Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2018-09-19repo-add: add support for the zst formatEli Schwartz
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: add support for the zst formatEli Schwartz
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: lint_pkgver: Run even if PKGVERFUNCLuke Shumaker
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver() will change the value of pkgver anyway, and there's no point in linting the old value. update_pkgver() will call check_pkgver() itself to validate the new value. However, that "optimization" only holds if we're definitely going to call update_pkgver() later; and that's way more complicated than if (( PKGVERFUNC )); then it's more like: if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then Which is to say: If I have a PKGBUILD with pkgver(): * if I run `makepkg -g` I expect it to lint pkgver, but it won't * if I run `makepkg -R` I expect it to lint pkgver, but it won't * ... So let's fix that. Rather than try to keep a huge list of conditions in sync with the flow of makepkg.sh.in, let's just drop it. As far as I can tell, the only thing that skipping lint_pkgver() really enables is letting the PKGBUILD author write `pkgver=` in the initial version, and letting pkgver() fill it in. They can just start writing `pkgver=0` for that workflow. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19makepkg: reject PKGBUILDs with both split and non-split package functionsEli Schwartz
We accept package_foo() in non-split packages, because it's easier to switch to/from a split package just by removing a pkgname element. But it makes no sense to have both in one PKGBUILD. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19libmakepkg/lint_config: fix lint_variable actually running the PKGBUILD lintEli Schwartz
Due to a copy-paste error when initially implementing this, it actually uses a duplicate function name, usually resulting in lint_pkgbuild overwriting the function definition. Then the PKGBUILD lint gets run twice, one time before the PKGBUILD is even sourced -- to potentially surprising results, like erroring out on a pre-existing shell definition that doesn't match our expectations. Seen in the wild with lint_config triggering an error for 'declare -x arch="foo"' Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-19scripts: deduplicate localized copyright messagesEli Schwartz
We don't need to translate the "Copyright YEAR AUTHOR" part, no part of it should probably be translated and it definitely shouldn't turn every single license terms notice into a separate translation just because the author/year is different. Fixes FS#58452 Also consistently add a blank line after the copyright and before the license terms. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-09-18Revert "makepkg: add whirlpool to the list of hashing algorithms"Eli Schwartz
This reverts commit 9cdfd18739cc4b0e2b2efeb9a92a3ea612c8505f. We've never documented whirlpoolsums support in the manpage and no one really seems to have realized we support it, let alone use it -- except for a few parabola packages, being the contributor's motivation for adding support. The problem is that for two years the code has been broken. In commit 577701250d645d1fc1a505cde34aedbeb3208ea5 we moved to coreutils to provide checksum commands, rather than openssl, but there is no whirlpoolsums binary. Properly fixing this would require re-adding a dependency on openssl, independent of the libalpm crypto backend -- which defeats the purpose of moving to coreutils in the general case. nettle-hash does not provide a whirlpool algorithm any more than it does base64 (the original reason for moving to coreutils). Therefore, we should just drop support for this again. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29makepkg: don't print status for run_function when in a subshellEli Schwartz
It's most likely a case where output is being captured, so we shouldn't be interleaving status messages with function output regardless. Setting the pkgver() status message (the one time we use it in a subshell) separately also makes it safe to change whether message.sh functions write to stdout or stderr. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29makepkg: fix pkgver() function not aborting on errorsEli Schwartz
`run_function_safe pkgver` is evaluated in a subshell and therefore does not abort when it should. Explicitly check the return outside of the subshell and abort if necessary. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-29makepkg: don't save the same shopts twiceEli Schwartz
Both run_function and run_function_safe will save and restore `shopt -p` but the former is only called from the latter. It makes sense to save this as part of a "safe" runner, so let's just do it in one place, there where we save and restore everything else too. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts: pass on options such as set -x to child processesEli Schwartz
When re-running makepkg for fakeroot, if `bash -x makepkg` was used this is lost. Fix by encoding the current set of options explicitly in the invocation, both for makepkg and for the wrapper used to test scripts inside the source tree. Also change to use ${BASH_SOURCE[0]} instead of $0 as the latter can be anything the parent process wants, while the former is explicitly set by bash itself to the filepath of the script. See http://mywiki.wooledge.org/BashFAQ/028 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts: Remove trailing semicolonsJan Alexander Steffens (heftig)
