msgid ""
"{}\n"
"\n"
"Select which partition to mark as bootable"
msgstr ""
"{}\n"
"\n"
"选择要标记为可引导的分区"

msgid ""
"{}\n"
"\n"
"Select which partition to set a filesystem on"
msgstr ""
"{}\n"
"\n"
"选择要设置文件系统的分区"

msgid "Enter a desired filesystem type for the partition: "
msgstr "为分区选择所需的文件系统类型："

msgid "Archinstall language"
msgstr "Archinstall 语言"

msgid "Wipe all selected drives and use a best-effort default partition layout"
msgstr "擦除所有选定的驱动器并使用最佳的默认分区布局"

msgid "Select what to do with each individual drive (followed by partition usage)"
msgstr "选择对每个单独的驱动器执行的操作（后跟分区使用情况）"

msgid "Select what you wish to do with the selected block devices"
msgstr "选择要对所选的（一个或多个）块设备（block device）执行的操作"

msgid "This is a list of pre-programmed profiles, they might make it easier to install things like desktop environments"
msgstr "这份列表列出了预先编写的配置文件，它们可能会使安装桌面环境等内容变得更加容易"

msgid "Select keyboard layout"
msgstr "选择键盘布局"

msgid "Select one of the regions to download packages from"
msgstr "选择一个要从中下载软件包的区域"

msgid "Select one or more hard drives to use and configure"
msgstr "选择要使用和配置的硬盘驱动器（可多选）"

msgid "For the best compatibility with your AMD hardware, you may want to use either the all open-source or AMD / ATI options."
msgstr "为了与您的 AMD 硬件实现最佳兼容性，您可能需要使用所有开源显卡驱动程序或 AMD / ATI 选项。"

msgid "For the best compatibility with your Intel hardware, you may want to use either the all open-source or Intel options.\n"
msgstr "为了与您的 Intel 硬件实现最佳兼容性，您可能需要使用所有开源显卡驱动程序或 Intel 选项。\n"

msgid "For the best compatibility with your Nvidia hardware, you may want to use the Nvidia proprietary driver.\n"
msgstr "为了与您的 Nvidia 硬件实现最佳兼容性，您可能需要使用 Nvidia 专有驱动程序。\n"

msgid ""
"\n"
"\n"
"Select a graphics driver or leave blank to install all open-source drivers"
msgstr ""
"\n"
"\n"
"选择一个显卡驱动程序，或留空以安装所有开源驱动程序"

msgid "All open-source (default)"
msgstr "所有开源显卡驱动程序（默认）"

msgid "Choose which kernels to use or leave blank for default \"{}\""
msgstr "选择要使用的内核或留空以使用默认值“{}”"

msgid "Choose which locale language to use"
msgstr "选择要使用的语言环境"

msgid "Choose which locale encoding to use"
msgstr "选择要使用的语言环境编码"

msgid "Select one of the values shown below: "
msgstr "选择以下值之一："

msgid "Select one or more of the options below: "
msgstr "选择以下选项之一或多个选项："

msgid "Adding partition...."
msgstr "正在添加分区……"

msgid "You need to enter a valid fs-type in order to continue. See `man parted` for valid fs-type's."
msgstr "您需要输入有效的文件系统类型才能继续。请参阅 `man parted` 以获取有效的文件系统类型。"

msgid "Error: Listing profiles on URL \"{}\" resulted in:"
msgstr "错误：列出位于 URL “{}” 上的配置文件时出错："

msgid "Error: Could not decode \"{}\" result as JSON:"
msgstr "错误：无法将“{}”结果解码为 JSON："

msgid "Keyboard layout"
msgstr "键盘布局"

msgid "Mirror region"
msgstr "镜像区域"

msgid "Locale language"
msgstr "语言环境"

msgid "Locale encoding"
msgstr "语言环境编码"

msgid "Drive(s)"
msgstr "驱动器"

msgid "Disk layout"
msgstr "磁盘布局"

msgid "Encryption password"
msgstr "加密密码"

msgid "Swap"
msgstr "交换分区"

msgid "Bootloader"
msgstr "引导加载程序"

msgid "Root password"
msgstr "Root 密码"

msgid "Superuser account"
msgstr "超级用户帐户"

msgid "User account"
msgstr "用户帐户"

