Age | Commit message (Collapse) | Author |
|
Message updates made this one a bit messy, but nothing too bad.
Conflicts:
lib/libalpm/add.c
lib/libalpm/remove.c
|
|
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_sync(char *target);
-int alpm_trans_add(char *target);
-int alpm_trans_remove(char *target);
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_sync_target(char *target);
+int alpm_sync_dbtarget(char *db, char *target);
+int alpm_add_target(char *target);
+int alpm_remove_target(char *target);
* functions renaming
* add new sync_dbtarget which allows to specify the db
* repo/ syntax handling is moved to frontend
( should implement FS#15141)
* group handling is moved to backend
( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
|
|
This basically started with this change :
/* Transaction */
struct __pmtrans_t {
- pmtranstype_t type;
pmtransflag_t flags;
pmtransstate_t state;
- alpm_list_t *packages; /* list of (pmpkg_t *) */
+ alpm_list_t *add; /* list of (pmpkg_t *) */
+ alpm_list_t *remove; /* list of (pmpkg_t *) */
And then I have to modify all the code accordingly.
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#15546
Also fix the interface of unlink_file which was really stupid..
(alpm_list_t used with only one element)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#15294.
The code to run a command inside a chroot was refactored from the
_alpm_runscriptlet function to _alpm_run_chroot.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
See FS#14642- this allows -Qs output to be fed back into pacman without
problems or having to strip off the 'local/' prefix manually.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The HoldPkg feature is even more important when the packages to be held are
pulled automatically by pacman, in a -Rc and -Rs operation. Before, it only
applied when the packages were explicitly requested by the user to be
removed. This patch extends holdpkg to -Rc and -Rs by doing the HoldPkg
check just before trans_commit.
Additionally, the whole HoldPkg stuff was moved to the front-end.
I changed the default behavior to "don't remove", so I modified remove030.py
pactest as well.
See also: FS#9173.
Original-work-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Pacman currently logs .pacnew warnings to pacman.log but a similar history
of .pacsave warnings isn't kept. The user should be able to search
pacman.log to discover when and where all .pac* files were created by
pacman.
Addresses FS#12531.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These two functions now take directly a package list rather than a database.
checkdbconflicts was renamed to checkconflicts.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Before removing a package from target list (in remove_prepare_keep_needed),
we should check whether we have already removed it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the case of -Rs operation, first pulling the dependencies with
recursedeps before calling checkdeps takes care of the dependency chain of
remove052 pactest.
In the case of -Rcs, we can keep the old behavior because we have no problem
there (any dependency returned by checkdeps will be added to the remove list
because of -Rc) and we have to run recursedeps on the final remove list
anyway to catch all orphans.
Ref.: http://www.archlinux.org/pipermail/pacman-dev/2008-April/011569.html
Signed-off-by: Nagy Gabor <ngaba at bibl.u-szeged.hu>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and
_alpm_grp_cmp
* new alpm_list_remove_str function, used 6 times in handle.c
* remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by
a more general alpm_find_pkg_satisfiers with a cleaner implementation.
before: alpm_db_whatprovides(db, targ)
after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ)
* remove satisfycmp and replace alpm_list_find + satisfycmp usage by
_alpm_find_dep_satisfiers.
before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp)
after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep)
* remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and
use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead.
This commit actually get rids of all complicated and asymmetric _cmp
functions. I first thought these functions were worth it, be caused it
allowed us to reuse list_find and list_remove. But this was at the detriment
of the clarity and also the ease of use of these functions, dangerous
because of their asymmetricity.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now the syntax is coherent with alpm_list_find and alpm_sync_find.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Pulled two loops out of _alpm_remove_prepare and gave them their own
functions.
Signed-off-by: K. Piche <kevin@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This should be a notable speed-up (apart from kernel cache).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was totally useless.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Conflicts:
configure.ac
|
|
We do the opposite.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
_alpm_pkgname_pkg_cmp(pkgname, pkg) returns true iff pkg's name is pkgname.
This is useful if you want to remove a package from pmpkg_t* list, and you
want to search for package name.
This allows cleaning the -Ru code a bit, by removing the need of a dummy
pkg.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
With --unneeded option 'pacman -R' doesn't stop in case of dependency error;
it removes the needed-dependency targets from the target-list instead. See
also: http://archlinux.org/pipermail/pacman-dev/2007-October/009653.html .
The patch also adds a new causingpkg field to pmdepmissing_t which indicates
the to-be-removed package which would cause a dependency break. This is
needed, because miss->depend.name may be a provision. miss->causingpkg will
be useful in -R dependency error messages too.
