Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/scripts/Makefile.am
AgeCommit message (Collapse)Author
2015-02-01makepkg: split PKGBUILD/makepkg.conf option checking to libmakepkgAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-02-01makepkg: split message functions into libmakepkgAllan McRae
This performs all the needed work for libmakepkg to be included in tarballs, installed into the correct place, and read into makepkg. Also change the install root for libmakepkg to an architecture independant location. Signed-off-by: Allan McRae <allan@archlinux.org>
2014-09-23replace --reference on chmod/chown commandsWolfgang Bumiller
Signed-off-by: Allan McRae <allan@archlinux.org>
2014-09-16pacman-db-upgrade: use pacman-style optionsAndrew Gregory
* convert dbpath from argument to option * add --config and --root options * read dbpath and root from config file * if root is set but not dbpath, dbpath is set relative to root Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2014-05-23Do not check makepkg-wrapper for standard optionsAllan McRae
Fixes "make distcheck". Signed-off-by: Allan McRae <allan@archlinux.org>
2014-03-03Fix install order in scripts MakefileAllan McRae
We need to use install-exec-hook instead of install-data-hook to make sure the hook is run after the installation of the scripts into $BINDIR.
2014-01-28Remove ts and sw from vim modeline when noet is setFlorian Pritz
Forcing vim users to view files with a tabstop of 2 seems really unnecessary when noet is set. I find it much easier to read code with ts=4 and I dislike having to override the modeline by hand. Command run: find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} + Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-10-14makepkg: add LIBRARY variableAllan McRae
This points makepkg to where is library is located. Can be overridden by value in the environment. Signed-off-by: Allan McRae <allan@archlinux.org> [Ashley: Rebased] Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
2013-10-14makepkg: run locally with libtool style wrapperAllan McRae
Build makepkg to scripts/.lib/makepkg and add a wrapper script to call it. This is not useful at the moment, but is the first step to allowing makepkg to be split into smaller pieces. Signed-off-by: Allan McRae <allan@archlinux.org> [Ashley: rebased] Signed-off-by: Ashley Whetter <ashley@awhetter.co.uk>
2013-05-29Add makepkg-templateFlorian Pritz
This allows for somewhat easy templating for PKGBUILDs. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10distribute library/term_colors.shAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-01-03makepkg: use --apparent-size when du supports itAllan McRae
Amazingly, using "sleep 1" to convince btrfs to report correct file sizes is only a 90% fix. Sometimes more sleep is needed. Instead we use the --apparent-size argument to du to get actual file sizes. This is used only on Linux as the various BSDs do not support this argument. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-11-27makepkg: allow debug package suffix to be configurableAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-06-25scripts/library: add size_to_humanDave Reisner
This function is the reverse of human_to_size, and converts integer byte sizes to human readable SI prefixed values. A logical extension of this might be to mimic the formatter that pacman uses and allow a second argument to be passed in which can coerce the size, rather than reducing until the unit count is below 1024. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-06-25scripts/library: add human_to_sizeDave Reisner
This is a bash wrapper around an awk function that parses human readable sizes and returns their representative values in bytes, as a string. A small test harness is added to validate the functionality. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-06-25Portability fixes for makepkgJeremy Huntwork
Allow makepkg to work correctly when used with find from busybox. Fix handling of cross directory symlinks. Signed-off-by: Jeremy Huntwork <jhuntwork@lightcubesolutions.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2012-06-25Create repo-remove symlink in scripts dirAllan McRae
Fix the creation of the repo-remove symlink in the scripts/ dir on building. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-05-20pkgdelta: adopt parseopts for option parsingDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-04-24rankmirrors: move to contrib/Dave Reisner
This script is of questionable value, as it ranks mirrors by an uninteresting attribute: ping. While the script itself is interesting, people should be encouraged to rank mirrors by more useful measures, such as actual speed, locality, or up to date-ness. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-24validate bash scripts with 'bash -n' during build.Dave Reisner
Use the no-exec mode of $(BASH_SHELL) to check for syntax errors in shell scripts. Since we use the extglob feature in various places, this requires that we pass -O extglob to the shell as well, to ensure that the parser is armed to handle this syntax. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-24scripts/library: remove parse_optionsDave Reisner
