Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/scripts
AgeCommit message (Collapse)Author
2018-05-12libmakepkg: don't save/set/restore extglob in bash [[ testsEli Schwartz
Since bash 4.1 extglobs can be used within [[ ... ]] regardless of whether the shopt is set. Our configure.ac requires bash 4.1.0 at a minimum for pacman scripts. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg: only save the shellopts we needEli Schwartz
micro-optimization: We only care about temporarily enforcing extglob, so that is the only one we need to explicitly restore. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12libmakepkg/lint_pkgbuild: fix regression in linting ↵Eli Schwartz
depends=(foo=$epoch:$pkgver-$pkgrel) In commit 91b72cc386ca03241791748da5da2b150c724ace support was added for linting depends/etc. to ensure they contain only valid dependency specifiers. However it did not properly take into account the possibility of dependencies linked to a specific pkgrel or epoch, which promptly failed to build because "-" and ":" is not allowed in a pkgver. pkgrel is something supported by pacman and useful for e.g. split packages which cannot be mismatched even if the pkgver is the same. Fix by removing an optional suffixed "-$decimal" when checking for a valid pkgver. epoch is kind of difficult to do without :D so likewise fix by removing an optional prefixed "$integer:" Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-05-12remove unneeded break argument from option parsingRafael Ascensão
Some scripts are using `break 2` to break out of the option parsing loop. Since a single `break` is sufficient in these cases, remove the extra argument. Signed-off-by: Rafael Ascensão <rafa.almas@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-30makepkg: Fix listing of uninstalled depsAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29Initial translation preparation for pacman-5.1Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29Import updated translations from TransifexAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29Update POTFILES.inAllan McRae
Add all files to the relevant POTFILES.in. This avoids missing translations added to old files. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libmakepkg/lint_pkgbuild: lint depends/etc. as if they are pkgnameEli Schwartz
depends, provides, conflicts, replaces, and other variables that are meant to contain package names, are now checked to ensure 1) the name component contains only characters that would equate to a valid pkgname. 2) the version component contains only characters that would equate to a valid pkgver. 3) comparison operator is a valid comparison operator (e.g. provides only allows exact = while optdepends doesn't allow anything) This also refactors pkgname into a shared utility function, wires up pkgbase optdepends and provides to use it, and gives pkgver a touchup to allow referencing where it was called from. Fixes FS#57833 and a bit of extra. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-04-29libmakepkg/util/pkgbuild.sh: fix missing extglobEli Schwartz
We use an extended glob here, but were relying on having it globally set in makepkg. This causes it to fail when used in scripts. Since scripts using libmakepkg may not want extglob to be set, save and restore the environment while explicitly setting extglob only where we need it. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-18makepkg --packagelist: fix listing debug packages with makepkg.confEli Schwartz
print_all_package_names used in_opt_array to check whether or not the PKGBUILD itself has options=('debug' 'split') -- while checking to see if it was enabled per split package which doesn't make sense as these options apply globally. This prevented debug packages from being listed if enabled via makepkg.conf rather than per PKGBUILD. Instead, use check_option to determine whether makepkg actually thinks it is meant to try creating a split debug package. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15makepkg: use the `declare` builtin when backing up variables to evalEli Schwartz
Rather than manually crafting foo_backup in a loop and eval'ing them with a complicated escape pattern, store every splitpkg_overrides element into a single variable via the eval-friendly `declare` builtin. An alternative to eval would be using `printf -v` but this does not work for arrays. This has the additional benefit of reducing the number of variables/arrays floating around in the environment. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15libmakepkg: Add basic rules to lint makepkg.conf variablesEli Schwartz
