Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2016-05-18Use a more generic regexp when parsing output of gpg(1) in signature ↵Leonid Isaev
verification. The current way of extracting key trust from output of gpg --verify is not very robust against changes in the format of said output. As a result, pacman-key can return an error even if the signature is actuall good. This change relaxes the regexp when parsing output of gpg. Signed-off-by: Leonid Isaev <leonid.isaev@jila.colorado.edu> Signed-off-by: Allan McRae <allan@archlinux.org> (cherry picked from commit 892a1076c00a2b0097145c35f5d8ef590216dac0)
2016-05-05libmakepkg: ensure emptydir find command acts on individual directoriesAllan McRae
Using "-exec command {} +" systax exits on any error. Such errors occur when running rmdir on a non-empty directory. Switch to "{} ;" syntax instead which avoids exiting before the find command is completed. Fixes FS#48515. Note, we can not use "-empty" in the find command because it is not supported by Busybox find, and the "--ignore-fail-on-non-empty" flag for rmdir is not available on BSD rmdir variants. Signed-off-by: Allan McRae <allan@archlinux.org> (cherry picked from commit baf1ff64e6ea23e93f307480480d87159cd2e487)
2016-02-26libmakepkg: fix is_array functionAllan McRae
This happened to work for the majority of cases because the only calling function used a variable named "i" that was related to the variable being passed to the function. Fixes FS#48340. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-23Regenerate translations for 5.0.1Allan McRae
2016-02-23Pull translation updates from TransifexAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-23makepkg: do not run prepare() with --noextractEvangelos Foutras
This is partial revert of 8454daa7feef (makepkg: run pkgver() and prepare() with --noextract). Reasoning for the reversion (copied from FS#43498): Running prepare() when --noextract is used no longer allows running 'makepkg -o && makepkg -e' with any PKGBUILD that applies patches in prepare(). [1] Sure there's --noprepare which restores the old behavior, but that's a lot of extra typing for what I believe is a much more common use of --noextract. For OP's use case of doing git bisects, you can specify the commit in the source array and thus skip --noextract since makepkg will checkout the correct commit each time. [1] I often extract the sources using 'makepkg -o', manually edit some source files, and then use 'makepkg -e' to package it (while possibly repeating the edit/package steps). Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-21only include .SRCINFO comments in source tarballDominik Fischer
This avoids introducing unnecessary changes to the time stamp into package repositories that regularly use --printsrcinfo to update the .SRCINFO file. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20makepkg: remove pkg from OPT_LONG arrayAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20Revert "makepkg: Empty/create only $pkgdir's relevant to current PKGBUILD"Allan McRae
This reverts commit f9423cfa5d5b9f2041b70676438082faad1cd1ee. This created issue when building packages with debug info multiple times. It could be fixed, but it confirmed my initial opinion that keeping other directories in $pkgdirbase was wrong. Use different BUILDDIRs if you want to build different things from a single PKGBUILD.
2016-02-20Make "makepkg -g" ignore the current architecture.Alastair Hughes
Commit 663c74150ab4ba6d3adc55b0e3f539557a16e352 (makepkg: merge arch dependent variables after PKGBUILD linting) broke "makepkg -g" on a PKGBUILD which did not include the current architecture, by moving the lint_pkgbuild call before GENINTEG was processed. Fix that by setting IGNOREARCH for the "-g" option. Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20libmakepkg: increase robustness of the detection of array variablesAllan McRae
Extract array detection into its own utility function that ensures extglob is enabled. Suggested-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-02-20repo-remove: fix checking for non-existent .db databaseAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-30Update translationsAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-25makepkg: do not run prepare() and pkgver() with --repackageAllan McRae
Bug introduced with commit 8454daa7. Reported-by: Zuyi Hu <hzy068808@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-25Fix testing of arrays status for arch specific variablesZuyi Hu
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-17Pull translations updates from TransifexAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Update copyright years for 2016Allan McRae
make update-copyright OLD=2015 NEW=2016 Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15makepkg: Output full URL in case of download failureFlorian Pritz
Most entries in $sources contain variables so finding out why a URL fails to download is hard because one has to manually replace the variables when looking at the PKGBUILD. Simply output the full URL here so that it can be easily seen what is wrong. Old: ==> ERROR: Failure while downloading example-1.2.4.tar.gz New: ==> ERROR: Failure while downloading http://example.org/releases/1.1/example-1.2.4.tar.gz With the new format it is much more obvious that the directory name is the culprint (1.1 vs 1.2) while the old one would not display that information. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15makepkg: run pkgver() and prepare() with --noextractAllan McRae
Modifications made to the source before running with --noextract may alter the version string returned by pkgver(). Always run this function if present and check build status before proceeding. Fixes FS#46800. Also run prepare() when --noextract is used (unless --noprepare is specified). Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-09Pull translations from Transifex and prepare for next releaseAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06makepkg: record build information in .BUILDINFOAllan McRae
This information can be used to reproduce build conditions, which can then be used to determine if a package builds reproducibly. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06makepkg: add whirlpool to the list of hashing algorithmsLuke
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild/variable: increase robustnessAllan McRae
