| Age | Commit message (Collapse) | Author |
|---|
|
make update-copyright OLD=2017 NEW=201
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If the user replaces a directory with a symlink, libalpm would get
confused because the trailing slash causes system calls to resolve the
symlink. This leads to errors and a misleading message during upgrades.
Even though libalpm does not support this, it should not be giving
misleading errors.
Also adds an overflow check.
Fixes FS#51377
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Also add pactest which captures this leak when run under valgrind.
Reported-by: Sergey Petrenko
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Checking install status and if a package is optionally required on removal
now considers the version of the optdepend.
Fixes FS#44957.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a transaction is removing a package while ignoring all dependencies, there
should not be any warning about other packages optionally requiring it.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Paths from noupgrade, the transaction skip_remove, and package backup
lists were combined into a single list matched using fnmatch causing
paths with glob characters to match unrelated files.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
ALPM still adds a warning to the log, but doesn't emit an event about
said warning, instead using a specific event to let the frontend what
happened/how to inform the user.
Note that there are 2 cases for installing a .pacnew file, to not
overwrite user changes and because file is in NoUpgrade. In the later case
the warning was a bit different: it happened before and said "extracting"
instead of "installed." Now both happen after and are phrased the same.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This moves the "wrong args" error up from trans_commit to add_pkg when
used with a local pkg and adds the error for remove_pkg when used with
a sync pkg, which currently just removes the db entry.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Instead of using two void* arguments for all events, we now send one
pointer to an alpm_event_t struct. This contains the type of event that
was triggered.
With this information, the pointer can then be typecasted to the
event-specific struct in order to get additional arguments.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Front-ends should be able to free memory that alpm hands them.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Forcing vim users to view files with a tabstop of 2 seems really
unnecessary when noet is set. I find it much easier to read code with
ts=4 and I dislike having to override the modeline by hand.
Command run:
find . -type f -exec sed -i '/vim.* noet/s# ts=2 sw=2##' {} +
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Because this event is triggered when an optdepend for another package is
being removed.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Packages can be removed during a sync transaction either directly or
due to conflicts and need to be sorted.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This commit:
-- replaces space-based indents with tabs per the coding standards
-- removes extraneous whitespace (e.g. extra spaces between function args)
-- adds missing braces for a one-line if statement
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
|
|
This ensures that important events will be logged and consistent
regardless of the frontend. The need for global context in the event
callback is also removed. The event is logged before any post_* scripts
run, so this also moves the post_* script output underneath the event in
the log.
Fixes FS#36504
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Improves consistency and makes it clear that targs will be modified by
_alpm_recursedeps.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Detecting indirect dependencies by traversing a package's entire
dependency tree is prohibitively slow for larger transactions. Instead
add local packages to the dependency graph. This additionally requires
delaying dependency ordering for sync operations so that removed
packages may be excluded from dependency detection.
tests/sync012.py was also updated to ensure that the dependency cycle
was actually detected.
Fixes FS#37380
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We always want to work with the package file itself, not its target if
it's a symlink.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Although technically correct, this results in my system taking ~30 seconds
to resolve all filelists when removing a package that has a directory not
owned by any package. The check for if any package own the empty directory
is a rare enough occurance, and it will be even rarer when that directory
has a directory symlink in its path, so just revert this at this stage.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
alpm_filelist_contains was being used to search for resolved paths, but
searching in the unresolved paths, causing it to miss matches. We
always search unresolved paths and search the resolved paths if
available because _alpm_filelist_resolve is not public and requires
a context handle, so it can't be called from alpm_filelist_contains.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Arch Linux typically runs into this with /sys when upgrading the
filesystem package in build chroots, but LXC users might also run into
this, since their /sys is shared from the host and must, for security
reasons, be mounted RO.
I've neglected to add any tests for this because they would require root
in order to run. Current tests all pass with this patch and I've
confirmed the desired behavior in a VM. Incidentally, the first hunk of
this patch (skipping can_remove_file checks for directories) resolves the
case of API mountpoints being removed since they eventually fall into
unlink_file and fail with "contains files". However, this patch should
still be the Right Thing To Do™, as we can't possibly remove a directory
that is also a mountpoint.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
[Allan] Do not skip checking if directories can be removed. Instead test
if directories are mountpoints in can_remove_file.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
prefix defaults to "UNKOWN" if null or an empty string is provided.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Teach pacman to save backup files with extension .pacsave.n, where n is a
positive integer. The current backup file shall be saved as <name>.pacsave,
while existing .pacsave.n files will be renamed to <name>.pacsave.n+1
Example:
1. You have subversion installed in your local repo. /etc/conf.d/svnserve
is a file to be backed up. It contains local modifications
2. You remove subversion from your repo. /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
2. You install subversion again
3. You edit /etc/conf.d/svnserve
4. You remove subversion. The existing /etc/conf.d/svnserve.pacsave is renamed
to /etc/conf.d/svnserve.pacsave.1 and /etc/conf.d/svnserve is backed up as
/etc/conf.d/svnserve.pacsave
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Rebased from original email and adjusted for util-common usage.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This function is particularly useful, so make it public.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When a package is being removed, provide a notification (via a callback)
if any local package requires it as an optdepend.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We have a few of these and might as well gather them together. This also
cleans up the code a bit by using an enum instead of integer values, as
well as makes a "search for file in filelist" function public so
frontends can do better than straight linear search of the filelists.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/diskspace.c
src/pacman/util.h
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/signing.c
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We don't need two log messages back-to-back about the same thing here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that filelist arrays know their own size, we don't need to do the
bookkeeping we used to do when they were linked lists. Remove some of
the counter variables and use math instead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Extract the actual unlinking of files into a new method, which
eliminates a goto used for flow control. Also fix up a few small issues
in the code:
* Unnecessary (unsigned long) cast, use '%zd' instead
* Total up errors returned from unlink_file calls and return to caller
* Be consistent with scriptlets- we run pre_remove on dbonly, so we
should also run post_remove. Both can be disabled by way of the
--noscriptlet argument.
* Don't pass an invalid pointer to oldpkg to the event callbacks;
instead call the callback before we free the object.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Ensures that config.h is always ordered correctly (first) in the
includes. Also means that new source files get this for free without
having to remember to add it.
We opt for -imacros over -include as its more portable, and the
added constraint by -imacros doesn't bother us for config.h.
This also touches the HACKING file to remove the explicit mention of
config.h as part of the includes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is work originally provided by Sascha Kruse on FS#20360 with only
minor adjustments to the implementation. It's been expanded to cover:
NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup.
Adds tests ignore008, sync139, sync502, and sync503.
Also satisfies FS#18988.
Original-work-by: Sascha Kruse <knopwob@googlemail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We can take a large shortcut here that saves us a lot of time,
especially when upgrading packages with lots of directories. Obviously
iterating the full file list of every single package to determine if
this directory was present in any other package can take quite some time
on a system with many packages installed. We don't need to remove a
directory at all if we are upgrading a package and the version we are
moving to still had the directory.
Also make a small optimization on the package comparsion- we really only
care about equality here, not the result of the compare, so we can
shortcut using our name_hash.
What kind of benefit does this give us? Oh, only a reduction from 295.7
million to 1.4 million strcmp() calls (99.5% fewer) during a
`pacman -S linux libreoffice-common` operation.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Expose the current static get_pkgpath() function internally to the rest
of the library as _alpm_local_db_pkgpath(). This allows use of this
convenience function in add.c and remove.c when forming the path to the
scriptlet location.
Signed-off-by: Dan McGee <dan@archlinux.org>
|