Currently the only things we check are: - Things that should be arrays, are not strings, and vice versa (this was mostly copy-pasted from the similar code in lint_pkgbuild). - Variables that are meant to contain pathname components cannot contain a newline character, because newline characters in pathnames are weird and also don't play well with future changes intended for the --packagelist option. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15libmakepkg/integrity: fix regression that broke --installEli Schwartz
In commit c6b04c04653ba9933fe978829148312e412a9ea7 package signing was moved out of fakeroot, and as part of this process, the global pkgname variable was modified in order to extract the built package names. However, if a debug package was not available and added to the list of packages, the function was aborted early, before the pkgname array was restored, thereby corrupting the later stages of makepkg and specifically the install_package function which needs to know which pkgnames to install. Fix this by inlining the debug package signing inside the `if` check, and as added security switch to using `for pkg in "${pkgname[@]}"` as is done in many other parts of makepkg, since package signing does not depend on the value of pkgname for anything. Additionally, since debug packages may not actually exist, check if the package file exists first. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-15makepkg: avoid false "Signing package(s)" msg when signing is disabledEli Schwartz
Followup on c6b04c04653ba9933fe978829148312e412a9ea7 which refactored the signing function to run outside of fakeroot, and in the process moved the status message to outside the $SIGNPKG check. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg: refactor checking for write permissions into a utility functionEli Schwartz
Additionally provide a separate error for failure to create the directory vs lack of write permissions on a pre-existing directory. This also means we now consistently try to create any nonexistent *DEST directories as needed before aborting with E_FS_PERMISSIONS. Previously only $BUILDDIR received that kindness. Fixes FS#43537 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14Added gpg-agent.conf to disable the gnupg scdaemonEric Renfro via pacman-dev
This fixes an issue where smartcards, such a Yubikey, would cause the keyring to fail locally signing, thus also failing to verify signed packages. Signed-off-by: Eric Renfro <psi-jack@linux-help.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14Update coyrights for 2018Allan McRae
make update-copyright OLD=2017 NEW=201 Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg: set umask 0022 again after syncing depsFelix Glaser
makepkg configures the umask 0022 as a sane default for building packages. After installing dependencies, it sources `/etc/profile` again. If the user configured a umask other than Arch's default of 0022 (or 022) in `/etc/profile`, this sane default is now gone and needs to be set again. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14Fix linting of whitespace in pkgverRikard Falkeborn
In order to detect if pkgver contains whitespace, we need to quote it. Previously, only the characters up to the first whitespace was checked. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg: use localized date stringsYen Chi Hsuan
Before this change, LC_TIME=zh_TW.UTF-8 makepkg has the following line: ==> Making package: foobar 1-1 (日 2月 11 01:13:42 CST 2018) With this patch, this line becomes: ==> Making package: foobar 1-1 (西元2018年02月11日 (週日) 01時13分57秒) The latter is more natural for a Chinese native speaker. Signed-off-by: Chih-Hsuan Yen <yan12125@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-03-14makepkg --packagelist: just list the built package files we will buildEli Schwartz
Currently this seems to be only theoretically useful. The most likely reason for wanting a packagelist is in order to script makepkg and derive the filenames for the packages we want to install or repo-add, but in the current implementation this requires a lot of additional post-processing which must be duplicated in every utility to wrap makepkg. - It is of minimal use to know what packages might get created on some other device utilizing a different CPU/OS architecture, so don't list them. - It is non-trivial to reimplement makepkg's logic for sourcing any of several makepkg.conf configuration files, then applying environment overrides in order to get the PKGDEST and PKGEXT, so include them directly in the returned filenames. - Output is delimited by newlines, for readability. For maximum parsing reliability, libmakepkg needs to learn how to lint the PKGDEST and PKGEXT variables to ensure they do not contain newlines, which will be submitted in a separate patch. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-19pacman-key: do not set a default keyserverEli Schwartz
Recent versions of GnuPG are perfectly capable of using sane defaults, and the default SKS keyserver over hkps:// is better than hardcoding the same keyserver over hkp:// anyway. Fixes FS#55278 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-19Fix usage of install_packageEli Schwartz
