Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CONTRIBUTING.md3
-rw-r--r--README.md1
-rw-r--r--archinstall/lib/disk.py44
-rw-r--r--archinstall/lib/installer.py22
-rw-r--r--archinstall/lib/plugins.py2
-rw-r--r--archinstall/lib/user_interaction.py16
-rw-r--r--examples/guided.py32
-rw-r--r--profiles/xfce4.py2
-rw-r--r--profiles/xorg.py2
-rw-r--r--setup.cfg2
10 files changed, 75 insertions, 51 deletions
diff --git a/CONTRIBUTING.md b/CONTRIBUTING.md
index a92cff91..ca4aa9e3 100644
--- a/CONTRIBUTING.md
+++ b/CONTRIBUTING.md
@@ -1,8 +1,7 @@
# Contributing to archinstall
Any contributions through pull requests are welcome as this project aims to be a community based project to ease some Arch Linux installation steps.
-Bear in mind that in the future this repo might be transferred to the official [GitLab repo under Arch Linux](http://gitlab.archlinux.org/archlinux/)
- *(if GitLab becomes open to the general public)*.
+Bear in mind that in the future this repo might be transferred to the official [GitLab repo under Arch Linux](http://gitlab.archlinux.org/archlinux/) *(if GitLab becomes open to the general public)*.
Therefore, guidelines and style changes to the code might come into effect as well as guidelines surrounding bug reporting and discussions.
diff --git a/README.md b/README.md
index 5c6c9157..c8a23f5a 100644
--- a/README.md
+++ b/README.md
@@ -106,7 +106,6 @@ with archinstall.Installer('/mnt') as installation:
installation.user_create('devel', 'devel')
installation.user_set_pw('root', 'airoot')
-
```
This installer will perform the following:
diff --git a/archinstall/lib/disk.py b/archinstall/lib/disk.py
index 33f598bf..36f19ee8 100644
--- a/archinstall/lib/disk.py
+++ b/archinstall/lib/disk.py
@@ -110,17 +110,21 @@ def select_disk_larger_than_or_close_to(devices, gigabytes, filter_out=None):
return min(copy_devices, key=(lambda device : abs(device.size - gigabytes)))
-def suggest_single_disk_layout(block_device):
+def suggest_single_disk_layout(block_device, default_filesystem=None):
+ if not default_filesystem:
+ from .user_interaction import ask_for_main_filesystem_format
+ default_filesystem = ask_for_main_filesystem_format()
+
MIN_SIZE_TO_ALLOW_HOME_PART = 40 # Gb
layout = {
- block_device : {
+ block_device.path : {
"wipe" : True,
"partitions" : []
}
}
- layout[block_device]['partitions'].append({
+ layout[block_device.path]['partitions'].append({
# Boot
"type" : "primary",
"start" : "1MiB",
@@ -133,7 +137,7 @@ def suggest_single_disk_layout(block_device):
"format" : "fat32"
}
})
- layout[block_device]['partitions'].append({
+ layout[block_device.path]['partitions'].append({
# Root
"type" : "primary",
"start" : "513MiB",
@@ -142,12 +146,12 @@ def suggest_single_disk_layout(block_device):
"size" : "100%" if block_device.size < MIN_SIZE_TO_ALLOW_HOME_PART else f"{min(block_device.size, 20)*1024}MiB",
"mountpoint" : "/",
"filesystem" : {
- "format" : "btrfs"
+ "format" : default_filesystem
}
})
if block_device.size >= MIN_SIZE_TO_ALLOW_HOME_PART:
- layout[block_device]['partitions'].append({
+ layout[block_device.path]['partitions'].append({
# Home
"type" : "primary",
"encrypted" : False,
@@ -156,14 +160,18 @@ def suggest_single_disk_layout(block_device):
"size" : "100%",
"mountpoint" : "/home",
"filesystem" : {
- "format" : "btrfs"
+ "format" : default_filesystem
}
})
return layout
-def suggest_multi_disk_layout(block_devices):
+def suggest_multi_disk_layout(block_devices, default_filesystem=None):
+ if not default_filesystem:
+ from .user_interaction import ask_for_main_filesystem_format
+ default_filesystem = ask_for_main_filesystem_format()
+
MIN_SIZE_TO_ALLOW_HOME_PART = 40 # Gb
ARCH_LINUX_INSTALLED_SIZE = 20 # Gb, rough estimate taking in to account user desktops etc. TODO: Catch user packages to detect size?