msgid "Profile"
msgstr "配置文件"

msgid "Audio"
msgstr "音频"

msgid "Kernels"
msgstr "内核"

msgid "Additional packages"
msgstr "附加软件包"

msgid "Network configuration"
msgstr "网络配置"

msgid "Automatic time sync (NTP)"
msgstr "自动时间同步（NTP）"

msgid "Install ({} config(s) missing)"
msgstr "安装（{} 个配置缺失）"

msgid ""
"You decided to skip harddrive selection\n"
"and will use whatever drive-setup is mounted at {} (experimental)\n"
"WARNING: Archinstall won't check the suitability of this setup\n"
"Do you wish to continue?"
msgstr ""
"您决定跳过硬盘驱动器选择\n"
"并将使用挂载在 {} 上的任何驱动器设置（实验性）\n"
"警告：Archinstall 将不会检查此设置的适用性\n"
"您是否要继续？"

msgid "Re-using partition instance: {}"
msgstr "正在重新使用分区实例：{}"

msgid "Create a new partition"
msgstr "创建一个新分区"

msgid "Delete a partition"
msgstr "删除一个分区"

msgid "Clear/Delete all partitions"
msgstr "清除/删除所有分区"

msgid "Assign mount-point for a partition"
msgstr "为分区分配挂载点"

msgid "Mark/Unmark a partition to be formatted (wipes data)"
msgstr "将分区标记/取消标记为格式化（擦除数据）"

msgid "Mark/Unmark a partition as encrypted"
msgstr "将分区标记/取消标记为加密"

msgid "Mark/Unmark a partition as bootable (automatic for /boot)"
msgstr "将分区标记/取消标记为可引导（/boot 会自动设置为可引导）"

msgid "Set desired filesystem for a partition"
msgstr "为分区设置所需的文件系统"

msgid "Abort"
msgstr "中止"

msgid "Hostname"
msgstr "主机名"

msgid "Not configured, unavailable unless setup manually"
msgstr "未配置；除非手动设置，否则不可用"

msgid "Timezone"
msgstr "时区"

msgid "Set/Modify the below options"
msgstr "设置/修改以下选项"

msgid "Install"
msgstr "安装"

msgid ""
"Use ESC to skip\n"
"\n"
msgstr ""
"按 ESC 跳过\n"
"\n"

msgid "Suggest partition layout"
msgstr "建议分区布局"

msgid "Enter a password: "
msgstr "输入密码："

msgid "Enter a encryption password for {}"
msgstr "为 {} 输入一个加密密码"

msgid "Enter disk encryption password (leave blank for no encryption): "
msgstr "输入磁盘加密密码（留空则不加密）："

msgid "Create a required super-user with sudo privileges: "
msgstr "创建所需的具有 sudo 权限的超级用户："

msgid "Enter root password (leave blank to disable root): "
msgstr "输入 root 密码（留空以禁用 root）："

msgid "Password for user \"{}\": "
msgstr "用户“{}”的密码："

msgid "Verifying that additional packages exist (this might take a few seconds)"
msgstr "正在验证附加软件包是否存在（这可能需要几秒或几十秒）"

msgid "Would you like to use automatic time synchronization (NTP) with the default time servers?\n"
msgstr "您是否希望使用默认时间服务器进行自动时间同步（NTP）？\n"

msgid ""
"Hardware time and other post-configuration steps might be required in order for NTP to work.\n"
"For more information, please check the Arch wiki"
msgstr ""
"为了使 NTP 正常工作，可能需要在之后进行硬件时间及其他配置的步骤。\n"
"更多信息，请查阅 Arch wiki"

msgid "Enter a username to create an additional user (leave blank to skip): "
msgstr "输入用户名以创建其他用户（留空以跳过）："

msgid "Use ESC to skip\n"
msgstr "按 ESC 跳过\n"

msgid ""
"\n"
" Choose an object from the list, and select one of the available actions for it to execute"
msgstr ""
"\n"
" 从列表中选取一个对象，并选择一个要执行的可选操作"

msgid "Cancel"
msgstr "取消"

msgid "Confirm and exit"
msgstr "确认并退出"

msgid "Add"
msgstr "添加"

msgid "Copy"
msgstr "复制"

msgid "Edit"
msgstr "编辑"

msgid "Delete"
msgstr "删除"