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg/util/option: Refactor checking to reduce code duplicationJan Alexander Steffens (heftig)
Pull out the expected=y/n check into a separate function and make use of the fact we can just prepend the fallback arrays to get the same result. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg/util: use parameter transformation when checking variable typeEli Schwartz
Now that we require bash 4.4 this is "more correct" than analyzing the output of declare -p to see if it compares favorably with -a. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: when signing packages, report package filename on failureEli Schwartz
In commit c6b04c04653ba9933fe978829148312e412a9ea7 the signing function was moved out of fakeroot, and thus out of the create_package loop. This meant that if package signing failed, it was no longer possible to tell which package it failed on by checking which package creation is currently running. Successful signing attempts do not have this problem as we already printed the name of the signature file. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10libmakepkg: add pkgbase to linted variablesmorganamilo
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: Simplify run_packageJan Alexander Steffens (heftig)
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10makepkg: Simplify SPLITPKG checkJan Alexander Steffens (heftig)
This causes package_$pkgname() to be preferred over package() in the non-split case, but the behavior if both functions exist was undocumented anyway. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10Add lz4 compression support to makepkgAlex Butler
Adds opt-in lz4 compression of *pkg.tar files with makepkg. This is nice to have as an option for very fast compression and is already installed with libarchive. Signed-off-by: Alex Butler<alexheretic@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-08-10scripts/completion: derive the bash completion directory from pkg-configEli Schwartz
Default to the standard completionsdir, which is lazy-loaded, rather than hardcoding the compatdir which is not. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg: optimize and fix BUILDINFO generation's use of awkEli Schwartz
The biggest issue is directly supplying the data within the format string which can result in misinterpreting formatter sequences if a printed variable contains an "%" in it. This character is currently permitted in the pkgver field, though not in the pkgname. Also pacman/libalpm itself has much looser limitations and this can appear anywhere at all if a package was created by some other program. For the package "iambroke-1%s-1-any.pkg.tar.xz", installed in the build environment, the result is: -> Generating .BUILDINFO file... awk: cmd. line:3: (FILENAME=- FNR=1085) fatal: not enough arguments to satisfy format string `-1%s-1' ^ ran out for this one Followed by a .BUILDINFO which contains an LC_ALL=C sorted list of $pkgname-${epoch:+$epoch:}$pkgver-$pkgrel-$arch ending in: installed = iambroke Which is cut short, then fails to list the succeeding packages. The package itself successfully builds. It's also unnecessary to save the output of pacman -Qq in order to get the information for pacman -Qi, since the latter will, just like the former, return information for all installed packages if not given a package name(s). While I am at it, pipe this directly to awk rather than keeping a copy in an unnecessary local variable. This is slightly more efficient in addition to preventing the <<< herestring from re-interpreting the content of "$pkginfos" in ways that don't really matter for our usage. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27Pull updated translations from TransifexAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-27makepkg: reduce strictness of pkgver in depends lintingEli Schwartz
This change was introduced to prevent entries like depends=('foo>'). However, it had the unintended side effect of causing a number of working PKGBUILDs to fail to build. This happened when a PKGBUILD defined one variable through calling a "complex" statement within the PKGBUILD's package function (e.g. a function or evaluating in a subshell), then used it to define the package metadata variable. extract_function_variable() cannot execute the package function in order to retrieve this information, so it performs a simple grep + eval instead and in the process misses the contextual awareness of running within the package function. While not catching these "issues" can result in incorrect SRCINFO, the resulting packages are fine. Stop aborting on the common case where the pkgver of a dependency is dynamically set during the package function until the large number of broken PKGBUILDs are fixed, and the restrictions of the PKGBUILD format are documented. "Fixes" FS#58776 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-19libmakepkg: remove accidentally added fileAllan McRae
A blank file slipped into libmakepkg in commit 2c94118d. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-19libmakepkg/tidy: fix debug sources not being properly detected sometimesEli Schwartz