@@ -175,17 +183,17 @@ def suggest_multi_disk_layout(block_devices):
log(f"Suggesting multi-disk-layout using {len(block_devices)} disks, where {root_device} will be /root and {home_device} will be /home", level=logging.DEBUG)
layout = {
- root_device : {
+ root_device.path : {
"wipe" : True,
"partitions" : []
},
- home_device : {
+ home_device.path : {
"wipe" : True,
"partitions" : []
},
}
- layout[root_device]['partitions'].append({
+ layout[root_device.path]['partitions'].append({
# Boot
"type" : "primary",
"start" : "1MiB",
@@ -198,7 +206,7 @@ def suggest_multi_disk_layout(block_devices):
"format" : "fat32"
}
})
- layout[root_device]['partitions'].append({
+ layout[root_device.path]['partitions'].append({
# Root
"type" : "primary",
"start" : "513MiB",
@@ -207,11 +215,11 @@ def suggest_multi_disk_layout(block_devices):
"size" : "100%",
"mountpoint" : "/",
"filesystem" : {
- "format" : "btrfs"
+ "format" : default_filesystem
}
})
- layout[home_device]['partitions'].append({
+ layout[home_device.path]['partitions'].append({
# Home
"type" : "primary",
"encrypted" : False,
@@ -220,7 +228,7 @@ def suggest_multi_disk_layout(block_devices):
"size" : "100%",
"mountpoint" : "/home",
"filesystem" : {
- "format" : "btrfs"
+ "format" : default_filesystem
}
})
@@ -931,7 +939,9 @@ class Filesystem:
time.sleep(0.025)
- time.sleep(0.5) # Let the kernel catch up with quick block devices (nvme for instance)
+ # Todo: Find a better way to detect if the new UUID of the partition has showed up.
+ # But this will address (among other issues)
+ time.sleep(float(storage['arguments'].get('disk-sleep', 2.0))) # Let the kernel catch up with quick block devices (nvme for instance)
return self.blockdevice.get_partition(uuid=(previous_partition_uuids ^ {partition.uuid for partition in self.blockdevice.partitions.values()}).pop())
def set_name(self, partition: int, name: str):
@@ -1069,4 +1079,4 @@ def find_partition_by_mountpoint(block_devices, relative_mountpoint :str):
for device in block_devices:
for partition in block_devices[device]['partitions']:
if partition.get('mountpoint', None) == relative_mountpoint:
- return partition \ No newline at end of file
+ return partition
diff --git a/archinstall/lib/installer.py b/archinstall/lib/installer.py
index 3efb0499..2aac8510 100644
--- a/archinstall/lib/installer.py
+++ b/archinstall/lib/installer.py
@@ -163,10 +163,12 @@ class Installer:
self.log(f'Installing packages: {packages}', level=logging.INFO)
if (sync_mirrors := SysCommand('/usr/bin/pacman -Syy')).exit_code == 0:
- if (pacstrap := SysCommand(f'/usr/bin/pacstrap {self.target} {" ".join(packages)}', peak_output=True)).exit_code == 0:
+ if (pacstrap := SysCommand(f'/usr/bin/pacstrap {self.target} {" ".join(packages)} --noconfirm', peak_output=True)).exit_code == 0:
return True
else:
- self.log(f'Could not strap in packages: {pacstrap.exit_code}', level=logging.INFO)
+ self.log(f'Could not strap in packages: {pacstrap}', level=logging.ERROR, fg="red")
+ self.log(f'Could not strap in packages: {pacstrap.exit_code}', level=logging.ERROR, fg="red")
+ raise RequirementError("Pacstrap failed. See /var/log/archinstall/install.log or above message for error details.")
else:
self.log(f'Could not sync mirrors: {sync_mirrors.exit_code}', level=logging.INFO)
@@ -401,9 +403,6 @@ class Installer:
self.pacstrap(self.base_packages)
self.helper_flags['base-strapped'] = True
- with open(f"{self.target}/etc/fstab", "a") as fstab:
- fstab.write("\ntmpfs /tmp tmpfs defaults,noatime,mode=1777 0 0\n") # Redundant \n at the start? who knows?