Approach the detection of variables of the wrong type using an approach similar to that used for construction of .SRCINFO files. While doing silly things in bash could still result in false negatives, this approach should be very robust to generatinf false positives results. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: merge arch dependent variables after PKGBUILD lintingAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: remove obsolete commentAllan McRae
Behaviour changed in commit dce82f9d. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild: explicitly return valueAllan McRae
Set the return value to be local and always explictly returns it. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-05Refactor lint_source to work with earlier versions of BashAaron Campbell
Negative subscripts to indexed arrays are not supported before 4.2. However, since substring expansion works on arrays, we can specify an offset of -1 to be taken relative to one greater than the maximum index of the specified array (see Parameter Expansion section of the bash man page). This works with both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman. Signed-off-by: Aaron Campbell <aaron@monkey.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28scripts/po: fix translated file nameAllan McRae
This file was renamed during review and its entry in POTFILES.in was not updated. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-28makepkg: fix $pkgname element duplicationBenjamin Yates
run_split_packaging did not preserve the $pkgname array correctly, and would create duplicate entries in the list during restore. After restoring the backup (a b c) would become (a b c b c). This probably went unnoticed because during --install, pacman would reconcile the duplicates. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-27libmakepkg: fix pkgver checkingAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-22makepkg: Fix hard-coded debug suffixMohammad Alsaleh
Signed-off-by: Mohammad Alsaleh <CE.Mohammad.AlSaleh@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: Set CCACHE_BASEDIR to make paths in $srcdir relativeJan Alexander Steffens (heftig)
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: Correctly layer distcc and ccacheJan Alexander Steffens (heftig)
ccache expects further compiler wrappers to be specified via CCACHE_PREFIX. Otherwise, ccache will hash the wrapper executable instead of the real one. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19libmakepkg: Add check_buildoption for distcc and ccacheJan Alexander Steffens (heftig)
makepkg used to check OPTIONS too, which could override BUILDENV. Implement a new function that handles these options more like OPTIONS. This also reduces code duplication a bit. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19makepkg: separate "sourcefile" into two wordsAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-10-19Remove space before ellipsesAllan McRae
Makes all use of ellipses consistent... Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-23makepkg: remove ability to build individual packagesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: remove declaration of unused local variablesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: return 1 on error in arch arrayAllan McRae
The return value was being assigned when an error was found in a PKGBUILD's arch array but it never was returned. Also remove error message explaining about adding the arch array to a PKGBUILD. That was added a long time ago when the arch array first became compulsory. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22libmakepkg: update .gitignoreAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-22makepkg: remove FORCE_VER variableAllan McRae
This variable is no longer in VCS building. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: check if PKGBUILD variables are arrays or not as appropriateAllan McRae
When extracting variables from PKGBUILD (e.g. for .SRCINFO creation) we make assumptions about whether variables are arrays or not. This adds a check to the PKGBUILD linter to ensure variables are arrays or not as appropriate. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-09-07libmakepkg: util/pkgbuild.sh needs processing on buildAllan McRae
pkgbuild.sh contained @DEBUGSUFFIX@ and so needs to be run through the sed command on build. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-08-08Remove ko_KR translationAllan McRae
The "ko_KR" locale is the same as the "ko" locale. Remove the "ko_KR" variant as it is incomplete and has been superseded by "ko" on transifex. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20libmakepkg: move color settings to functionAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20dont remove x bit when marking pkgdir RODave Reisner
f170a94c137d355 potentially causes $pkgdirbase/$pkg to be undeleteable with -R or -C if a previous build was interrupted. We simply can't traverse to this directory, and rm blows up. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-07-20libmakepkg: lint_package requires cd_safeAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-06-20repo-add: Reject armored signaturesJohannes Löthberg
Pacman cannot handle armored signatures, so make repo-add error out if one is detected. Signed-off-by: Johannes Löthberg <johannes@kyriasis.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-06-20makepkg: Add flag for printing SRCINFO to stdoutJohannes Löthberg
This commit adds a makepkg option to generate and print the SRCINFO file for a PKGBUILD, required by the new AUR, to stdout. AUR 4.0 will use Git instead of source tarballs for uploading packages, so making makepkg capable of printing the SRCINFO would simplify package management, instead of having to extract it from a source tarball. It is also useful for scripting other things, so that instead of having to parse PKGBUILDs, one can make makepkg generate the SRCINFO and then you can parse that instead, which is much simpler and less error-prone. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-06-20repo-add: Generate unarmored DB signatureJohannes Löthberg
Pacman cannot handle armored signatures, so use gpg's --no-armor flag to force an unarmored signature. Signed-off-by: Allan McRae <allan@archlinux.org>