msgid "Select an action for '{}'"
msgstr "为“{}”选择一个操作"

msgid "Copy to new key:"
msgstr "复制到新密钥："

msgid "Unknown nic type: {}. Possible values are {}"
msgstr "未知的网卡类型：{}。可能的值为 {}"

msgid ""
"\n"
"This is your chosen configuration:"
msgstr ""
"\n"
"这是您选择的配置："

msgid "Pacman is already running, waiting maximum 10 minutes for it to terminate."
msgstr "Pacman 已经在运行，最多等待 10 分钟或直到它终止。"

msgid "Pre-existing pacman lock never exited. Please clean up any existing pacman sessions before using archinstall."
msgstr "预先存在的 pacman 锁从未退出。请在使用 archinstall 之前清理任何现有的 pacman 会话。"

msgid "Choose which optional additional repositories to enable"
msgstr "选择要启用的可选附加仓库"

msgid "Add a user"
msgstr "添加一个用户"

msgid "Change password"
msgstr "修改密码"

msgid "Promote/Demote user"
msgstr "提升/降级用户"

msgid "Delete User"
msgstr "删除用户"

msgid ""
"\n"
"Define a new user\n"
msgstr ""
"\n"
"定义一个新用户\n"

msgid "User Name : "
msgstr "用户名："

msgid "Should {} be a superuser (sudoer)?"
msgstr "是否将 {} 设置为超级用户（sudoer）？"

msgid "Define users with sudo privilege: "
msgstr "定义具有 sudo 权限的用户："

msgid "No network configuration"
msgstr "无网络配置"

msgid "Set desired subvolumes on a btrfs partition"
msgstr "在 btrfs 分区上设置所需的子卷"

msgid ""
"{}\n"
"\n"
"Select which partition to set subvolumes on"
msgstr ""
"{}\n"
"\n"
"选择要设置子卷的分区"

msgid "Manage btrfs subvolumes for current partition"
msgstr "管理当前分区的 btrfs 子卷"

msgid "No configuration"
msgstr "无配置"

msgid "Save user configuration"
msgstr "保存用户配置"

msgid "Save user credentials"
msgstr "保存用户凭据"

msgid "Save disk layout"
msgstr "保存磁盘布局"

msgid "Save all"
msgstr "全部保存"

msgid "Choose which configuration to save"
msgstr "选择要保存的配置"

msgid "Enter a directory for the configuration(s) to be saved: "
msgstr "输入要保存配置的目录："

msgid "Not a valid directory: {}"
msgstr "不是有效的目录：{}"

msgid "The password you are using seems to be weak,"
msgstr "您正在使用的密码似乎很弱，"

msgid "are you sure you want to use it?"
msgstr "您确定要使用它吗？"

msgid "Optional repositories"
msgstr "可选仓库"

msgid "Save configuration"
msgstr "保存配置"

msgid "Missing configurations:\n"
msgstr "缺少配置：\n"

msgid "Either root-password or at least 1 superuser must be specified"
msgstr "必须指定 root 密码或至少 1 个超级用户"

msgid "Manage superuser accounts: "
msgstr "管理超级用户账户："

msgid "Manage ordinary user accounts: "
msgstr "管理普通用户账户："

msgid " Subvolume :{:16}"
msgstr " 子卷：{:16}"

msgid " mounted at {:16}"
msgstr " 挂载在 {:16}"

msgid " with option {}"
msgstr " 与选项 {}"

msgid ""
"\n"
" Fill the desired values for a new subvolume \n"
msgstr ""
"\n"
" 为新子卷填写所需的值 \n"

msgid "Subvolume name "
msgstr "子卷名称 "

msgid "Subvolume mountpoint"
msgstr "子卷挂载点"

msgid "Subvolume options"
msgstr "子卷选项"

msgid "Save"
msgstr "保存"

msgid "Subvolume name :"
msgstr "子卷名称："

msgid "Select a mount point :"
msgstr "选择一个挂载点："

msgid "Select the desired subvolume options "
msgstr "选择所需的子卷选项 "

msgid "Define users with sudo privilege, by username: "
msgstr "通过用户名定义具有 sudo 权限的用户："

msgid "[!] A log file has been created here: {}"
msgstr "[!] 已在此处创建一份日志文件：{}"

