Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2011-09-26Revamp pacman signal handlerDan McGee
* All errors now go to stderr, so do the same here and simplify the writing of the error message. * Add SIGHUP to the handled signal list, and don't repeat code. * Attempt to release the transaction (e.g. remove the lock file) for all of HUP, INT, and TERM. Signals HUP and INT respects transaction state, TERM will immediately terminate the process. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Regenerate message catalogs and translationsv4.0.0rc2Dan McGee
We've had a bit of churn since the last time this was done. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Translation file updates from TransifexDan McGee
Pick up any updates before I push new source messages out to the service. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add status and check for key being disabledDan McGee
Because we aren't using gpgv and a dedicated keyring that is known to be all safe, we should honor this flag being set on a given key in the keyring to know to not honor it. This prevents a key from being reimported that a user does not want to be used- instead of deleting, one should mark it as disabled. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Add new import key question enum value and stub frontend functionDan McGee
This is for eventual use by the PGP key import code. Breaking this into a separate commit now makes the following patches a bit easier to understand. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Fix signature printing in package infoDan McGee
pm_asprintf() does not return a length as asprintf() does. Fail. Make sure it is not -1 as that is the only failure condition. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22config parsing: add note if libcurl disabled and no XferCommandDan McGee
Just a helpful warning for those users in this unenviable position. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22config parsing: include file and line number in more errorsDan McGee
Before: $ pacman -Si pacman error: invalid value for 'SigLevel' : 'FooValue' After: $ ./src/pacman/pacman -Si pacman error: config file /etc/pacman.conf, line 88: invalid value for 'SigLevel' : 'FooValue' Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Pull option names out of messages in config parsingDan McGee
This allows some message reuse, as well as making it clear to translators what *not* to translate. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Check capabilities in SigLevel option parsingDan McGee
Only allow turning it on if the backend library has support for it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Move default siglevel value from backend to frontendDan McGee
This takes the libraries hidden default out of the equation: hidden in the sense that we can't even find out what it is until we create a handle. This is a chicken-and-egg problem where we have probably already parsed the config, so it is hard to get the bitmask value right. Move it to the frontend so the caller can do whatever the heck they want. This also exposes a shortcoming where the frontend doesn't know if the library even supports signatures, so we should probably add a alpm_capabilities() method which exposes things like HAS_DOWNLOADER, HAS_SIGNATURES, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Fix int/size_t type in alpm_list_count() callDan McGee
alpm_list_count() returns size_t, which we should use to store the result since it is easy enough to format for printing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Split package validation and load loopsDan McGee
This adds a some new callback event and progress codes for package loading, which was formerly bundled in with package validation before. The main sync.c loop where loading occurred is now two loops running sequentially. The behavior should not change with this patch outside of progress and event display; more changes will come in following patches. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman/upgrade: print 'loading packages...' only onceDave Reisner
Do this outside the loop to prevent the message from being displayed (and pluralized!) for each individual package. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20pacman: use dynamic string allocation where it makes senseDan McGee
None of these are hot-code paths, and at least the target reading has little need for an arbitrary length limitation (however crazy it might be to have longer arguments). Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20utils/cleanupdelta: remove unneeded syncdbpathDan McGee
This variable was totally unused. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-20Flip getcwd()/chdir() for open()/fchdir() in the frontendDan McGee
Just like we did in libalpm in commit 288a81d8470b1. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18src/util: provide strndup definitions where neededDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18pactree: include missing ctype.h headerDave Reisner
needed for isspace() -- avoids warnings on OSX. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14pacman: add short opt '-p' for --print to -{S,R}hDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14Don't duplicate header stringsDan McGee
There is no need to print them into buffers; we can use the values returned by gettext() directly without issue. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11download callback: show decimal places in rate if we have roomDan McGee
Display now looks like this, whereas before we would have just showed '2M/s' for the extra repository download. The cutoff is placed at 100.0 to ensure we only use 4 character slots of width (e.g. '99.9', '100'). :: Synchronizing package databases... testing 39.9 KiB 470K/s 00:00 [######################] 100% core 51.4 KiB 469K/s 00:00 [######################] 100% extra 768.8 KiB 2.1M/s 00:00 [######################] 100% community-testing 1941.0 B 54.4M/s 00:00 [######################] 100% multilib 26.6 KiB 458K/s 00:00 [######################] 100% community 449.8 KiB 1649K/s 00:00 [######################] 100% Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-11Move download callback static vars into functionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-08Print 'loading packages' message on -U operationsDan McGee
This will be the first thing printed when doing an upgrade. Currently there is no output at all until we start resolving dependencies, which can be a while in if specifying very large targets on the command line, in which case it is nice to let the user know we are doing something. Addresses FS#25822 in the most KISS way possible. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07query check: use provided filelist count instead of keeping trackDan McGee
We don't need to keep track of how many files are in a package now that said value is provided to us. It also makes more sense to use size_t here for types rather than the (hopefully never too short) int. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-07Remove unnecessary castDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-06sync: add missing newline in warning messageDave Reisner
Dan: fix the other missing one too. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Add -p/--print tip for -Q operations on filepathDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Former transaction callback rename refactorDan McGee
Put all the callback stuff in alpm.h in one spot, and make the following renames for clarity with the new structure: ALPM_TRANS_EVT_* --> ALPM_EVENT_* ALPM_TRANS_CONV_* --> ALPM_QUESTION_* ALPM_TRANS_PROGRESS_* --> ALPM_PROGRESS_* alpm_option_get_convcb() --> alpm_option_get_questioncb() alpm_option_set_convcb() --> alpm_option_set_questioncb() Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Move all callbacks up to the handle levelDan McGee
