Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/lib/libalpm/package.c
AgeCommit message (Collapse)Author
2010-10-13Complete rework of package accessor logicDan McGee
Hopefully we've finally arrived at package handling nirvana, or at least this commit will get us a heck of a lot closer. The former method of getting the depends list for a package was the following: 1. call alpm_pkg_get_depends() 2. this method would check if the package came from the cache 3. if so, ensure our cache level is correct, otherwise call db_load 4. finally return the depends list Why did this suck? Because getting the depends list from the package shouldn't care about whether the package was loaded from a file, from the 'package cache', or some other system which we can't even use because the damn thing is so complicated. It should just return the depends list. So what does this commit change? It adds a pointer to a struct of function pointers to every package for all of these 'package operations' as I've decided to call them (I know, sounds completely straightforward, right?). So now when we call an alpm_pkg_get-* function, we don't do any of the cache logic or anything else there- we let the actual backend handle it by delegating all work to the method at pkg->ops->get_depends. Now that be_package has achieved equal status with be_files, we can treat packages from these completely different load points differently. We know a package loaded from a zip file will have all of its fields populated, so we can set up all its accessor functions to be direct accessors. On the other hand, the packages loaded from the local and sync DBs are not always fully-loaded, so their accessor functions are routed through the same logic as before. Net result? More code. However, this code now make it roughly 52 times easier to open the door to something like a read-only tar.gz database backend. Are you still reading? I'm impressed. Looking at the patch will probably be clearer than this long-winded explanation. Signed-off-by: Dan McGee <dan@archlinux.org> [Allan: rebase and adjust] Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-13Allow local and sync db to be treated separatelyDan McGee
Implement this seemingly simple change in package.h: typedef enum _pmpkgfrom_t { - PKG_FROM_CACHE = 1, - PKG_FROM_FILE + PKG_FROM_FILE = 1, + PKG_FROM_LOCALDB, + PKG_FROM_SYNCDB } pmpkgfrom_t; which requires flushing out several assumptions from around the codebase with regards to usage of the PKG_FROM_CACHE value. Make some changes where required to allow the switch, and now the correct value should be set (via a crude hack) depending on whether a package was loaded as an entry in a local db or a sync db. This patch underwent some big rebasing from Allan and Dan. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-10-13Unify caching concerns in package accessorsDan McGee
Move almost all of the caching related stuff into a single #define (which should maybe even just be a static function) so we don't duplicate logic all over the place. This also makes the code a heck of a lot shorter and means further changes to this stuff don't have to touch each and every getter function. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Set pm_errno on libarchive errors while readingSebastian Nowicki
Signed-off-by: Sebastian Nowicki <sebnow@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-21libalpm: compare pkgname with strcollAndres P
Use strcoll to compare package names to provide output sorted according to a users LC_COLLATE settings. Signed-off-by: Andres P <aepd87@gmail.com> [Allan: added commit message] Signed-off-by: Allan McRae <allan@archlinux.org>
2010-05-04Move vercmp code into a separate fileDan McGee
This will facilitate using this object file on its own in the vercmp tool which will be done in a future commit. The net impact on the generated binaries should not be noticeable after this commit. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-25Sort and avoid duplicates in -Sii outputAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-23Show 'Required By' in -Sii outputDan McGee
Just as we do in -Qi, we can compute required by information for sync database packages. The behavior seems sane; for a given package, the -Sii required by will show all packages in *any* sync database that require it. Implements FS#16244. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14Bump copyright dates to 2010Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14fix a few warnings reported by clangXavier Chantry
- remove unused variables - some more sanity checks - safer printf Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-12-07Fix requiredby outputDan McGee
This is a bit embarrassing. For example: $ pacman -Qi mesa ... Required By : mesa mesa mesa mesa mesa mesa Something is clearly not right, and the problem was introduced in commit 0bc961. Fix the issue by getting the package name off the correct variable. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-24Reduce unnecessary get_name() function callsDan McGee
alpm_pkg_get_name() gives us little benefit in backend code besides a NULL check on the package passed in; we could do that ourself if necessary. By changing to direct references in the cases where we are sure we have a valid package, we save a function call each time we need a package name. This function can't be inlined because it is externally accessible. This cuts the calls to get_name() from 1.3 million times in a pacman -Qu operation to around 2400. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-11int typing: s/unsigned short/int/ in libalpmDan McGee
After our recent screwup with size_t and ssize_t in the download code, I found the `-Wsign-conversion` flag to GCC to see if we were doing anything else boneheaded. I didn't find anything quite as bad, but we did have some goofups- most of our public unsigned methods would return -1 on error, which is a bit odd in an unsigned context. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-08Remove transaction typeXavier Chantry
This basically started with this change : /* Transaction */ struct __pmtrans_t { - pmtranstype_t type; pmtransflag_t flags; pmtransstate_t state; - alpm_list_t *packages; /* list of (pmpkg_t *) */ + alpm_list_t *add; /* list of (pmpkg_t *) */ + alpm_list_t *remove; /* list of (pmpkg_t *) */ And then I have to modify all the code accordingly.