msgid "Would you like to use BTRFS subvolumes with a default structure?"
msgstr "您想以默认结构使用 BTRFS 子卷吗？"

msgid "Would you like to use BTRFS compression?"
msgstr "您想使用 BTRFS 压缩吗？"

msgid "Would you like to create a separate partition for /home?"
msgstr "您想为 /home 创建一个单独的分区吗？"

msgid "The selected drives do not have the minimum capacity required for an automatic suggestion\n"
msgstr "所选驱动器不具有自动建议所需的最小容量\n"

msgid "Minimum capacity for /home partition: {}GB\n"
msgstr "/home 分区的最小容量：{}GB\n"

msgid "Minimum capacity for Arch Linux partition: {}GB"
msgstr "Arch Linux 分区的最小容量：{}GB"

msgid "Continue"
msgstr "继续"

msgid "yes"
msgstr "是"

msgid "no"
msgstr "否"

msgid "set: {}"
msgstr "设置：{}"

msgid "Manual configuration setting must be a list"
msgstr "手动配置的设置必须是一个列表"

msgid "No iface specified for manual configuration"
msgstr "没有为手动配置指定网卡接口"

msgid "Manual nic configuration with no auto DHCP requires an IP address"
msgstr "不具备自动 DHCP 的手动网卡配置需要一个 IP 地址"

msgid "Add interface"
msgstr "添加接口"

msgid "Edit interface"
msgstr "编辑接口"

msgid "Delete interface"
msgstr "删除接口"

msgid "Select interface to add"
msgstr "选择要添加的接口"

msgid "Manual configuration"
msgstr "手动配置"

msgid "Mark/Unmark a partition as compressed (btrfs only)"
msgstr "将分区标记/取消标记为压缩（仅限 btrfs）"

msgid "The password you are using seems to be weak, are you sure you want to use it?"
msgstr "您正在使用的密码似乎很弱，您确定要使用它吗？"

msgid "Provides a selection of desktop environments and tiling window managers, e.g. gnome, kde, sway"
msgstr "提供一系列桌面环境和平铺窗口管理器供选择，例如 gnome、kde、sway"

msgid "Select your desired desktop environment"
msgstr "选择您所需的桌面环境"

msgid "A very basic installation that allows you to customize Arch Linux as you see fit."
msgstr "一个非常基本的安装，允许您根据需要自定义 Arch Linux。"

msgid "Provides a selection of various server packages to install and enable, e.g. httpd, nginx, mariadb"
msgstr "提供一系列的多种服务器软件包以供安装启用，例如 httpd、nginx、mariadb"

msgid "Choose which servers to install, if none then a minimal installation will be done"
msgstr "选择要安装的服务器，若无则将执行最小化安装"

msgid "Installs a minimal system as well as xorg and graphics drivers."
msgstr "安装一个最小化系统以及 xorg 和显卡驱动程序。"

msgid "Press Enter to continue."
msgstr "按 Enter 继续。"

msgid "Would you like to chroot into the newly created installation and perform post-installation configuration?"
msgstr "您是否想要 chroot 到新创建的系统内以进行安装后的配置？"

msgid "Are you sure you want to reset this setting?"
msgstr "您确定要重置此设置吗？"

msgid "Select one or more hard drives to use and configure\n"
msgstr "选择要使用和配置的硬盘驱动器（可多选）\n"

msgid "Any modifications to the existing setting will reset the disk layout!"
msgstr "对现有设置的任何修改都将重置磁盘布局！"

msgid "If you reset the harddrive selection this will also reset the current disk layout. Are you sure?"
msgstr "如果重置硬盘驱动器选择，则当前磁盘布局也将重置。您确定吗？"

msgid "Save and exit"
msgstr "保存并退出"

msgid ""
"{}\n"
"contains queued partitions, this will remove those, are you sure?"
msgstr ""
"{}\n"
"包含排队的分区，这将删除这些分区，您确定吗？"

msgid "No audio server"
msgstr "没有音频服务器"

msgid "(default)"
msgstr "（默认）"

msgid "Use ESC to skip"
msgstr "按 ESC 跳过"

msgid ""
"Use CTRL+C to reset current selection\n"
"\n"
msgstr "使用 CTRL+C 可重置当前选项\n"

msgid "Copy to: "
msgstr "复制到："