-
# TODO: Support locale and timezone
# os.remove(f'{self.target}/etc/localtime')
# sys_command(f'/usr/bin/arch-chroot {self.target} ln -s /usr/share/zoneinfo/{localtime} /etc/localtime')
@@ -429,7 +428,7 @@ class Installer:
return True
- def add_bootloader(self, _device, bootloader='systemd-bootctl'):
+ def add_bootloader(self, bootloader='systemd-bootctl'):
for plugin in plugins.values():
if hasattr(plugin, 'on_add_bootloader'):
# Allow plugins to override the boot-loader handling.
@@ -535,14 +534,15 @@ class Installer:
SysCommand(f"/usr/bin/arch-chroot {self.target} {enable_CRYPTODISK} {_file}")
if has_uefi():
- self.pacstrap('efibootmgr')
- o = b''.join(SysCommand(f'/usr/bin/arch-chroot {self.target} grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=GRUB'))
- SysCommand('/usr/bin/arch-chroot /mnt grub-mkconfig -o /boot/grub/grub.cfg')
+ self.pacstrap('efibootmgr') # TODO: Do we need?
+ SysCommand(f'/usr/bin/arch-chroot {self.target} grub-install --target=x86_64-efi --efi-directory=/boot --bootloader-id=GRUB')
+ SysCommand(f'/usr/bin/arch-chroot {self.target} grub-mkconfig -o /boot/grub/grub.cfg')
self.helper_flags['bootloader'] = True
return True
else:
- o = b''.join(SysCommand(f'/usr/bin/arch-chroot {self.target} grub-install --target=i386-pc --recheck {_device.path}'))
- SysCommand('/usr/bin/arch-chroot /mnt grub-mkconfig -o /boot/grub/grub.cfg')
+ boot_partition = filesystem.find_partition(mountpoint=f"{self.target}/boot")
+ SysCommand(f'/usr/bin/arch-chroot {self.target} grub-install --target=i386-pc --recheck {boot_partition.path}')
+ SysCommand(f'/usr/bin/arch-chroot {self.target} grub-mkconfig -o /boot/grub/grub.cfg')
self.helper_flags['bootloader'] = True
else:
raise RequirementError(f"Unknown (or not yet implemented) bootloader requested: {bootloader}")
diff --git a/archinstall/lib/plugins.py b/archinstall/lib/plugins.py
index 24fbd8ee..dab5d2b0 100644
--- a/archinstall/lib/plugins.py
+++ b/archinstall/lib/plugins.py
@@ -98,4 +98,4 @@ def load_plugin(path :str): # -> module (not sure how to write that in type defi
log(err, level=logging.ERROR)
log(f"The above error was detected when initiating the plugin: {path}", fg="red", level=logging.ERROR)
else:
- log(f"Plugin '{path}' is missing a valid entry-point or is corrupt.", fg="yellow", level=logging.WARNING) \ No newline at end of file
+ log(f"Plugin '{path}' is missing a valid entry-point or is corrupt.", fg="yellow", level=logging.WARNING)
diff --git a/archinstall/lib/user_interaction.py b/archinstall/lib/user_interaction.py
index ca8fb6f6..be74f9b9 100644
--- a/archinstall/lib/user_interaction.py
+++ b/archinstall/lib/user_interaction.py
@@ -575,14 +575,14 @@ def manage_new_and_existing_partitions(block_device :BlockDevice) -> dict:
# log(f"Selecting which partitions to re-use on {block_device}...", fg="yellow", level=logging.INFO)
# partitions = generic_multi_select(block_device.partitions.values(), "Select which partitions to re-use (the rest will be left alone): ", sort=True)
# partitions_to_wipe = generic_multi_select(partitions, "Which partitions do you wish to wipe (multiple can be selected): ", sort=True)
-
+
# mountpoints = {}
# struct = {
# "partitions" : []
# }
# for partition in partitions:
# mountpoint = input(f"Select a mountpoint (or skip) for {partition}: ").strip()
-