This was just disgusting before, unnecessary to limit these to only usage in a transaction. Still a lot of more room for cleanup but we'll start by attaching them to the handle rather than the transaction we may or may not even want to use these callbacks. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02Be fully silent on any -Sp operationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-01pacman/callback: reuse strlen calculationDave Reisner
Call strlen earlier in the dl progress callback, and reuse this length to replace some heavier str*() calls with more optimized mem*() replacements. This also gets rid of a false assumption that the ending string will ever be longer than the original string. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Improve advice for sync ops when db.lck is presentPang Yan Han
When the database is locked, sync operations involving transactions, such as pacman -Syy, show the following: :: Synchronizing package databases... error: failed to update core (unable to lock database) error: failed to update extra (unable to lock database) error: failed to update community (unable to lock database) error: failed to update multilib (unable to lock database) error: failed to synchronize any databases Whereas pacman -U <pkg> shows: error: failed to init transaction (unable to lock database) if you're sure a package manager is not already running, you can remove /var/lib/pacman/db.lck Which is much more meaningful, since the presence of db.lck may indicate an erroneous lockfile instead of an ongoing transaction. Improve the error messages for sync operations by advising the user to remove db.lck if he is sure that no package manager is running. Signed-off-by: Pang Yan Han <pangyanhan@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29Ensure progress callback updates if XX/YY numerator changesDan McGee
We only updated if the percentage incremented and enough time had elapsed, even though the numerator of the current/howmany fraction may have changed. Ensure we proceed with the progress bar update in these cases so as to not mislead the user. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacsort: use boolean, not binary OR operationDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Allow access to package origin dataDan McGee
Add new alpm_pkg_get_origin() method, use it in the front end now that the enum constants are publicly available. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Removed multiple definitions of pkgfrom_tDiogo Sousa
libalpm now exports type alpm_pkgfrom_t in alpm.h, which may be used by frontends. Pacman now uses alpm_pkgfrom_t instead of replicating that type (pkg_from as was in src/pacman/package.h) Updated API change in README. Signed-off-by: Diogo Sousa <diogogsousa@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Better error handling out of package load methodDan McGee
There are many other ways to fail a package load other than "file not found". We should also use the correct error code in this case. Clean it up a bit in the various callers. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Refactor signature result return formatDan McGee
I was trying to take a shortcut and not introduce a wrapper struct for the signature results, so packed it all into alpm_sigresult_t in the first iteration. However, this is painful when one wants to add new fields or only return information regarding a single signature. Refactor the type into a few components which are exposed to the end user, and will allow a lot more future flexibility. This also exposes more information regarding the key to the frontend than was previously available. The "private" void *data pointer is used by the library to store the actual key object returned by gpgme; it is typed this way so the frontend has no expectations of what is there, and so we don't have any hard gpgme requirement in our public API. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28pacman.c: Remove redundant strdup() in parsearg_global()Lukas Fleischer
config_set_arch() already calls strdup(). Remove strdup() from the config_set_arch() invocation to avoid a memory leak. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-28Make sync error message smarter on unfound targetsDan McGee
We had two issues here. One is a file with an absolute path passed to -S results in a cryptic error message due to the database name being '\0'. The second is not realizing you should be doing -U instead of -S. Fix both of these to transform this: $ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz error: database not found: to this: $ sudo pacman -S /tmp/binutils-2.21.1-2-i686.pkg.tar.xz error: target not found: /tmp/binutils-2.21.1-2-i686.pkg.tar.xz warning: '/tmp/binutils-2.21.1-2-i686.pkg.tar.xz' is a file, did you mean -U/--upgrade instead of -S/--sync? Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25strtrim: don't move empty stringDan McGee
There were many cases where the string coming in was a blank line, e.g. "\n\0", length 1. The trim routine starts by trimming leading spaces, thus trimming everything. We would then proceed to do a memmove of the NULL byte, which is completely worthless as we can just assign it instead. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Remove short/long label distinctionDan McGee
We only used short labels in one place, and the short label is always the first character of the long label anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Slight refresh of the download progress callbackDan McGee
This cleans up some of the mess we have here. * switch to long units for the download size * omit the .0 decimal part from the download rate * omit the almost always zero HH: from estimated time if eta_h == 0 * Display --:-- if eta_h > 99; formatting was screwed up before The net result of this is we usually have 1 more character to use for filename display. Before: extra 500.9K 1242.4K/s 00:00:00 [######################] 100% community-testing 947.0B 28.2M/s 00:00:00 [######################] 100% multilib 26.5K 405.1K/s 00:00:00 [######################] 100% community 450.6K 1238.3K/s 00:00:00 [######################] 100% After: extra 500.9 KiB 1118K/s 00:00 [######################] 100% community-testing 947.0 B 23M/s 00:00 [######################] 100% multilib 26.5 KiB 255K/s 00:00 [######################] 100% community 450.6 KiB 1211K/s 00:00 [######################] 100% Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add a few more sizes to humanize_sizes()Dan McGee
Because why the hell not? Exbibyte, zebibyte, and yobibyte are going in, even though nothing bigger than the 2^60 exbibyte can be represented using an off_t variable anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Add new 'lt' and 'zh_TW' translations from transifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-25Update existing translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-23Retrieve default SigLevel value from backend after initial settingDan McGee
This ensures we grab and use the library default once we have processed the global SigLevel setting, but before processing the repo-specific settings. This means the following two configs will now evaluate the same, as the backend currently defaults to 'Optional': Config 1: [options] # nothing here [repo] SigLevel = TrustAll Config 2: [options] SigLevel = Optional [repo] SigLevel = TrustAll Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22pacman/util: use string_length to calculate line lengthDave Reisner
This is measuring strings that are potentially localized, so we need a multibyte aware function to count characters instead of bytes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-22Print callback messages to stderrAllan McRae
Fixes FS#25099. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>