| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This commit:
-- replaces space-based indents with tabs per the coding standards
-- removes extraneous whitespace (e.g. extra spaces between function args)
-- adds missing braces for a one-line if statement
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
|
|
Color enabled by default, use --nocolor to disable colored output.
Signed-off-by: William Giokas <1007380@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The rest of our scripts have been using `openssl dgst` rather than tools
like `md5sum` for some time, so convert this one too. We also make the
following other adjustments:
* Use a `find -print0 | xargs -0` pipeline so paths with spaces and or
newlines don't totally kill us.
* Ensure the files we write out contain only paths relative to the
database root, where we know the filenames should all be sane.
* Remove use of `diff`, this was the only time we used it in scripts and
we can get a cheap substitute by comparing file checksums instead.
* Only touch the local/ part of the database. It makes little sense to
do anything to the sync/ directory anymore as they are compressed
single files that should be regularly written out in full and won't be
fragmented on any sane filesystem.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
contrib/pacsysclean.in
src/pacman/conf.h
|
|
This wonderful/awful little bash shell variable wrecks havoc on `cd`
calls in shell scripts. Unset CDPATH in makepkg where we use `cd` quite
heavily. In pacman-optimize, we can move the change directory logic into
the bsdtar call so we are left with no usages of `cd` in the script.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
scripts/makepkg.sh.in
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This addresses two problems:
1) echo's behavior is inconsistent when dealing with flags, and can
potentially be problematic.
$ echo -n
$ echo -- -n
-- -n
2) Always using the end of options markers prevents translated strings
from throwing errors, as shown in FS#28069.
The remaining "inconsistencies" are because printf is being used in a
guaranteed safe manner, e.g.
printf '%s\n' "$(gettext "--this can never break")"
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Replace "/tmp" with "${TMPDIR:-/tmp}" to allow for overriding the
hardcoded path.
Since we only use "/tmp" in conjunction with mktemp(1), we could also
have used "--tmpdir", which is GNU-ish, however (and the BSD counterpart
"-t" has been deprecated in GNU mktemp).
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
vim recognises what type of shell script it's dealing with by looking at
the shebang. If detection fails it falls back to sh which doesn't
support some bash features. Adding a normal, possibly broken, shebang
which gets fixed by the Makefile allows vim to detect bash syntax.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We already use msg() and error() in here, might as well just use the
standard functions. In addition, fix one translated message that would
have printed ERROR twice if anyone ever saw it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
And also default dbpath to the one we may find in pacman.conf.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
BASH is defined when you are actually using bash during configure, which
sucks because it ends up being '/bin/sh', messing up all of our scripts.
Change the name of the variable we use in configure, and also ensure we get
a full path to the executable by using AC_PATH_PROGS rather than
AC_CHECK_PROGS. Finally, change the variable name everywhere we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
FS#16623 suggested this change for makepkg; this patch applies it to the
remaining files in the scripts directory.
Signed-off-by: Cedric Staniewski <cedric@gmx.ca>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch addresses quite a few lingering issues in the pacman-optimize
script. FS#11767 provoked this look-over and the following issues were
noticed and fixed:
* If an alternate dbroot was specified, then the lockfile location was never
updated to reflect it. The lockfile location is now set after all dbpath
initialization.
* The inclusion of a trailing slash on dbroot was problematic and led to the
following command being executed:
bsdtar -xpf /tmp/pacman-optimize.p12Q4vAUWY/pacman-db.tar.gz \
-C /var/lib/pacman/.new/
It is doubtful we meant to create a hidden directory like this below our
database root, only to go and delete it a second later and then
re-extract. Fix the whole thing by ensuring our dbpath has its trailing
slash stripped and then appending it when necessary.
* The DB extraction was performed twice for no real apparent reason. This
opens the door for extraction problems the second time around, leaving you
with no original database to fall back to. Change the behavior so we only
extract once, and then perform a directory shuffle once we verify the
checksums are correct.
* Perform an explicit sync after we drop the new database on the disk. It
should work better this way.
* Tighten up our check for a pacman lockfile and the time we create one.
There is still a possible race condition but the window is shorter.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Address the issue of our scripts not working so great when gettext is not
available. This has come up in multiple bug reports, and is relatively easy
to address by adding a simple check and a stub function if gettext was not
found that simply echos the original message.
Addresses concerns from FS#9214 and FS#9607.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
repo-add, repo-remove:
'bsdtar -c * | ...' doesn't work (you need '-f -'). Code clean up
eliminated this bug.
Removed the multiple checksum support, pacman now only supports MD5, so
there's no need for the database to contain multiple checksums.
Quote all variables containing file/dir names to prevent paths
containing spaces from causing problems.
Add msg, warning and error functions.
General code clean up.
pacman-optimize:
Use a sub-directory in /tmp for working files to make it easier to clean
up at the end.
Add quotes round $@ in die and die_r, otherwise printf can't display the
message correctly.
makepkg:
Disable colour output if stderr is not a tty.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Relatively straightforward fixes (s/tar/bsdtar/g, add hyphens to options).
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It is much easier for translators to deal with paragraphs as strings rather
than by lines. Take all usage and version information and convert it to this
format.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we move the scripts from *.in to *.sh.in and *.py.in, gettext can pull the
required strings to translate a whole lot easier. Do this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|