+
# part_struct = {}
# if mountpoint:
# part_struct['mountpoint'] = mountpoint
@@ -590,7 +590,7 @@ def manage_new_and_existing_partitions(block_device :BlockDevice) -> dict:
# part_struct['boot'] = True
# if has_uefi():
# part_struct['ESP'] = True
- # elif mountpoint == '/' and
+ # elif mountpoint == '/' and
# if partition.uuid:
# part_struct['PARTUUID'] = partition.uuid
# if partition in partitions_to_wipe:
@@ -632,15 +632,15 @@ def manage_new_and_existing_partitions(block_device :BlockDevice) -> dict:
if not task:
break
-
+
if task == 'Create a new partition':
if partition_type == 'gpt':
# https://www.gnu.org/software/parted/manual/html_node/mkpart.html
# https://www.gnu.org/software/parted/manual/html_node/mklabel.html
name = input("Enter a desired name for the partition: ").strip()
-
+
fstype = input("Enter a desired filesystem type for the partition: ").strip()
-
+
start = input(f"Enter the start sector (percentage or block number, default: {block_device.largest_free_space[0]}): ").strip()
if not start.strip():
start = block_device.largest_free_space[0]
@@ -753,8 +753,8 @@ def select_individual_blockdevice_usage(block_devices :list):
for device in block_devices:
layout = manage_new_and_existing_partitions(device)
-
- result[device] = layout
+
+ result[device.path] = layout
return result
diff --git a/examples/guided.py b/examples/guided.py
index 4e6d1bc5..8353b76b 100644
--- a/examples/guided.py
+++ b/examples/guided.py
@@ -1,6 +1,7 @@
import json
import logging
import os
+import pathlib
import time
import archinstall
@@ -28,7 +29,9 @@ archinstall.log(f"Disk states before installing: {archinstall.disk_layouts()}",
def load_config():
if archinstall.arguments.get('harddrives', None) is not None:
- archinstall.arguments['harddrives'] = [archinstall.BlockDevice(BlockDev) for BlockDev in archinstall.arguments['harddrives'].split(',')]
+ if type(archinstall.arguments['harddrives']) is str:
+ archinstall.arguments['harddrives'] = archinstall.arguments['harddrives'].split(',')
+ archinstall.arguments['harddrives'] = [archinstall.BlockDevice(BlockDev) for BlockDev in archinstall.arguments['harddrives']]
# Temporarily disabling keep_partitions if config file is loaded
# Temporary workaround to make Desktop Environments work
if archinstall.arguments.get('profile', None) is not None:
@@ -51,7 +54,19 @@ def load_config():
archinstall.storage['gfx_driver_packages'] = AVAILABLE_GFX_DRIVERS.get(archinstall.arguments.get('gfx_driver', None), None)
if archinstall.arguments.get('servers', None) is not None:
archinstall.storage['_selected_servers'] = archinstall.arguments.get('servers', None)
-
+ if archinstall.arguments.get('disk_layouts', None) is not None:
+ if (dl_path := pathlib.Path(archinstall.arguments['disk_layouts'])).exists() and str(dl_path).endswith('.json'):
+ try:
+ with open(dl_path) as fh:
+ archinstall.storage['disk_layouts'] = json.load(fh)
+ except Exception as e:
+ raise ValueError(f"--disk_layouts does not contain a valid JSON format: {e}")
+ else:
+ try:
+ archinstall.storage['disk_layouts'] = json.loads(archinstall.arguments['disk_layouts'])
+ except:
+ raise ValueError("--disk_layouts=<json> needs either a JSON file or a JSON string given with a valid disk layout.")