This is retired, as the two consumers of this function are now using the new parseopts instead. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-24pacman-key: adopt parseopts for option parsingDave Reisner
This requires an ugly amount of reworking of how pacman-key handles options. The change simply to avoid passing keys, files, and directories as arguments to options, but to leave them as arguments to the overall program. This is reasonable since pacman-key limits the user to essentially one operation per invocation (like pacman). Since we now pass around the positional parameters to the various operations, we can add some better sanity checking. Each operation is responsible for testing input and making sure it can operate properly, otherwise it throws an error and exits. The doc is updated to reflect this, and uses similar verbiage as pacman, describing the non-option arguments now passed to pacman-key as targets. Similar to the doc, --help is reorganized to separate operations and options and remove argument tokens from operations. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-24makepkg: adopt parseopts for option parsingDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-24scripts/library: introduce parseoptsDave Reisner
This will replace our current options parser used in pacman-key, makepkg, and ideally elsewhere. It follows heuristics closer to that of GNU getopt long (and thus pacman itself), with the exception that it does not allow for options with optional arguments. Due to the way this parser will be used, this sort of functionality will not be needed. Instead of relying on eval+set, options are normalized into an array, OPTRET, which callers should expect to be populated after returning from parseopts. This avoids problems with quotes and spaces in arguments, assuming that the user quotes properly when passing into the application. A new test harness for parseopts is added in test/scripts. Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-04-07Revert "makepkg: calculate exact total file size"Dan McGee
This reverts commit b264fb9e9ddcc31dc8782390309421965e507383. With our "fix" of sleeping for BTRFS, we can go back to using `du` to calculate total installed size.
2011-12-28makepkg: calculate exact total file sizeAllan McRae
The current calculation of the total file size for a package using "du" suffers from issues in portability and correctness. Especially on btrfs, this can result in clearly wrong package information such as: Download Size : 14684.29 KiB Installed Size : 7628.00 KiB Use an approach based on "stat" to calculate total file size. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Use automake verbose helpers in custom make rulesDan McGee
This converts our script generation to use the built-in AM_V_GEN macro, which honors the V= setting passed to make and allows one to see the full command if they truly desire. The AM_V_at macro is also used in place of an explicit @ so verbose-mode compiles show all commands being run. We can also use these two macros in doc generation to quiet it down to the level we expect. Other minor changes: * a pointless test call is removed in test/pacman/tests/ * sed is used instead of dos2unix as we depend on it anyway * consecutive chmod calls are reduced to a single call (e.g., '+x,a-x') Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-14buildsys: remove existing symlinks before installingDave Reisner
This fixes build errors when performing a manual install straight to a filesystem where the files already exist. Reported-by: Sergej Pupykin <ml@sergej.pp.ru> Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-29pacman-key: rework importing distro/repo provided keyringsAllan McRae
The current --reload option, apart from being non-clear in its naming, is very limited in that only one keyring can be provided. A distribution may want to provide multiple keyrings for various subsets of its organisation or custom repo providers may also want to provide a keyring. This patch adds a --populate option that reads keyrings from (by default) /usr/share/pacman/keyrings. A keyring is named foo.gpg, with optional foo-revoked file providing a list of revoked key ids. These files are required to be signed (detached) by a key trusted by pacman-key, in practice probably by the key that signed the package providing these files. The --populate flag either updates the pacman keyring using all keyrings in the directory or individual keyrings can be specified. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-08-15build-sys: always use $(RM) instead of rm -fDave Reisner
These are equivalent. Use the autoconf macro for consistency. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-15dist: preserve symlinks on installationDave Reisner
This applies to the repo-remove man page as well as the script itself. Yes Dan, I ran distcheck afterwards. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-19pacman-key: add dependency on parse_options to MakefileAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2011-06-30fix vim syntax highlighting of .sh filesFlorian Pritz