[Xavier: renamed inducer to causingpkg, removed the _alpm_pkgname_pkg_cmp
helper function as requested by Aaron. This might be added by a further
commit. Other small cleanups, updated manpage and bash completion.]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Moves "checking dependencies..." notification into code block where
dependency checking is performed to stop spurious notification.
Reference: http://archlinux.org/pipermail/pacman-dev/2008-January/010714.html
Signed-off-by: Allan McRae <mcrae_allan@hotmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This also affects all structures with static strings, such as depmiss,
conflict, etc. This should help a lot with memory usage, and hopefully make
things a bit more "idiot proof".
Currently our pactest pass/fail rate is identical before and after this
patch. This is not to say it is a perfect patch- I have yet to pull valgrind
out. However, this should be quite safe to use in all situations from here
on out, and we can start plugging the memleaks.
Original-work-by: Aaron Griffin <aaronmgriffin@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
commit b55abdce7a changed every instance of lstat to alpm_stat to remove an
eventual trailing /, but in remove.c, this is not wanted.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-December/010451.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Update the GPL boilerplate to direct people to the GNU website for a copy of
the license, as well as bump all of Judd's copyrights to 2007.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
checkdeps and resolvedeps now take both a remove list and an install list as
arguments, allowing dependencies to be calculated correctly.
This broke the sync990 pactest, but this pactest used dependencies and
provides in an unusual way, so it has been changed.
Dan: the sync990 pactest was just plain wrong. It didn't satisfy the
dependencies correctly, so should never have succeeded.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: some variable renaming, clarification in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* The frontend calls alpm_trans_prepare(&data), and in case of errors,
receive the missing dependencies / conflicts / etc in the data pointer.
It apparently needs to free this structure totally with :
alpm_list_free_inner(data, free)
alpm_list_free(data)
So I added alpm_list_free_inner(data, free) in
pacman/{sync.c,remove.c,add,c}
* in _alpm_sync_prepare, the deps and asked lists were not freed in case
of errors (unresolvable conflicts).
Besides the code for handling this case was duplicated.
* in _alpm_remove_commit, free was used instead of alpm_list_free for
newfiles.
* newline fix in pacman/sync.c
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The names related to conflicts are misleading :
For dependencies conflicts, the type is pmdepmissing,
and the function names contain just "conflict".
For file conflicts, the type is pmconflict,
and some functions contained just "conflict", some others "fileconflict".
So this is the first step for improving the situation.
Original idea/patch from Nagy, but the patch already didn't apply anymore,
so I did it again.
The main difference is that I kept the conflictype, with the following renaming :
pmconflicttype_t -> pmfileconflicttype_t
PM_CONFLICT_TYPE_TARGET -> PM_FILECONFLICT_TARGET
PM_CONFLICT_TYPE_FILE -> PM_FILECONFLICT_FILESYSTEM
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
This file only contained one private function : _alpm_db_whatprovides .
And the public alpm_db_whatprovides was in db.c , so I moved everything there.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: updated POTFILES.in as well]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Run the kernel's cleanfile script on all of our source files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Instead of using the often-busted REQUIREDBY entries in the pacman database,
compute them each time they are required. This should help many things:
1. Simplify the codebase
2. Prevent future database corruption
3. Ensure when we do use requiredby, it is always correct
4. Shrink the pmpkg_t memory overhead
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It's time to define that alpm_list_add(list, foo) adds 'foo' to the end of
'list' and returns with 'list', because:
1. list is a list, not a set.
2. sortbydeps _needs_ an alpm_list_add definition to work properly.
As a first step, I used this definition in recursedeps.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: punctuation cleanup in commit message and code comments, added comment
to alpm_list_add]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
List head nodes contain null 'prev' pointer, which we can (ab)use to maintain a
back reference to the tail pointer of the list.
While list additions are not _significantly_ improved, they are still sped up.
Original
$ time pacman -Qo /usr/bin/wtpt
/usr/bin/wtpt is owned by lcms 1.17-2
real 0m3.623s
user 0m1.883s
sys 0m1.473s
New
$ time pacman -Qo /usr/bin/wtpt
/usr/bin/wtpt is owned by lcms 1.17-2
real 0m2.006s
user 0m0.263s
sys 0m1.627s
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Linux lstat follows POSIX standards and dereferences a symlink pointing
to a directory if there is a trailing slash. For purposes of libalpm, we
don't want this so make a lstat wrapper that suppresses this behavior.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I broke scriptlet logging with ad691001e20272b794d2ed574b556f520e3555c0.
Readd more or less what was there before, although it still needs a lot of
work including hopefully rewriting it to a new event subsystem and having
it log to a seperate file.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Normally you must never see that error message.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixed a few of our formatted output strings that were broken before
but never being checked.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The strings differed in quotes only, this way we have only one i18n string for
translation
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
|