| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
* set util binary paths relative to top_builddir
* set pactest.py path relative to top_srcdir
* include tap.py in check_SCRIPTS
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This defines a level of interest a user has in a repository. These are
described by the bitmask flags in the alpm_db_usage_t enum:
ALPM_DB_USAGE_SEARCH: repo is valid for searching
ALPM_DB_USAGE_INSTALL: repo is valid for installs (e.g. -S pkg)
ALPM_DB_USAGE_UPGRADE: repo is valid for sysupgrades
ALPM_DB_USAGE_ALL: all of the above are valid
Explicitly listing the contents of a repo will always be valid, and the
repo will always be refreshed appropriately on sync operations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
* append "/" to directories before searching package file lists
* use lstat over stat so symlinks aren't resolved
* fix the inverted check for stat's return value
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This functionality can be provided by a test harness. Having pactest
output this information as well clutters the result log created by
automake.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This removes the --test switch, making it easier to call pactest from
a test harness.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Our test scripts currently require that the first argument be the
library or binary to be tested. This makes integrating them with
automake which doesn't have a mechanism for passing specific arguments
to individual tests. Instead, provide a default built from paths in the
environment which can be provided to all test scripts by automake.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Each test produces a single TAP result with the rules run in a sub-test.
This reduces output when run under automake and makes it possible to
continue setting expectfailure at the test level rather than per-rule.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Tests should only be skipped when they aren't relevant, not when the
test itself is bad.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use the architecture of the python interpreter running the test to
detect 32bit systems.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Using setlocale in the backend is bound to lead to frontend issues
and we have have been using epoch in our databases since April 2007
(commit 47622eef). Remove support for old style times.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On upgrades, indirect dependencies were not being detected if there was
a dependency in between them that was not part of the transaction. For
example, with the dependency chain: pkg1 -> pkg2 -> pkg3, if pkg1 and
pkg3 are being upgraded but not pkg2 pacman would not order pkg1 and
pkg3 properly.
This was particularly problematic when replacements were involved
because the replaced package(s) would be removed at the start of the
transaction. If an install script required the replacer and lacked
a direct dependency, it could fail.
Fixes FS#32764.
Partially fixes FS#23011.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Packages removed due to conflicts are always removed at the beginning of
the transaction and as such can be included in the check for whether all
owners of a directory will be removed in a transaction. Installed
versions of packages being upgraded, other than the one with the
conflict, cannot be used because our transaction ordering is not
intelligent enough to ensure that they are removed prior to the
installation of the conflicted package.
Also, return false from dir_belongsto_pkgs on errors. Previously, we
simply continued which could return true even if we were unable to
actually establish that the package owned the entire tree.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
After the initial checks, we either use the path as a directory and have
to append the trailing slash anyway or use it as a file in which case
the trailing slash should be excluded.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
LC_ALL=C is required to force pacman's output to English for tests that
rely on that output, but setting it in Makefile.am results in those
tests breaking under different locales when pactest.py is run directly.
This will also ease an eventual transition to python3 which LC_ALL=C
causes to default to ascii encoded strings, creating problems for tests
with unicode strings.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
This new option disables the prepare function. Useful in combination
with -o to get an unpatched copy of the sources for testing purpose.
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Remove a question that hasn't been used since the 3.0 days. To prevent
us from having an ugly enum of questions that is missing a bitmask, this
changes the API of the hidden --ask option.
Signed-off-by: Connor Behan <connor.behan@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
open() is the standard way to open a file in python.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
TarInfo objects default to mode 0644 while mkfile in util.py uses 0755
for directories, causing pacman warnings about differing permissions on
tests involving package updates. Set the mode on TarInfo directory
objects to 0755 unless the test specifies a different mode.
Bug referenced in FS#30723.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Several tests require complete file lists in order to provide accurate
results. These can be non-obvious. Adding missing parent directories
helps insure the integrity of tests against human error. Filling in
parent directories also allows us to check that file lists are actually
valid.
There didn't seem to be a good place to do this that was always
guaranteed to be run, so this adds a finalize() function to packages
that will always be run before the package is actually used to allow for
this type of tidying.