In commit ab2be5794de8a57426ec3fc0f631cc766a0b8227 return codes were implemented, and the output of install_package was improperly assigned to a variable when the return code was wanted. All we need to do is restore the previous exit handling, but return $? instead of hardcoding "0". Reported-by: xftroxgpx <xftroxgpx@protonmail.com> Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-19use pacman-conf in bash completionJoel Teichroeb
Signed-off-by: Joel Teichroeb <joel@teichroeb.net> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-19use pacman-conf in scriptsAndrew Gregory
Because parsing pacman.conf is so difficult that even we can't do it right. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-10Fix moving source files into debug packagesAllan McRae
Commit 8bec63bf92d8dd028aa88dbd5109c314cdb9ebea attempted to switch to using -fdebug-prefix-map to set file locations in debug packages. It make a few mistakes... 1) Adding debug C{,XX}FLAGS only worked if DBGSRCDIR was defined in makepkg.conf. Fix this by falling back to the default value. 2) Using -fdebug-prefix-map altered a lot of assumptions about file locations when copying source files into debug packages. This resulted in lots of messages of failed cp in packaging output. Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-06libmakepkg/integrity: fix git signatures not seen with multiple filesEli Schwartz
In eaa82b4d0775252856a4e54a6f2a9ea191cf0b8f source_has_signature() was modified to check if git repositories are marked as signed. However, due to a typo the unused variable $netfile was checked. This worked as long as the last source element was marked as signed, due to $netfile being mistakenly set as a global in check_vcs_software(), but usually failed with multiple sources. Break this more consistently by properly declaring $netfile as a local variable in check_vcs_software() which it should be regardless. Fix it again by completely moving over to $netfile in source_has_signature() as netfile is more descriptive of the current state. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2018-01-06libmakepkg/integrity: fix regression that broke invalid file sigsEli Schwartz
In 42e7020281d3ae260e1e9693495f527b7f476625 creating the gpg statusfile for a source file was split into a separate function, which used the return code to indicate unsigned files and proto-specific errors. However, the fallback return code was set by the final gpg invocation, which would be 1 if the signature was somehow broken (for example, the key was not available in the gpg keyring). As a result makepkg thought that file did not have a signature and skipped over it rather than erroring out. Fix this by explicitly setting the return code for all verify_*_signature() functions. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: tell the compiler to record debugging info for debug packagesEli Schwartz
In commit 8b0d59b83a60eb504567590346119fe4cd891cad support was added for storing the source files of binaries in debug packages. This made use of the debugedit program which is part of the RPM package manager, which is not very standalone. The same effect can be achieved using -fdebug-prefix-map, an option accepted by both the gcc and clang compilers which modifies how the compiler itself stores the references to the source files rather than requiring us to later edit the produced binaries. This also removes the dependency on external programs like debugedit. As a result of this change, source files will only be effectively added for programs which actually use the exported CFLAGS. This is a reasonable tradeoff as we expect our CFLAGS to be used rather than ignored. Upstream software which do not produce useful debug packages are expected to fix their build systems to respect the environment CFLAGS. As a result of this change, the routine for extracting source filenames from binaries had to be modified to derive the source file from the final debug location, rather than the other way around. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: Add a config option to specify the location of debug sourcesEli Schwartz
In commit 8b0d59b83a60eb504567590346119fe4cd891cad support was added for storing the source files of binaries in debug packages. Allow the user to specify where those source files should be stored via makepkg.conf Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: refactor archive compression for reusabilityEli Schwartz
This allows for more easily extending the list of allowed compression methods, as it has to be modified in only one place. Also allow the user to specify their own preferred command + options for source packages in addition to compiled packages. Currently, makepkg.conf(5) erroneously claims this is already possible.
