| Age | Commit message (Collapse) | Author |
|---|
|
The right-hand side of the [[ ... = ... ]] keyword is an exception to
the general rule that quoting is unnecessary with [[
This is usually not a problem, e.g. in libmakepkg, lint_one_pkgname will
already fail if pkgname has an asterisk, but it certainly doesn't hurt
to be "more proper" and go with the spec; it is more dangerous in
repo-add, which can get caught in an infinite loop instead of safely
asserting there is no package named 'foo*'.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "tip" ref actually signifies the most recently updated branch. hg
does not support a default branch named anything other than "default",
except by creating a "@" bookmark. The correct way to explicitly update
to the default clone ref, is therefore to use one of these, rather than
"tip".
Fixes FS#62092
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
One of the callers was changed to use known_hash_algos, one was not.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 1825bd6716c2a51c92642e8b96beac0101e83805 this was split out
from makepkg, but the warning was not properly migrated; $ext did not
ever exist.
As a result, no matter what you did, the only possible warning was:
==> WARNING: '' is not a valid archive extension.
Fix to filter based on the presence of .tar in the argument, and
building the $ext variable for all checking and messaging purposes
within the function.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to cache sources offline, makepkg creates *two* copies of every
git repo. This is a useful tradeoff for network time, but comes at the
cost of increased disk space.
Normally, git can smooth this over automagically. Whenever possible, git
objects are hardlinked to save space, but this does not work when
SRCDEST and BUILDDIR are on separate filesystems.
When the repo in question is both very large (linux.git for example is
2.2 GB) and crosses filesystem boundaries, this results in a lot of
extra disk space being used; the most likely scenario is where BUILDDIR
is a tmpfs for bonus ouch.
git(1) has a builtin feature which serves this case handily: the
--shared flag will create the info/alternates file instructing git to
not copy or hardlink or create objects/packs at all, but merely look for
them in an external location (that being the source of the clone).
The downside of using shared clones, is that if you modify and drop
commits from the original repo, or simply delete the whole repo
altogether, you break the copy. But we don't care about that here,
because
1) the BUILDDIR copy is meant to be a temporary copy strictly derived
via PKGBUILD syntax from the SRCDEST, and must be able to be
recreated at any time,
2) if the SRCDEST disappears, makepkg will redownload it, thus restoring
the objects needed by the BUILDDIR clone,
3) if the user does non-default things like hacking on the BUILDDIR copy
then deleting and re-cloning the SRCDEST may result in momentary
breakage, but ultimately should be fine -- the unique objects they
created will be stored in the BUILDDIR copy.
While it's theoretically possible that upstream will force-push to
overwrite the base tree from which makepkg is building (which they
should not do), *and* the user deleted their SRCDEST which they should
not do, *and* they saved work in makepkg's working directory which they
should not do either...
... this is an unlikely chain of events for which we should not care.
Using --shared is therefore helpful in immediately useful ways and IMHO
has no actual downsides; we should use it.
An alternative implementation would be to use worktrees. I've rejected
this since it is essentially the same as shared clones, except adding
additional restrictions on the branch namespace, and could potentially
break existing use cases such as manually handling the SRCDEST in order
to share repositories with normal working copies.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
coreutils 8.26 in December 2016 added this new hashing method which is
compatible with the existing md5sum and sha*sum tool usage, while using
the blake2 hash algorithm.
makepkg uses coreutils to provide source file integrity checks via
${integ}sum binaries and it makes sense to offer this as an additional
option.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We cannot use most of the arrays defined in schema.sh as srcinfo is dependent
on the order, but migrate the hashes for now.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Variables such as 'pkgdesc_x86_64' are invalid, instead of ignoring them
raise an error.
This also disallows using 'any' as an architecture specific variable
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
makepkg will now error if disallowed variables are set inside of
the package function.
Disallowed variables are variables that do exist, like 'makedepends'
and 'pkgver' but can not be set inside of a package function.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Refactor many of the different arrays of pkgbuild variables
into scripts/libmakepkg/util/schema.sh.in.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lzip is a lossless data compressor designed to replace gzip and bzip2 as
the standard general-purpose compressed format.
- add .lz (lzip) support to libmakepkg/util/compress.sh:compress_as
- add COMPRESSLZ to makepkg.conf.in
- document COMPRESSLZ
- document PKGEXT with `.tar.lz`
Signed-off-by: Chloe Kudryavtsev <toast@toastin.space>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New verification protocols can
then be added via thirdparty libmakepkg drop-ins without requiring
modifications to verify_signature.sh
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Lookup the existence of matching functions for each protocol, and
fallback on the generic file handler. New source protocols can then be
added via thirdparty libmakepkg drop-ins without requiring modifications
to source.sh
Fixes FS#49076
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
e.g. git+https:// is commonly used for git repositories cloned over
HTTPS, but we assume a proto with a plus in it is actually a protocol
followed by some URI handler. So we might as well simplify the return
value and not have to always add glob matching everywhere when checking
the proto in use.