msgid "Edit: "
msgstr "编辑："

msgid "Key: "
msgstr "密钥："

msgid "Edit {}: "
msgstr "编辑 {}："

msgid "Add: "
msgstr "添加："

msgid "Value: "
msgstr "值："

msgid "You can skip selecting a drive and partitioning and use whatever drive-setup is mounted at /mnt (experimental)"
msgstr "您可以跳过选择驱动器和分区，并使用任何挂载在 /mnt 上的驱动器设置（实验性）"

msgid "Select one of the disks or skip and use /mnt as default"
msgstr "选择一个磁盘或跳过并使用 /mnt 作为默认值"

msgid "Select which partitions to mark for formatting:"
msgstr "选择要标记为格式化的分区："

msgid "Use HSM to unlock encrypted drive"
msgstr "使用 HSM 解锁加密驱动器"

msgid "Device"
msgstr "设备"

msgid "Size"
msgstr "大小"

msgid "Free space"
msgstr "空闲空间"

msgid "Bus-type"
msgstr "总线类型"

msgid "Either root-password or at least 1 user with sudo privileges must be specified"
msgstr "必须指定 root 密码或至少 1 个具有 sudo 权限的用户"

msgid "Enter username (leave blank to skip): "
msgstr "输入用户名（留空跳过）："

msgid "The username you entered is invalid. Try again"
msgstr "您输入的用户名无效。请重试"

msgid "Should \"{}\" be a superuser (sudo)?"
msgstr "是否将“{}”设置为超级用户（sudo）？"

msgid "Select which partitions to encrypt"
msgstr "选择要加密的分区"

msgid "very weak"
msgstr "非常弱"

msgid "weak"
msgstr "弱"

msgid "moderate"
msgstr "一般"

msgid "strong"
msgstr "强"

msgid "Add subvolume"
msgstr "添加子卷"

msgid "Edit subvolume"
msgstr "编辑子卷"

msgid "Delete subvolume"
msgstr "删除子卷"

msgid "Configured {} interfaces"
msgstr "已配置 {} 个接口"

msgid "This option enables the number of parallel downloads that can occur during installation"
msgstr "此选项启用安装期间可以发生的并行下载数"

msgid ""
"Enter the number of parallel downloads to be enabled.\n"
" (Enter a value between 1 to {})\n"
"Note:"
msgstr ""
"输入要启用的并行下载数。\n"
"  （输入一个介于 1 到 {} 之间的值）\n"
"提示："

msgid " - Maximum value   : {} ( Allows {} parallel downloads, allows {} downloads at a time )"
msgstr " - 最大值：{}（允许 {} 个并行下载，即同时允许 {} 个下载）"

msgid " - Minimum value   : 1 ( Allows 1 parallel download, allows 2 downloads at a time )"
msgstr " - 最小值：1（允许 1 个并行下载，同时允许 2 个下载）"

msgid " - Disable/Default : 0 ( Disables parallel downloading, allows only 1 download at a time )"
msgstr " - 禁用/默认值：0（禁用并行下载，同时只允许 1 个下载）"

#, python-brace-format
msgid "Invalid input! Try again with a valid input [1 to {max_downloads}, or 0 to disable]"
msgstr "输入无效！请重试一个有效输入 [1 到 {max_downloads}，或 0 以禁用]"

msgid "Parallel Downloads"
msgstr "并行下载"

msgid "ESC to skip"
msgstr "按 ESC 跳过"

msgid "CTRL+C to reset"
msgstr "按 CTRL+C 重置"

msgid "TAB to select"
msgstr "按 TAB 选择"

msgid "[Default value: 0] > "
msgstr "[默认值：0] > "

msgid "To be able to use this translation, please install a font manually that supports the language."
msgstr "要使用此翻译，请手动安装支持该语言的字体。"

msgid "The font should be stored as {}"
msgstr "字体应存储为 {}"

msgid "Archinstall requires root privileges to run. See --help for more."
msgstr "Archinstall 需要 root 权限才能运行。有关更多信息，请参阅 --help。"

msgid "Select an execution mode"
msgstr "选择执行模式"

msgid "Unable to fetch profile from specified url: {}"
msgstr "无法从指定的 URL 获取配置文件：{}"