2009-09-08Use sync.c for upgrade transaction prepare and commitNagy Gabor
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798. Now an upgrade transaction is just a sync transaction internally (in alpm), so all sync features are available with -U as well: * conflict resolving * sync dependencies from sync repos * remove unresolvable targets See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html for the concept. We use "mixed" target list, where PKG_FROM_FILE origin indicates local package file, PKG_FROM_CACHE indicates sync package. The front-end can add only one type of packages (depending on transaction type) atm, but if alpm resolves dependencies for -U, we may get a real mixed trans->packages list. _alpm_pkg_free_trans() was modified so that it can handle both target types _alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead _alpm_add_commit() was renamed to _alpm_upgrade_targets() sync.c (and deps.c) was modified slightly to handle mixed target lists, the modifications are straightforward. There is one notable change here: We don't create new upgrade trans in sync.c, we replace the pkgcache entries with the loaded package files in the target list (this is a bit hackish) and call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is not accessible anymore), but it doesn't hurt anything with pacman front-end, so it will be fixed later (otherwise this patch would be huge). I updated the documentation of -U and I added a new pactest, upgrade090.py, to test the syncdeps feature of -U. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-07-01Update copyright headers and messagesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-06-07Introduce _alpm_pkg_free_trans()Nagy Gabor
The main purpose of this function to make our code more readable. It frees transaction specific fields of pmpkg_t. (It is used when a package is removed from the target list.) Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-11Remove pmsyncpkg_tNagy Gabor
pmsyncpkg_t data sructure was removed: 1. pmpkg_t.reason is used instead of pmsyncpkg_t.newreason. (The target packages come from sync repos, so we can use this field without any problems. Upgrade transaction also uses this field to store this info.) 2. pmsyncpkg_t.removes was moved to pmpkg_t.removes. This step requires careful programming, because we don't duplicate packages when we add them to trans->packages. So we modify sync pkgcache when we add this transaction-only info to our package. Hence it is important to free this list when we remove any package from the target list (remove_unresolvable, remove_conflicts, trans_free), otherwise this could confuse the new sync transactions (with non-pacman GUI). Overall, our code became ~100 line shorter, and we can call our helper functions directly on trans->packages in sync.c, we don't need to maintain parallel package lists. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-10-12Merge branch 'maint'Dan McGee
2008-10-12Remove unnecessary unistd.h header inclusionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23New public alpm_pkg_get_db functionNagy Gabor
This function returns with the origin database of a package. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Cleanup of _alpm_pkg_compare_versions.Xavier Chantry
* Change the return values to be more informative. It was previously boolean, only indicating if a sync package was newer than a local package. Now it is a simple wrapper to vercmp, handling the force flag. * Remove the verbose output from _alpm_pkg_compare_versions. The "force" message is not so useful. The "package : local (v1) is newer than repo (v2)" message can be moved to -Su operation. For the -S operation, it is better to have something like : "downgrading package from v1 to v2" * Don't display the "up to date -- skipping" and "up to date -- reinstalling" messages, when the local version is newer than the sync one. * Fix the behavior of --needed option to not skip a target when the local version is newer, and clarify its description. * Add a new alpm_pkg_has_force function This allows us to access the pkg->force field like any other package fields. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24libalpm/package.c : fix infolevel bug in pkg_dupXavier Chantry
The pkg_dup function shouldn't call any alpm_pkg_get_ accessors because this can fill the old package with all INFRQ_DESC fields for example, and this won't necessarily be reproduced in the new package (for all the fields that were copied before). Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-24Fix vercmp and add additional testsDan McGee
This vercmp issue has been a sticking point but this should resolve many of the issues that have come up. Only a few minor code changes were necessary to get the behavior we desired, and this version appears to beat any other vercmp rendition on a few more cases added in this commit. This commit passes all 58 vercmp tests currently out there. Other 'fixes' still fail on a few tests, namely these ones: test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1 ==> FAILURE test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1 ==> FAILURE test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1 ==> FAILURE test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1 ==> FAILURE 4 of 58 tests failed Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-07New _alpm_dep_edge functionNagy Gabor
The function is introduced to kill some code duplication. The function name uses the 'dependency graph' terminology. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-07Don't duplicate packages in requiredby listNagy Gabor