This is required in order to use the proto directly in function calls,
which will be used in a followup patch.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Making the undescore be translated is probably not something we need
translators to think about.
Additionally, a number of places which use the same text differ only by
the variable being referenced, so simplifying the string means we can
drop a redundant translation.
Bonus: we save a few bytes here and there. \o/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Error if the arch array contains any and any other values. This also
fixes a bug where the check for `$arch == 'any'` which only evaluated
the first value in the array, meaning the rest of the values would not
be linted.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit f7efa6a93d5361af610827d41045d87c7a72f2b5 we added a new file,
and also wired it up to the build systems, but it got added under the
wrong name in meson.build
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use mapfile instead of hacking around read -a with the $IFS.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This can only ever be an int, and the specification states that a
malformed timestamp should be considered a fatal error.
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If you have a malformed pkgrel, the error message says that it must be a
"decimal". That isn't quite true, as that would mean that `1.1 == 1.10`.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
opt)depends/provides/conflicts
Given the depends
depends=('foo>=1.2-1.par2')
and the error message
==> ERROR: pkgver in depends is not allowed to contain colons, forward slashes, hyphens or whitespace.
One would be lead to believe that the problem is that they gave a pkgrel in
depends at all, not that the pkgrel contains letters.
Each of the (check,make,opt)depends, conflicts, and provides linters use a
glob to trim off properly formed epoch an rel from the full version string,
and pass the remainder to check_pkgver(). This does a good job of
accepting/rejecting full versions, but doesn't do a good job of generating
good error messages when rejecting if it's because of the epoch or rel.
1. Factor out check_epoch() and check_pkgrel() from lint_epoch() and
lint_pkgrel(), similarly to check_pkgver().
2. Add a check_fullpkgver() that takes a full [epoch:]ver[-rel] string and
splits it in to epoch/ver/rel, and calls the appropriate check_ function
on each.
3. Use check_fullpkgver() in the {,check,make,opt}depends, conflicts, and
provides linters.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checking the length of the variable to be non-zero before considering it
an error is inconsistent; license=() and depends='' and `declare arch`
should be considered just as wrong.
In fact the current check detects depends='' as non-zero and returns an
error, but happily considers the others to be perfectly okay.
A more reliable check is to simply see if the name has been declared
(whether it is set or not), and then enforce that it's been declared to
the right type.
As an added benefit, avoiding the creation of proxy-evaled variables to
count the number of indexes results in simpler code.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit d8ee8d0c99c3820951e2e49dbdb71a5390bd1dc4 we made use of
fakeroot absolutely mandatory, and disabled a lot of the code which
checked to see if this now-defunct BUILDENV option was set, before
setting up the environment to use fakeroot. Unfortunately, we missed one
spot.
The check_software routine still checked to see if fakeroot was
enabled, but due to the option being removed, thought that it was in
fact disabled, and as a result this check would never run.
Fix by checking to see if we are trying to build either a package or a
source package, and if so, checking for fakeroot. These are the only two
situations where fakeroot is needed.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
directories are created by install_dir within the subdir custom_target
installation targets.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Elsewhere, we return 1 if a library dropin fails, and when running
functions in a loop, we use `|| ret=1` to preserve scope. This ensures
the return value of the function remains useful in isolation. Do the
same thing here as well.
Drop trivial function which wraps a dropin that also uses $ret, since
it's no longer needed.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This opens the door for third parties to provide libmakepkg
extentions for the purpose of altering the build environment.
Signed-off-by: Que Quotion <quequotion@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This opens the door for third parties who provide extensions to
libmakepkg to supply scripts that confirm the presence of their
dependant executables.
Signed-off-by: Que Quotion <quequotion@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Provide both build systems in parallel for now, to ensure that we work
out all the differences between the two. Some time from now, we'll give
up on autotools.
Meson tends to be faster and probably easier to read/maintain. On my
machine, the full meson configure+build+install takes a little under
half as long as a similar autotools-based invocation.
Building with meson is a two step process. First, configure the build:
meson build
Then, compile the project:
ninja -C build
There's some mild differences in functionality between meson and
autotools. specifically:
1) No singular update-po target. meson only generates individual
update-po targets for each textdomain (of which we have 3). To make
this easier, there's a build-aux/update-po script which finds all
update-po targets and runs them.
2) No 'make dist' equivalent. Just run 'git archive' to generate a
suitable tarball for distribution.
|
|
In the spirit of making libmakepkg more useful as a library, and,
critically, *using* that library for additional pacman scripts, we
should include all of output_format.sh and term_colors.sh directly in
libmakepkg and hopefully stop having to embed additional copies in e.g.
repo-add via m4 macros.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This behavior is confusing, since it means absolutely everything goes to
stderr and makepkg itself is a quiet program that produces no expected
output???
The only situation where messages should go to stderr rather than
stdout, is with --geninteg which is meant to return the checksums on
stdout (but we don't want to totally get rid of status messages when
redirecting the results elsewhere, or, worse, redirect status messages
to a PKGBUILD). For this specific case, redirect message output to
stderr in the --geninteg callers directly.