msgid "Profiles must have unique name, but profile definitions with duplicate name found: {}"
msgstr "配置文件必须具有唯一的名称，但找到了具有重复名称的配置文件定义：{}"

msgid "Select one or more devices to use and configure"
msgstr "选择要使用并配置的设备（可多选）"

msgid "If you reset the device selection this will also reset the current disk layout. Are you sure?"
msgstr "如果重置设备选择，则当前磁盘布局也将重置。您确定吗？"

msgid "Existing Partitions"
msgstr "现有分区"

msgid "Select a partitioning option"
msgstr "选择分区选项"

msgid "Enter the root directory of the mounted devices: "
msgstr "输入已挂载设备的根目录："

msgid "Minimum capacity for /home partition: {}GiB\n"
msgstr "/home 分区的最小容量为：{}GB\n"

msgid "Minimum capacity for Arch Linux partition: {}GiB"
msgstr "Arch Linux 分区的最小容量为：{}GB"

msgid "This is a list of pre-programmed profiles_bck, they might make it easier to install things like desktop environments"
msgstr "这是预先编写的配置文件列表，它们可能会使安装桌面环境等内容更容易"

msgid "Current profile selection"
msgstr "当前配置文件选择"

msgid "Remove all newly added partitions"
msgstr "删除所有新添加的分区"

msgid "Assign mountpoint"
msgstr "分配挂载点"

msgid "Mark/Unmark to be formatted (wipes data)"
msgstr "将分区标记/取消标记为格式化（擦除数据）"

msgid "Mark/Unmark as bootable"
msgstr "将分区标记/取消标记为可引导"

msgid "Change filesystem"
msgstr "更改文件系统"

msgid "Mark/Unmark as compressed"
msgstr "标记/取消标记为压缩"

msgid "Set subvolumes"
msgstr "设置子卷"

msgid "Delete partition"
msgstr "删除分区"

msgid "Partition"
msgstr "分区"

msgid "This partition is currently encrypted, to format it a filesystem has to be specified"
msgstr "此分区当前已加密，要格式化它必须指定文件系统"

msgid "Partition mount-points are relative to inside the installation, the boot would be /boot as an example."
msgstr "分区挂载点是相对于安装目标的目录内部的，例如引导分区（boot）的挂载点为 /boot。"

msgid "If mountpoint /boot is set, then the partition will also be marked as bootable."
msgstr "如果设置了挂载点 /boot，则该分区也将被标记为可引导。"

msgid "Mountpoint: "
msgstr "挂载点："

msgid "Current free sectors on device {}:"
msgstr "设备 {} 上当前可用的扇区："

msgid "Total sectors: {}"
msgstr "总扇区数：{}"

msgid "Enter the start sector (default: {}): "
msgstr "输入起始扇区（百分比或块号，默认：{}）： "

msgid "Enter the end sector of the partition (percentage or block number, default: {}): "
msgstr "输入分区的结束扇区（百分比或块号，默认：{}）："

msgid "This will remove all newly added partitions, continue?"
msgstr "这将删除所有新添加的分区，是否继续？"

msgid "Partition management: {}"
msgstr "分区管理：{}"

msgid "Total length: {}"
msgstr "总长度：{}"

msgid "Encryption type"
msgstr "加密类型"

msgid "Partitions"
msgstr "分区"

msgid "No HSM devices available"
msgstr "没有可用的 HSM 设备"

msgid "Partitions to be encrypted"
msgstr "要加密的分区"

msgid "Select disk encryption option"
msgstr "选择磁盘加密选项"

msgid "Select a FIDO2 device to use for HSM"
msgstr "选择要用于 HSM 的 FIDO2 设备"

msgid "Use a best-effort default partition layout"
msgstr "使用最佳的默认分区布局"

msgid "Manual Partitioning"
msgstr "手动分区"

msgid "Pre-mounted configuration"
msgstr "预挂载配置"

msgid "Unknown"
msgstr "未知"

msgid "Partition encryption"
msgstr "分区加密"

msgid " ! Formatting {} in "
msgstr " ! 正在格式化 {} 为 "

msgid "← Back"
msgstr "← 返回"

msgid "Disk encryption"
msgstr "磁盘加密"

msgid "Configuration"
msgstr "配置"

msgid "Password"
msgstr "密码"

msgid "All settings will be reset, are you sure?"
msgstr "所有设置将被重置，您确定吗？"