2017-12-07libmakepkg: fix .gitignore to simply ignore all generated .sh filesEli Schwartz
Prior to commit aca153bfa6b1bcd828f0b35db453bb9fea6a08bf some .sh files were not generated and simply included directly, and it was necessary to explicitly iterate all ignored files to prevent git from ignoring the directly-included files. However, now all .sh files are in fact generated so it makes no sense to list each one separately in the .gitignore file. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: reorganize the restoration of settings by precedenceEli Schwartz
The extra variables on the commandline were inconsistently applied. They should override anything else, instead, most were overridden by environment variables with the exception of BUILDDIR (and this was not sanity-checked to see if it had write permissions). e.g. given the commandline: `PKGDEST="$(pwd)"` BUILDDIR="$(pwd)" makepkg PKGDEST=/doesnt/exist BUILDDIR=/doesnt/exist` We would incorrectly use the current working directory for PKGDEST. Meanwhile, we checked the wrong directory for BUILDDIR, and later errored when we tried to create $srcdir inside the non-writable directory "/doesnt/exist". In order to fix this, use the preferred bash builtin for saving variable definitions, similar to how we restore traps etc. rather than tediously redefining each one by hand, and restore this immediately after makepkg.conf is sourced. Finally, the `make`-style commandline overrides are applied. Also canonicalize_path is applied only on the final paths we try to use. While it is unlikely the value in makepkg.conf will be a relative path, since we now properly respect commandline overrides, they should be canonicalized as well. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: implement error codesIvy Foster
For your convenience, makepkg now has 16 distinct ways to fail. Also closes FS#54204. Signed-off-by: Ivy Foster <iff@escondida.tk> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-12-07makepkg: clarify error when user passes -FIvy Foster
Signed-off-by: Allan McRae <allan@archlinux.org>
2017-10-17libmakepkg: only output package file names when checking for build referencesAllan McRae
The leading directory is distraction from identifying the files containing build references. Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-14Make the flags used for sed -i configurableAlastair Hughes
Not all sed implementations on linux accept the --follow-symlinks argument, so let the user configure the arguments passed to sed if required. Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> [Allan: fixed configure summary output] Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-14libmakepkg: grammar fixAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-13makepkg: respect $SOURCE_DATE_EPOCH to activate reproducible buildsEli Schwartz
If SOURCE_DATE_EPOCH is set, `touch` all source files between the (optional) prepare() and build() functions to unify the modification times. This works around build systems and compilers that embed the file modification times into the file contents of release artifacts. Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-09-13libmakepkg: check for invalid tags in gitEli Schwartz
As per https://lists.archlinux.org/pipermail/arch-general/2017-July/043876.html git doesn't check that the tag name matches what an annotated tag object *thinks* it should be called. This is a bit of a theoretical attack and some would argue that we should always use commits since upstream can legitimately change a tag, but nevertheless this can result in a downgrade attack if the git download transport was manipulated or the upstream repository hacked. So, check the tag blob to make sure the tag actually matches the name we used for `git checkout`. This really should be fixed in git itself, rather than forcing all downstream users of git verify-tag to implement their own checks, but the git developers disagree, see the discussion surrounding https://public-inbox.org/git/xmqqk2hzldx8.fsf@gitster.mtv.corp.google.com/ Signed-off-by: Eli Schwartz <eschwartz@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06makepkg: add more information to .BUILDINFOLevente Polyak
The .BUILDINFO file should retain all the information needed to reproducibly build a package. Add some extra information to the file and also provide a version number to keep track of future changes. Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06makepkg: set default value for PACKAGERAllan McRae
In write_pkginfo, we checked if $PACKAGER was undefined, and gave a default value if not. Just do this upfront to simplify this function. Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06makepkg: always write pkgbaseAllan McRae
There is little savings in only writing pkgbase when different to pkgname, and it makes determining the pkgbase by parsing .PKGINFO slightly easier. Lets just write it... Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06makepkg: do not write baseverAllan McRae
Since 8a02abcf19, this attribute will never exist. Remove check to write it. Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06libmakepkg: Fix improperly spelled local variable declarationEli Schwartz
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06libmakepkg/integrity: Fix error message not sent to stderrEli Schwartz
Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-07-06libmakepkg: fix unsanitized source filenamesEli Schwartz
There were a couple places where filenames beginning with "-" were not properly guarded against by passing them after "--". Some PKGBUILD authors are crazy, but we still take those into account. Signed-off-by: Eli Schwartz <eschwartz93@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2017-05-16makepkg: introduce SOURCE_DATE_EPOCHAllan McRae
This patch introduces the SOURCE_DATE_EPOCH environmental variable. All files in a package are adjusted to have their modification dates set to the value of SOURCE_DATE_EPOCH, which defaults to "date +%s". Setting this variable allows a package that is built twice in the same environment to be (potentially) reproducible in that the checksum of the generated package file will be the same. Also adjust the compression of the mtree file to avoid gzip embedding a timestamp. Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
2017-05-16makepkg: remove build date from .PKGINFO headerAllan McRae
This information is duplicated (in less friendly format) in the "builddate" entry and removing it improves reproducible packaging. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Levente Polyak <anthraxx@archlinux.org>