Fixes FS#30723
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Since 882bff36 literals would be searched before replacers, resulting in a
package being replaced by another not actually being replaced under certain
conditions (e.g. they're both in the same repo).
This change effectively reversed the expectations in test sync132. This patch
switches the order back to replacers first, thus making sure if a package is
replacing another one, the change will always happen, even if both are in the
same repo.
Note that a package replacing another one in a repo with higher priority will
not be done, see FS#11737 and test sync1105
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
During a sysupgrade, if a package is replaced by another, and an update for the
former package is found (on another repo) the replaced package would be
re-installed.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
alpm_filelist_contains was being used to search for resolved paths, but
searching in the unresolved paths, causing it to miss matches. We
always search unresolved paths and search the resolved paths if
available because _alpm_filelist_resolve is not public and requires
a context handle, so it can't be called from alpm_filelist_contains.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We were comparing files based on resolved paths but returning the
original file_t structures, which were not necessarily in the same
order. The extra file_t information was only being used to determine if
the file was a directory which can be accomplished by testing for
a trailing slash, so just return the resolved path.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We were comparing files based on resolved paths but returning the
original file_t structures, which were not necessarily in the same
order. The additional file_t information was never used, so just return
the resolved path.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Installing filesystem entries first allows the filesystem to provide
a symlink to a directory. Packages will then be able to use the symlink
as if it were a directory instead of causing an error.
For example:
self.filesystem = ["dir/", "link -> dir/"]
pkg = pmpkg("pkg1")
pkg.files = ["link/file"]
self.addpkg2db("local", pkg)
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We don't want test files to do any checks for fakechroot since we will
print a warning if it is not found.
Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes FS#33551.
Signed-off-by: Chirantan Ekbote <chirantan.ekbote@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Teach pacsort to understand package filenames and optionally strip away
some of the context. alpm_pkg_vercmp() intentionally only understands
pure versions, so strings such as '18.0-2-x86_64' and '18.0.1-1-x86_64'
will be compared wrongly.
Partially addresses FS#33455.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The FHS (2.3) says having ldconfig in /sbin is optional and it is usually
located in /usr/sbin. So /sbin/ldconfig should not be hard coded in
pacman. Instead, provide a configure option --with-ldconfig that defaults
to the current path.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The leading / makes the pactest suite look for the file in the users
filesystem. This meant the ldconfig tests always passed (even when
broken in pacman...).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman can be configured to use a different shell than /bin/sh for
scriplets. Pass the cnfigured value to the pactest suite and make the
necessary "copy" of the shell in the test root.
Also update all copyright years in the pactest suite.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This reverts commit 4a8c2852a887d2b1aaa43be3071ab586eb24b9e3.
This reverts commit 993700bc6b12cd291544d2a22845f480e8a7925e.
This reverts commit bb4d2b72c1d35ab9d65d632be0dcaf00cfa7d600.
This reverts commit 60b192e3836a150eb6950ce52241efebbee00f11.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to support a variety of values for the --with-scriptlet-shell
configure flag, pmtest has to be aware of what kind of path was passed,
be it an absolute path or a fragment for a path lookup. For absolute
paths, leave the path alone. For fragments, search the PATH environment
var for the resolved path to the binary. In both cases, join the
resultant path to the root directory defined for the test, not a
pre-determined bin directory.
Fixes FS#31552.
With-contribution-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Teach pacman to save backup files with extension .pacsave.n, where n is a
positive integer. The current backup file shall be saved as <name>.pacsave,
while existing .pacsave.n files will be renamed to <name>.pacsave.n+1
Example:
1. You have subversion installed in your local repo. /etc/conf.d/svnserve
is a file to be backed up. It contains local modifications
2. You remove subversion from your repo. /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
2. You install subversion again
3. You edit /etc/conf.d/svnserve
4. You remove subversion. The existing /etc/conf.d/svnserve.pacsave is renamed
to /etc/conf.d/svnserve.pacsave.1 and /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Rebased from original email and adjusted for util-common usage.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|