DW_AT_comp_dir is meant to contain the directory in which the compiler was run DW_AT_name contains the source file the compiler was told to use. In the event that DW_AT_name is an absolute path, it is (obviously) not meant to be computed relative to DW_AT_comp_dir. However, we did not handle this correctly, and as a result tried to copy source files using doubled-up filepaths. The correct approach should be to use DW_AT_name on its own, in the event that it is an absolute path. See http://wiki.dwarfstd.org/index.php?title=Best_Practices. This fixes debug package generation for many packages that use absolute paths in their build systems... like CMake. Reported-by: Jagannathan Tiruvallur Eachambadi <jagannathante@gmail.com> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-07-19Revert "makepkg: use the `declare` builtin when backing up variables to eval"Allan McRae
This reverts commit 9e52a36794552b77ecf26f7f34b226d096978f1e. The change to use declare for the split package metadata backup/restore resulted in variables being declared at a local scope. When these variables were unset (mostly noticed with debug packaging) this left the variable at global scope defined. Revert back to the known good state. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: don't print per-pkgname debug packagesEli Schwartz
In commit 9a4d61622066d5d30c649f1c958b26526a4ceddf debug packages were merged into one exclusive pkgbase-debug, but the print_all_package_names function did not get updated to match this logic. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18Fix signing of debug packagesAllan McRae
Commit 9c8d7a80 broke the signing of debug packages by merging code up but not changing the test condition. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: fix initialization when extracting arraysDave Reisner
Assuming that everything is a string leads to code which is effectively: a= a+=('bar') This creates an array with 2 elements instead of one. Using proper array initialization fixes this. https://lists.archlinux.org/pipermail/pacman-dev/2018-June/022591.html Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18Add missing sha224 sums in man page and lintingmorganamilo
Signed-off-by: morganamilo <morganamilo@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: fix erroneous $BUILDDIR when $startdir is not an absolute pathEli Schwartz
When comparing the $BUILDDIR to the $startdir, we used string equality instead of testing whether they are the same location, and ended up appending $pkgbase even though there's no reason to use it here. In some cases, this could result in makepkg erroring when trying to create $srcdir/$pkgdir, if a file with the same name as the $pkgbase exists. This is expected behavior if a file "src" or "pkg" exists, but decidedly less so for $pkgbase. This could be fixed either by setting $startdir to an absolute path, or by ensuring the test checks this directly; I've chosen to do both, since the test should really be correctly checking the thing it actually cares about, but since we ensure absolute paths are used everywhere else, this might bite us elsewhere someday. It's also more consistent. Fixes FS#58865 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: Don't use parameterless returnJan Alexander Steffens (heftig)
It's especially dangerous in trap handlers since the return value of the function becomes the return value of the last command before the trap, not the last command in the current function. This applies to any function executed in a trap handler, nested functions included. In one case, install_packages failed (via return 14), which was inside a conditional that then ran exit 14, which triggered the EXIT handler, which called clean_up, which called remove_deps, which had !RMDEPS and thus returned. The return value of remove_deps became the return value of install_packages, triggering the ERR handler, which (due to another problem) was still the user function handler, which then printed a misleading error message and overrode the exit code with 4. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: fix the --nocolor option being broken when passed to pacman -UEli Schwartz
In commit 8ff03868a37b1f9c447784ae2fd639a49e426399 PACMAN_OPTS was turned into an array. Unfortunately, that array was generated by treating the "--color never" option as one string, instead of an array of two strings... Fixes FS#58820 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: Clear ERR trap before trying to restore itJan Alexander Steffens (heftig)
$restoretrap is empty if the trap was not set. This caused the trap handler to remain and override later exit codes. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg/lint_pkgbuild: squelch syntax error when a pkgname is emptyEli Schwartz
We fail with an error, but then we also fail with: ==> ERROR: depends is not allowed to be empty. /usr/share/makepkg/lint_pkgbuild/pkgname.sh: line 39: continue: only meaningful in a `for', `while', or `until' loop During the refactor to provide enhanced pkgname=pkgver linting, this was moved out of the ${pkgname[@]} loop to a distinct function, at which time it should have been modified to return rather than continue. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: do not chmod $BUILDDIR itself after checking for its existenceEli Schwartz