vim recognises what type of shell script it's dealing with by looking at the shebang. If detection fails it falls back to sh which doesn't support some bash features. Adding a normal, possibly broken, shebang which gets fixed by the Makefile allows vim to detect bash syntax. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-27pacman-optimize: use output libraryDan McGee
We already use msg() and error() in here, might as well just use the standard functions. In addition, fix one translated message that would have printed ERROR twice if anyone ever saw it. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-27repo-add: add new command, repo-elephantDave Reisner
_ _ / \__/ \_____ / / \ \ `\ ) \''/ ( |\ `\__)/__/'_\ / ` //_|_|~|_|_| ^""'"' ""'"' Signed-off-by: Dave Reisner <d@falconindy.com>
2011-06-23po/: split into scripts/po/ and src/pacman/po/Dan McGee
This is the first step at separating the pacman message catalog and the scripts message catalog. Makefiles, configure.ac, and other such files are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of scripts is also adjusted. Note that no actual pot or po files get changed here; these will get pruned in a future commit so each catalog contains only the necessary messages. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-15Clean up makefile for script generationAllan McRae
We no longer have any python scripts in our scripts/ directory so we can simplify the makefile a bit. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-15scripts: refactor output formatting functionsAllan McRae
Move the common output formatting functions into a separate library file and import that into each script. makepkg is excluded due to its additional color formatting. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-15makepkg: move option parsing code to separate fileAllan McRae
This move the getopt replacement function parse_options out of makepkg.sh.in and into a separate file. The code is inserted into the relevant place in makepkg using m4. This will allow the reuse of the option parsing code in other scripts (i.e. pacman-key) while avoiding code duplication. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-09Fix bracket type in makefileAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-08Fix name of original files in scriptsAllan McRae
Our scripts all currently say: Generated from foo.in; do not edit by hand. Fix this to say foo.sh.in, which is the actual original file name. Signed-off-by: Allan McRae <allan@archlinux.org>
2011-03-23pacman-key: keyring management toolDenis A. AltoƩ Falqueto
The script pacman-key will manage pacman's keyring. It imports, exports, fetches from keyservers, helps in the process of trusting and updates the trust database. Signed-off-by: Denis A. AltoƩ Falqueto <denisfalqueto@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-01-22Makefile: Use git describe --dirty for GIT VERSIONXavier Chantry
dirty indicates if the repo has uncommited changes or not when building, so dont hardcode this info. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add script to update pacman database formatAllan McRae
The pacman-db-upgrade script was added to detect old pacman database formats and upgrade them. Currently performs the merging of depends files into desc files in the local database. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Fix bash shell location checkDan McGee
BASH is defined when you are actually using bash during configure, which sucks because it ends up being '/bin/sh', messing up all of our scripts. Change the name of the variable we use in configure, and also ensure we get a full path to the executable by using AC_PATH_PROGS rather than AC_CHECK_PROGS. Finally, change the variable name everywhere we use it. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Use sysconfdir, localstatedir, BASH instead of hardcoded valuesNezmer
This applies to contrib/ files, our scripts, and the documentation. Dan: fix 'make clean' in contrib/ directory. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Remove DBEXT usageAllan McRae
With commit 5dffef78, the repo database always has a symlink of the form reponame.db. Use that filename and let libarchive determine the compression type. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-30makepkg: try standard paths for coreutils duAllan McRae
Attempt to find "du" from coreutils in the standard paths and if not revert to the version in the users PATH. Using the full path prevents issues such as FS#19932, where a different and incompatible version of du is put earlier in the users path. Signed-off-by: Allan McRae <allan@archlinux.org>
2009-10-11replace rankmirrors by bash cloneXavier Chantry
This removes python optdepends in pacman package This bash clone is a courtesy of Matthew Bruenig <matthewbruenig@gmail.com> Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
2009-04-26makepkg: make in-place sed portableAllan McRae
Do a sed replacement in-place is not very portable. On Mac OSX and BSDs, the syntax is "sed -i ''" where as with GNU sed the command is "sed -i''" or just "sed -i". This patch detects which command should be used during configure. Credit to Kevin Barry who researched this issue and provided a patch to work around this using temporary backup files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>