Age | Commit message (Collapse) | Author |
|
With bash4 as a requirement, we can use mapfile when reading command
output into an array. mapfile has the advantage of using block buffered
I/O rather than line buffered I/O, making it slightly faster for most
jobs.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
get_pkg_arch checked for the arch variable being overridden in the
package_$1() function when used with a package as a parameter.
However, when there was no override, it did not fall back to the
global value.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Instead of creating a subshell for each of these checks (of which there
are many), pass in an expected value and make the check_* function do
the comparison for us, returning 0 (match), 1, (mismatch), or 127 (not
found).
For a measureable benefit, I tested this on a fairly simple package,
perl-term-readkey, and counted the number of clone(2) syscalls to try
and isolate those generated by makepkg itself, rather than the user
defined functions. Results as shown below:
336 before
180 after
So, roughly a 50% reduction, which makes sense given that a single
check_option() call could be up to 3 subprocesses in total.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Also prevent "sudo" and "su" from being translated.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This fixes a lot of checks done by makepkg (e.g. to see if a package
is already built and choosing which package to install). Previously,
if a package had both "i686" and "any" versions, the "i686" one
always took precidence regardless of the value of "arch" in the
PKGBUILD for that package. Fixes FS#27204.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Conflicts:
scripts/repo-add.sh.in
|
|
Avoid letting the error message from parseopts get lost in the usage
output from pacman-key and makepkg (which is already verbose).
|
|
Make this option additive, so that the following two operations are
equivalent:
makepkg --pkg foo --pkg bar
makepkg --pkg foo,bar
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If the PKGBUILD isn't writeable for devel_update, throw a warning
instead of silently ignoring it. Some logical reordering is present in
this patch to reduce the number of nested if's.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
create source_safe() function which temporarily disables extglob and
exits on error.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
It's expected that this will lead to unwanted behavior, and needs
widespread testing. It's desirable to commit this for a few reasons:
- there's no reason we can't do our own error checking for code that we
write.
- it avoids the need for ||true hacks scattered about in the code.
- it makes us immune to upstream changes in exit codes (FS#28248)
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Make these functions more whitespace space by treating newlines as the
element delimiter rather than every form of whitespace.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was a small oversight from 1917c845 which causes makepkg to write
provides entries to the .PKGINFO file improperly, e.g.
provides = systemdlibsystemdudev=999
Add a newline in the printf format to ensure that these are spaced
appropriately.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In preparation for the removal of the global error trap we need a
way to ensure changing directories succeeds. Add a "cd_safe"
wrapper that performs the necessary check.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Also make sure the strings passed to %s in printf are always quoted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use pushd/popd, quote args, handle some more errors
|
|
The case structure allows the syntax to focus on what's actually being
done here.
|
|
|
|
Rather than prioritizing an arbitrary VCS, collect all development
directives. If there is more than one, give a warning and abort.
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/signing.c
lib/libalpm/sync.c
|
|
This reverts commit b264fb9e9ddcc31dc8782390309421965e507383.
With our "fix" of sleeping for BTRFS, we can go back to using `du` to
calculate total installed size.
|
|
This was really only half a fix for FS#28445, as it still doesn't
correctly handle the case of filenames with spaces. In the short term,
there is no obvious fix for this. In the long term, I believe the
correct decision is to rewrite the options parser to be more in line
with GNU getopt_long.
This reverts commits:
ca4142714137b16feabac09c4cda86b0a75036f8.
969dcddbdf9d5dbd91aa414cdd193f3fb26b644b.
|
|
delayed allocation hoses us here and causes erroenous install sizes to
be reported. Add a short sleep to allow the transaction to be committed
to the filesystem and the stat buffers to be updated.
This is apparently a "feature", as per to some of the denizens of #btrfs
on freenode.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/sync.c
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Most places in makepkg deal with full file paths, but a few use the
file name only. Protect from potential issues when a file name
starts with a hyphen.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This means multiple packages can be build using the same BUILDDIR
without their source files all ending up extracted in the same
directory. Fixes FS#28417.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/be_package.c
|
|
Similar to how we manage receipt of SIGINT in pacman's internal
downloader, catch the signal and invoke our own trap handler before
unsetting it and calling the default. This requires a slight
modification to the arguments passed to trap_exit so we can pass the
raised signal to trap_exit (note that we substitue USR1 for ERR since
the latter is unique to bash).
Fixes FS#28491.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Adds the ability to override the commands used to compressing
compiled and source packages. This is useful for those wanting
to use alternative implementations of the compression tools or
non-default compression options.
Allan: documented options in man page
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With multiple items in $libdepends this check only worked for the first
one, everything after this returned an error. This was probably an issue
with \s being treated wrong.
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
libperl.so results in soname="libperl.so.so" which is wrong.
This returns the correct string: "libperl.so"
Fix-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
Conflicts:
contrib/pacsysclean.in
src/pacman/conf.h
|
|
This reworks the implmentation of libprovides for the following
benefits:
- Moves functionality from write_pkginfo() to find_libprovides()
- Only calculates the version for libraries specifically requested
and not all libraries. This has the disadvantage of running find
over the $pkgdir for as many libraries as needed, but is unlikely
to be an issue due to caching.
- The order of the provides array in the PKGBUILD is kept in the
package
- There are more warning messages when things fail and those that
were there are no longer errors (as I do not think failure of
libprovides should result in complete packaging failure)
- It is now modular so can be easy extended to other library types
other than ELF *.so.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Modify parse_options logic to fill an array instead of printing parsed
options. Avoid eval like the plague. Because it is the plague.
Fixes bugs such as FS#28445.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes a problem that occurs if you tell makepkg to remove installed
dependencies (just to be sure) but there are none. As the $ was missing
in front of deplist, the check never happened and 'pacman -Rn' was
called which obviously failed.
Dan: later reported as FS#28448.
Signed-off-by: Christoph Vigano <mail@cvigano.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This wonderful/awful little bash shell variable wrecks havoc on `cd`
calls in shell scripts. Unset CDPATH in makepkg where we use `cd` quite
heavily. In pacman-optimize, we can move the change directory logic into
the bsdtar call so we are left with no usages of `cd` in the script.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/sync.c
src/util/pactree.c
|