msgid "Back"
msgstr "返回"

msgid "Please chose which greeter to install for the chosen profiles: {}"
msgstr "请选择要为所选配置文件安装的登录管理器：{}"

msgid "Environment type: {}"
msgstr "环境类型：{}"

msgid "The proprietary Nvidia driver is not supported by Sway. It is likely that you will run into issues, are you okay with that?"
msgstr "Sway 不支持 Nvidia 的专有驱动。您可能会遇到问题，您确定要继续吗？"

msgid "Installed packages"
msgstr "已安装的软件包"

msgid "Add profile"
msgstr "添加配置文件"

msgid "Edit profile"
msgstr "编辑配置文件"

msgid "Delete profile"
msgstr "删除配置文件"

msgid "Profile name: "
msgstr "配置文件名称："

msgid "The profile name you entered is already in use. Try again"
msgstr "您输入的配置文件名称已被使用。请重试"

msgid "Packages to be install with this profile (space separated, leave blank to skip): "
msgstr "要与此配置文件一同安装的软件包（空格分隔，留空跳过）："

msgid "Services to be enabled with this profile (space separated, leave blank to skip): "
msgstr "要与此配置文件一同启用的服务（空格分隔，留空跳过）："

msgid "Should this profile be enabled for installation?"
msgstr "是否启用此配置文件进行安装？"

msgid "Create your own"
msgstr "创建您自己的"

msgid ""
"\n"
"Select a graphics driver or leave blank to install all open-source drivers"
msgstr ""
"\n"
"\n"
"选择一个显卡驱动程序，或留空以安装所有开源驱动程序"

msgid "Sway needs access to your seat (collection of hardware devices i.e. keyboard, mouse, etc)"
msgstr "Sway 需要访问您的 seat（硬件设备的集合，例如键盘、鼠标等）"

msgid ""
"\n"
"\n"
"Choose an option to give Sway access to your hardware"
msgstr ""
"\n"
"\n"
"选择一个选项来给 Sway 提供对您硬件的访问权限"

msgid "Graphics driver"
msgstr "显卡驱动程序"

msgid "Greeter"
msgstr "登录管理器"

msgid "Please chose which greeter to install"
msgstr "请选择要安装的登录管理器"

msgid "This is a list of pre-programmed default_profiles"
msgstr "这份列表列出了预编写的默认配置文件"

msgid "Disk configuration"
msgstr "磁盘配置"

msgid "Profiles"
msgstr "配置文件"

msgid "Finding possible directories to save configuration files ..."
msgstr "正在查找可能用于保存配置文件的目录 ..."

msgid "Select directory (or directories) for saving configuration files"
msgstr "选择一个或多个目录保存配置文件"

msgid "Add a custom mirror"
msgstr "添加自定义镜像"

msgid "Change custom mirror"
msgstr "更改自定义镜像"

msgid "Delete custom mirror"
msgstr "删除自定义镜像"

msgid "Enter name (leave blank to skip): "
msgstr "输入用户名（留空跳过）："

msgid "Enter url (leave blank to skip): "
msgstr "输入网址（留空跳过）："

msgid "Select signature check option"
msgstr "选择签名检查选项"

msgid "Select signature option"
msgstr "选择签名选项"

msgid "Custom mirrors"
msgstr "自定义镜像"

msgid "Defined"
msgstr "已定义"

msgid "Save user configuration (including disk layout)"
msgstr "保存用户配置（包括磁盘布局）"

msgid ""
"Enter a directory for the configuration(s) to be saved (tab completion enabled)\n"
"Save directory: "
msgstr ""
"输入要保存配置的目录（可按 TAB 补全）\n"
"保存目录："

msgid ""
"Do you want to save {} configuration file(s) in the following location?\n"
"\n"
"{}"
msgstr ""
"您想将 {} 个配置文件保存在以下位置吗？\n"
"\n"
"{}"

msgid "Saving {} configuration files to {}"
msgstr "正在将 {} 配置文件保存到 {}"

msgid "Mirrors"
msgstr "镜像"

msgid "Mirror regions"
msgstr "镜像区域"

msgid " - Maximum value   : {} ( Allows {} parallel downloads, allows {max_downloads+1} downloads at a time )"
msgstr " - 最大值：{}（允许 {} 个并行下载，每次允许 {max_downloads+1} 个下载）"