+
def ask_user_questions():
"""
First, we'll ask the user for a bunch of user input.
@@ -94,14 +109,12 @@ def ask_user_questions():
# Ask which harddrives/block-devices we will install to
# and convert them into archinstall.BlockDevice() objects.
- if archinstall.arguments.get('harddrives', None):
- archinstall.arguments['harddrives'] = [archinstall.BlockDevice(BlockDev) for BlockDev in archinstall.arguments['harddrives'].split(',')]
- else:
+ if archinstall.arguments.get('harddrives', None) is None:
archinstall.arguments['harddrives'] = archinstall.generic_multi_select(archinstall.all_disks(),
text="Select one or more harddrives to use and configure (leave blank to skip this step): ",
allow_empty=True)
- if archinstall.arguments.get('harddrives', None):
+ if archinstall.arguments.get('harddrives', None) is not None and archinstall.storage.get('disk_layouts', None) is None:
archinstall.storage['disk_layouts'] = archinstall.select_disk_layout(archinstall.arguments['harddrives'])
# Get disk encryption password (or skip if blank)
@@ -238,8 +251,7 @@ def perform_filesystem_operations():
for drive in archinstall.arguments['harddrives']:
with archinstall.Filesystem(drive, mode) as fs:
- fs.load_layout(archinstall.storage['disk_layouts'][drive])
-
+ fs.load_layout(archinstall.storage['disk_layouts'][drive.path])
def perform_installation(mountpoint):
"""
@@ -269,7 +281,7 @@ def perform_installation(mountpoint):
installation.set_mirrors(archinstall.arguments['mirror-region']) # Set the mirrors in the installation medium
if archinstall.arguments["bootloader"] == "grub-install" and has_uefi():
installation.add_additional_packages("grub")
- installation.add_bootloader(archinstall.arguments["harddrive"], archinstall.arguments["bootloader"])
+ installation.add_bootloader(archinstall.arguments["bootloader"])
# If user selected to copy the current ISO network configuration
# Perform a copy of the config
@@ -359,4 +371,4 @@ if not archinstall.arguments.get('silent'):
ask_user_questions()
perform_filesystem_operations()
-perform_installation(archinstall.storage.get('MOUNT_POINT', '/mnt')) \ No newline at end of file
+perform_installation(archinstall.storage.get('MOUNT_POINT', '/mnt'))
diff --git a/profiles/xfce4.py b/profiles/xfce4.py
index 8dbb04ec..89c04f7c 100644
--- a/profiles/xfce4.py
+++ b/profiles/xfce4.py
@@ -10,6 +10,8 @@ __packages__ = [
"pavucontrol",
"lightdm",
"lightdm-gtk-greeter",
+ "gvfs",
+ "network-manager-applet",
]
diff --git a/profiles/xorg.py b/profiles/xorg.py
index ce13664d..b8f33068 100644
--- a/profiles/xorg.py
+++ b/profiles/xorg.py
@@ -39,6 +39,8 @@ if __name__ == 'xorg':
try:
if "nvidia" in archinstall.storage.get("gfx_driver_packages", None):
if "linux-zen" in archinstall.storage['installation_session'].base_packages or "linux-lts" in archinstall.storage['installation_session'].base_packages:
+ for kernel in archinstall.storage['installation_session'].kernels:
+ archinstall.storage['installation_session'].add_additional_packages(f"{kernel}-headers") # Fixes https://github.com/archlinux/archinstall/issues/585
archinstall.storage['installation_session'].add_additional_packages("dkms") # I've had kernel regen fail if it wasn't installed before nvidia-dkms
archinstall.storage['installation_session'].add_additional_packages("xorg-server xorg-xinit nvidia-dkms")
else:
diff --git a/setup.cfg b/setup.cfg
index e5d79ef3..661c2cf6 100644
--- a/setup.cfg
+++ b/setup.cfg
@@ -29,7 +29,7 @@ include =
archinstall.*
[options.package_data]
-archinstall =
+archinstall =
examples/*.py
profiles/*.py
profiles/applications/*.py