| Age | Commit message (Collapse) | Author |
|---|
|
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
This test installs three packages with a circular dependency,
to check everything still goes fine in that case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
This replaces the former -D operation that was undocumented and rather
hacky. It can be used with add, upgrade, or sync transactions and will affect
all packages installed. Should close FS #7193.
Also tell makepkg to use this new flag.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The resolvedeps function was a bit negligent, as showed by the sync011 pactest.
Reference :
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008782.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Currently the replaces flag is only used for forcing the replacement
of package (eg because of a renaming) on sysupgrade operation.
If the replaces flag should also be used for resolving conflicts,
then it should be discussed and specified correctly first.
References:
http://bugs.archlinux.org/task/7415#comment17207
http://www.archlinux.org/pipermail/pacman-dev/2007-June/008553.html
commit which introduced the replace flag : 4fcec8f03ff790bfb23b826eee169bc9c0b00142
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
sync022 was added here:
39b654965580bfb7dc0ab72b8c901fbf7729a568
This pactest reverses the installed package to see if it is correctly
picked, in order to test some further changes to this depcheck code that
currently makes sync022 fail.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Another test a bit more complicated for -Rs,
to prevent regression if removedeps is changed.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
This indicates a problem in the current removedeps function
(no version checking) for which Nagy proposed a fix here :
http://www.archlinux.org/pipermail/pacman-dev/2007-June/008539.html
But as he mentioned there, a better fix might be to use the checkdeps
function in the removedeps one.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pactest was sleeping for 3 seconds, which is unnecessary. Reduce it to 1.5
seconds and clean up the code a bit anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add the ability to check the permissions and type of a file within the
framework of pactest. Two new rules can be used:
self.addrule("FILE_TYPE=bin/foo|file")
self.addrule("FILE_MODE=bin/bar|644")
TODO: add the ability to add different types of files (eg links) via the test
package building framework, and add the ability to change the modes on files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Upgrade a package that no longer needs a depend.
Reference:
http://www.archlinux.org/pipermail/pacman-dev/2007-June/008503.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove a package required by another package.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As described in the bug report, installing taglib-rcc (sync900 pactest)
works fine. But installing taglib back (sync901 pactest) doesn't.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Same as remove040, with cascaded remove instead of simple remove.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Most of these new tests deal with provisions upon sync or upgrade being
changed by packages, and pacman not being smart enough to deal with
it yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This change allows us to use all autoconf specified paths, most notably
$(localstatedir). It is quite a change and touches a lot of files, as
all references to the DB and cache were done with the ROOTDIR as a prefix.
* add --lock command-line option to pacman to specify the location of the
lockfile (this can now be specified at configure time by setting the
$localstatedir path).
* Rip quite a few settings out of configure.ac as they are now picked by
setting the paths during configure or make.
* Fix bug with /tmp fallback for sync downloads not working correctly
(related to root location, now the system tmp dir is used).
* Simplified the parameters to some libalpm functions, and added get/set
for the new lockfile option.
* Renamed several of the DEFS to names without the PM_ prefix.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These should test various aspects of the DB when dealing with requiredby
entries. At least one fails without Nagy's alpm_depcmp patch.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
forward-porting some 3.0.2 changes
* Nagy's ldconfig fix
* 3 new pactests to check if ldconfig runs
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Test for duplicate remove targets (should succeed)
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Move all .cvsignore files to .gitignore for switch in VCS. In addition,
delete ones that were unnecessary because they only contained Makefile
and Makefile.am.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Andrew Fyfe <andrew@neptune-one.net>
* Add testing to etc/pacman.d/.cvsignore
* Fix scriptlet001.py test to work during 'make check'.
|
|
* Minor change to utils.py(grep) to make it cleaner
* Added scriptlet check to verify scriptlet events happen
|
|
Giovanni Scafora <linuxmania@gmail.com>
* Added pactest test for -Se operation
James Rosten <seinfeld90@gmail.com>
|
|
* Two new pactest test cases
* Fix some "required by" / "requires" output by unifying all "dependency types"
to a single value (PM_DEP_TYPE_DEPEND)
|
|
reordering and adding ones that were forgotten (noticed when trying to
compile after reordering).
* Updated the HACKING file to include information on #include usage.
* print -> vprint in "making dir" function in pactest.
|
|
|
|
* Added a custom 'mkdir' function which makes parents and doesn't fail on
existence
* Added output for 'SKIP' messages (it did not indicate WHY it was skipped)
* Added the ability to generate DB packages in the sync dir (not the cache dir)
for testing downloading. (self.cachepkgs = False)
* Added pmtest.path for the full path to the package file
|
|
|
|
|
|
allows for the same bit operators to be used across the board on pkg_get
operations.
* Changed name of INFRQ_NONE -> INFRQ_BASE to more clearly reflect what it
does (loads pkg name and version).
* Added a few missing things on package functions, such as SYMEXPORT and
ALPM_LOG_FUNC.
* Slight updates to pmenv to print 'pass' and 'fail' instead of 'passed' and
'failed'. Keeps output a bit more concise.
* Fixed a doxygen comment spelling error. :P
|
|
|
|
requiredby for 'already installed' packages, so the test didn't work
properly. Once these errors were fixed, both tests pass fine.
|
|
about bigger DB changes later, but lets not screw anything up for release.
* Removed some weird uses of "not ... ==" usage in pactest- correct me if I'm
wrong, but isn't "!=" a lot more clean and concise?
* Print description of failed tests in the pactest summary. This could get
dirty with a lot of failed tests though, so watch out.
|
|
for and is a dependency of another package. (upgrade057)
* Removed man2html stuff from doc/Makefile.am.
* Patch: improved depends checking in _alpm_checkdeps
Nagy Gabor <ngaba@petra.hos.u-szeged.hu>
* Slight revisions to pmrule.py to allow for a PKG_PROVIDES test.
* Very quick updates to the pactest README.
* Added rules to some of the newer upgrade tests. Note: upgrade055 now fails
due to requiredby entries not being written packages that are dependencies
in a provides role.
|
|
|
|
deal with. Currently, libalpm with AND without Nagy's patch fails it.
* Slight spacing update to pmenv.py.
|
|
tar: *: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
|
|
* Added the actual "Nagy's bug" as upgrade055.py.
* Updated the Makefile to distribute the pactest readme.
* Removed COPYING from the pactest directory- see COPYING at the root for the
same license.
|
|
.FILELIST
|
|
add the "requiredby" information that libalpm would have written.
Now it succeeds.
|