In commit d8717a6a9666ec80c8645d190d6f9c7ab73084ac the write permission checks were refactored. Initially we intended to drop this chmod in the process, but due to some confusion about whether it was needed, I ended up submitting patches both to preserve and to remove it... but it's not needed after all. We do it on the individual $srcdir/$pkgdir, later on. Then, we used the wrong version, which causes unnecessary restrictions. See FS#58790 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg/lint_pkgbuild: permit versioned optdependsEli Schwartz
pacman accepts these, and there is no good reason to be more restrictive ourselves; we should follow the example of "depends" here. Update the documentation to actually state that this is supported. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18libmakepkg: when checking for write permissions, handle pre-existing dirsEli Schwartz
Simplifies the function a bit, but mostly, mkdir -p will never fail if the directory exists, and therefore makepkg never checks to see if it is actually writable. On the other hand, it's unnecessary to check if the directory exists once we know mkdir -p succeeded... Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: remove unused variable forgotten when moving to parseoptsEli Schwartz
Reported-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-06-18makepkg: update help text to describe --packagelist's new behaviorEli Schwartz
In commit d8591dd3418d55c5736022ef003891fc03b953e0 when teaching --packagelist to print the full filepath for built arches only, I forgot to update the helptext at the same time as I updated the manpage. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-28Pull updated translations from TransifexAllan McRae
Also remove any translations that are less than 75% complete. These will be readded once translation completion passes our minimum threshold. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-16Fix using run_pacman to invoke -Qi with sudoEli Schwartz
In commit 5698d7b66daa2a0bc99cab7a989cef1c806c3bf6 a new non-root use of pacman was added -- previously we used -T or -Qq, and run_pacman did not know how to special-case -Qi to skip being prepended with sudo. The result is: -> Generating .BUILDINFO file... ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded (cannot open shared object file): ignored. [sudo] password for eschwartz: -> Adding changelog file... Fix this by using a more generic glob since neither -Q nor -T will ever need sudo or PACMAN_OPTS Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-15Pull translations from Transifex and regenerateAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-14Remove all modelines from the projectEli Schwartz
Many of these are pointless (e.g. there is no need to explicitly turn on spellchecking and language dictionaries for the manpages by default). The only useful modelines are the ones enforcing the project coding standards for indentation style (and "maybe" filetype/syntax, but everything except the asciidoc manpages and makepkg.conf is already autodetected), and indent style can be applied more easily with .editorconfig Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg: Support file 5.33's application/x-pie-executableJan Alexander Steffens (heftig)
file 5.33 introduces a new MIME type "application/x-pie-executable", which is used for relocatable binaries. makepkg ignored these binaries and did not attempt to strip them. Handle the new MIME type like the old "application/x-sharedlib". Stripping the binaries with --strip-unneeded to keep relocation information should be the correct thing to do. file 5.33 also misidentifies actual libraries as PIE executables, so we didn't strip any shared libraries, either. We now work around this bug. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12util/pkgbuild: fix broken indentationAndrew Gregory
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12Fix regression that broke repo-add aborting on failuresEli Schwartz
In commit cb0f2bd0385f447e045e2b2aab9ffa55df3c2d8a the changes from commit 81d233b79345d05d5bf17a4b2844085e14f9ee36 seem to have been inadvertently backed out. Right now the current check doesn't do anything, since "fail" is always nothing and therefore successful. Fixes FS#58505 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg/integrity: determine what is a signature preferring local filenameEli Schwartz
Checking the file extension to determine if something is a signature is currently done in three places: - verify_file_signature: uses $file to print status, reuses it for comparison - source_has_signatures: uses $netfile, but removes url component if filename component exists - generate_one_checksum: uses $netfile and fails to detect renamed files This leads to inconsistent behavior when trying to use a signature of the form "foo-1.0.tar.gz.asc::https://example.com/foo-1.0.tar.gz.pgp" Fix this by treating the third case like the second case. Reported-by: Giancarlo Razzolini <grazzolini@archlinux.org> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12bash_completion.in - consider option "-n --native" in operation "-Q --query"Simon Linden
Signed-off-by: Simon Linden <xhi2018@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12Append architecture information to 'installed' elements in .BUILDINFORobin Broda
Adding the architecture to the 'installed' elements of the .BUILDINFO file makes it easier to retrieve the packages needed to reconstruct the build environment. Signed-off-by: Robin Broda <robin@broda.me> Signed-off-by: Allan McRae <allan@archlinux.org>