Implements FS#17173
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
[[ ${array[@]} ]] will resolve to false if array only contains empty
strings. This means that values such as "depends=('')" can be inserted
into a pkgbuild and bypass the linting.
This causes makepkg to successfully build the package while pacman
refuses to install it because of the unmet dependency on ''.
Instead check the length of the array.
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
lint_pkgver returns 0 if PKGVERFUNC, since it's likely that update_pkgver()
will change the value of pkgver anyway, and there's no point in linting the
old value. update_pkgver() will call check_pkgver() itself to validate the
new value.
However, that "optimization" only holds if we're definitely going to call
update_pkgver() later; and that's way more complicated than
if (( PKGVERFUNC )); then
it's more like:
if (( !GENINTEG && !PACKAGELIST && !PRINTSRCINFO && !SOURCEONLY && !REPKG && PKGVERFUNC )); then
Which is to say: If I have a PKGBUILD with pkgver():
* if I run `makepkg -g` I expect it to lint pkgver, but it won't
* if I run `makepkg -R` I expect it to lint pkgver, but it won't
* ...
So let's fix that.
Rather than try to keep a huge list of conditions in sync with the flow of
makepkg.sh.in, let's just drop it. As far as I can tell, the only thing
that skipping lint_pkgver() really enables is letting the PKGBUILD author
write `pkgver=` in the initial version, and letting pkgver() fill it in.
They can just start writing `pkgver=0` for that workflow.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We accept package_foo() in non-split packages, because it's easier to
switch to/from a split package just by removing a pkgname element. But
it makes no sense to have both in one PKGBUILD.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Due to a copy-paste error when initially implementing this, it actually
uses a duplicate function name, usually resulting in lint_pkgbuild
overwriting the function definition.
Then the PKGBUILD lint gets run twice, one time before the PKGBUILD is
even sourced -- to potentially surprising results, like erroring out on
a pre-existing shell definition that doesn't match our expectations.
Seen in the wild with lint_config triggering an error for
'declare -x arch="foo"'
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pull out the expected=y/n check into a separate function and make use of
the fact we can just prepend the fallback arrays to get the same result.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now that we require bash 4.4 this is "more correct" than analyzing the
output of declare -p to see if it compares favorably with -a.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit c6b04c04653ba9933fe978829148312e412a9ea7 the signing function
was moved out of fakeroot, and thus out of the create_package loop. This
meant that if package signing failed, it was no longer possible to tell
which package it failed on by checking which package creation is
currently running. Successful signing attempts do not have this problem
as we already printed the name of the signature file.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Adds opt-in lz4 compression of *pkg.tar files with makepkg.
This is nice to have as an option for very fast compression
and is already installed with libarchive.
Signed-off-by: Alex Butler<alexheretic@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This change was introduced to prevent entries like depends=('foo>').
However, it had the unintended side effect of causing a number of
working PKGBUILDs to fail to build. This happened when a PKGBUILD
defined one variable through calling a "complex" statement within the
PKGBUILD's package function (e.g. a function or evaluating in a
subshell), then used it to define the package metadata variable.
extract_function_variable() cannot execute the package function in order
to retrieve this information, so it performs a simple grep + eval instead
and in the process misses the contextual awareness of running within the
package function.
While not catching these "issues" can result in incorrect SRCINFO, the
resulting packages are fine. Stop aborting on the common case where the
pkgver of a dependency is dynamically set during the package function
until the large number of broken PKGBUILDs are fixed, and the
restrictions of the PKGBUILD format are documented.
"Fixes" FS#58776
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
A blank file slipped into libmakepkg in commit 2c94118d.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
DW_AT_comp_dir is meant to contain the directory in which the compiler
was run
DW_AT_name contains the source file the compiler was told to use.
In the event that DW_AT_name is an absolute path, it is (obviously) not
meant to be computed relative to DW_AT_comp_dir. However, we did not
handle this correctly, and as a result tried to copy source files using
doubled-up filepaths.
The correct approach should be to use DW_AT_name on its own, in the
event that it is an absolute path.
See http://wiki.dwarfstd.org/index.php?title=Best_Practices.
This fixes debug package generation for many packages that use absolute
paths in their build systems... like CMake.
Reported-by: Jagannathan Tiruvallur Eachambadi <jagannathante@gmail.com>
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 9a4d61622066d5d30c649f1c958b26526a4ceddf debug packages were
merged into one exclusive pkgbase-debug, but the print_all_package_names
function did not get updated to match this logic.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Commit 9c8d7a80 broke the signing of debug packages by merging code up but
not changing the test condition.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Assuming that everything is a string leads to code which is effectively:
a=
a+=('bar')
This creates an array with 2 elements instead of one. Using proper array
initialization fixes this.
https://lists.archlinux.org/pipermail/pacman-dev/2018-June/022591.html
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: morganamilo <morganamilo@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|