msgid "Invalid input! Try again with a valid input [1 to {}, or 0 to disable]"
msgstr "输入无效！请重试一个有效输入 [1 到 {}，或 0 以禁用]"

msgid "Locales"
msgstr "区域设置"

msgid "Use NetworkManager (necessary to configure internet graphically in GNOME and KDE)"
msgstr "使用 NetworkManager（在 GNOME 和 KDE 中以图形方式配置互联网所必需）"

msgid "Total: {} / {}"
msgstr "总长度：{} / {}"

msgid "All entered values can be suffixed with a unit: B, KB, KiB, MB, MiB..."
msgstr "所有输入的值都可以后缀一个单位：B、KB、KiB、MB、MiB……"

msgid "If no unit is provided, the value is interpreted as sectors"
msgstr "若没有指定单位，则值被作为扇区块号"

msgid "Enter start (default: sector {}): "
msgstr "输入起始扇区位置（默认：扇区 {}）： "

msgid "Enter end (default: {}): "
msgstr "输入末尾扇区位置（默认：{}）： "

msgid "Unable to determine fido2 devices. Is libfido2 installed?"
msgstr "无法确定 fido2 设备。libfido2 是否已安装？"

msgid "Path"
msgstr "路径"

msgid "Manufacturer"
msgstr "制造商"

msgid "Product"
msgstr "产品"

#, python-brace-format
msgid "Invalid configuration: {error}"
msgstr "无效的配置：{error}"

msgid "Type"
msgstr "类型"

msgid "This option enables the number of parallel downloads that can occur during package downloads"
msgstr "此选项启用软件包下载期间可以发生的并行下载数"

msgid ""
"Enter the number of parallel downloads to be enabled.\n"
"\n"
"Note:\n"
msgstr ""
"输入要启用的并行下载数。\n"
"\n"
"提示：\n"

msgid " - Maximum recommended value : {} ( Allows {} parallel downloads at a time )"
msgstr " - 最大推荐值：{}（每次同时允许 {} 个并行下载）"

msgid " - Disable/Default : 0 ( Disables parallel downloading, allows only 1 download at a time )\n"
msgstr " - 禁用/默认值：0（禁用并行下载，同时只允许 1 个下载）\n"

msgid "Invalid input! Try again with a valid input [or 0 to disable]"
msgstr "输入无效！请重试有效输入 [或 0 以禁用]"

msgid "Hyprland needs access to your seat (collection of hardware devices i.e. keyboard, mouse, etc)"
msgstr "Hyprland 需要访问您的 seat（硬件设备的集合，例如键盘、鼠标等）"

msgid ""
"\n"
"\n"
"Choose an option to give Hyprland access to your hardware"
msgstr ""
"\n"
"\n"
"选择一个选项来给 Hyprland 提供对您硬件的访问权限"

msgid "All entered values can be suffixed with a unit: %, B, KB, KiB, MB, MiB..."
msgstr "所有输入的值都可以后缀一个单位：%、B、KB、KiB、MB、MiB……"

#, fuzzy
msgid "Would you like to use unified kernel images?"
msgstr "您想在 zram 上使用交换分区（swap）吗？"

msgid "Unified kernel images"
msgstr ""

msgid "Waiting for time sync (timedatectl show) to complete."
msgstr ""

msgid "Time syncronization not completing, while you wait - check the docs for workarounds: https://archinstall.readthedocs.io/"
msgstr ""

msgid "Skipping waiting for automatic time sync (this can cause issues if time is out of sync during installation)"
msgstr ""

msgid "Waiting for Arch Linux keyring sync (archlinux-keyring-wkd-sync) to complete."
msgstr ""

#, fuzzy
msgid "Selected profiles: "
msgstr "删除配置文件"

msgid "Time synchronization not completing, while you wait - check the docs for workarounds: https://archinstall.readthedocs.io/"
msgstr ""

#, fuzzy
msgid "Mark/Unmark as nodatacow"
msgstr "将分区标记/取消标记为可引导"

#, fuzzy
msgid "Would you like to use compression or disable CoW?"
msgstr "您想使用 BTRFS 压缩吗？"

msgid "Use compression"
msgstr ""

msgid "Disable Copy-on-Write"
msgstr ""