This is a "fix" for FS#10226. I think that multiple versioned dependencies are quite common now, and the old behavior is quite annoying there. This patch won't cause any slow-down. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-04Use correct C type for file sizesDan McGee
We have been using unsigned long as a file size type for a while, which works but isn't quite correct and could easily break. Worse was probably our use of int in the download callback functions, which could be restrictive for packages > 2GB in size. Switch all file size variables to use off_t, which is the preferred type for file sizes. Note that at least on Linux, all applications compiled against libalpm must now be sure to use large file support, where _FILE_OFFSET_BITS is defined to be 64 or there will be some weird issues that crop up. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-30Fix versioncmp regression after updateDan McGee
Commit 84283672853350a84d2a71b72dc06e180cad1587 introduced the regression, and a previous commit introduced the vercmptest.sh test script to track down these issues. This commit solves the problem by removing the previous attempt at locating the pkgrel portions and replacing it with something that performs the correct logic. While tracking down everything I needed to, I also found a mistake in one of the pactests which is fixed here as well as increased the functionality and verbosity of the vercmptest script to both print out each test it is running as well as automatically run the mirror of each test case. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-14Remove wrapper call around versioncmpDan McGee
Actually, just rename _alpm_versioncmp to alpm_pkg_vercmp and get rid of the need for a wrapper since it did nothing anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-14Update _alpm_versioncmpDan McGee
This code hasn't been looked at in some time. I grabbed a more recent version of the RPM source (4.4.2.3) and attempted to sync up any changes they have made, as well as make the libalpm additional code much cleaner and limited to only a few added lines of code. The size of this patch might make you think we added code, but bloat-o-meter actually tells us otherwise: <function> <old> <new> <diff> _alpm_versioncmp 1485 1021 -464 Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Simplify _alpm_pkg_new()Dan McGee
Any real call of this function doesn't specify a name or version ahead of time, so just kill that functionality off. Now to remove those dummy packages... Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Remove lazy init code from pkg name and version functionsDan McGee
If we have a package without name and/or version, we are really out of luck. Speed these functions up by removing unnecessary code. Note that both the splitname and pkg_load functions, where the name and version of packages are initially populated for databases and pkg.tar.gz files respectively, enforce that every new package struct created has a name and version. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Cleanup usages of alpm_list_find and alpm_list_remove.Chantry Xavier
* remove obsolete and unused *_cmp helper functions like deppkg_cmp and _alpm_grp_cmp * new alpm_list_remove_str function, used 6 times in handle.c * remove _alpm_prov_cmp / _alpm_db_whatprovides and replace them by a more general alpm_find_pkg_satisfiers with a cleaner implementation. before: alpm_db_whatprovides(db, targ) after: alpm_find_pkg_satisfiers(alpm_db_getpkgcache(db), targ) * remove satisfycmp and replace alpm_list_find + satisfycmp usage by _alpm_find_dep_satisfiers. before : alpm_list_find(_alpm_db_get_pkgcache(db), dep, satisfycmp) after : _alpm_find_dep_satisfiers(_alpm_db_get_pkgcache(db), dep) * remove _alpm_pkgname_pkg_cmp, which was used with alpm_list_remove, and use _alpm_pkg_find + alpm_list_remove with _alpm_pkg_cmp instead. This commit actually get rids of all complicated and asymmetric _cmp functions. I first thought these functions were worth it, be caused it allowed us to reuse list_find and list_remove. But this was at the detriment of the clarity and also the ease of use of these functions, dangerous because of their asymmetricity. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-13Swap the parameters of alpm_pkg_findNagy Gabor
Now the syntax is coherent with alpm_list_find and alpm_sync_find. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-05-11Refactor pkg_load/parse_descfile into a new backend fileDan McGee
alpm_pkg_load() and parse_descfile() are specific to getting information from package files, just as other code is specific to getting information into or out of a package database. Move this code out of package.c, which should eventually only contain operators on the pmpkg_t struct that do not depend at all on where the data came from. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26get_filename : use the FILENAME db field only.Chantry Xavier
Reference : FS#9547. The get_filename function first tries to get the filename field from the database, and if it doesn't find it, it tries to guess it based on the name, version and arch. This field was introduced in 3.0, but there are still many old entries in the official databases without it. So the databases need to be regenerated first before this patch can be applied. There is a second problem with the delta code, which needs the filename for locally installed packages too, but this field is not present in the local db. So the delta code needs to be fixed first. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-26Completely rework delta algorithmChantry Xavier
Using the graph structures that Nagy set up for dependency sorting, we now do a similar process for deltas. Load up all of the deltas into a graph object on which we can then apply Dijkstra's algorithm, using the new weight field of graph struct. We initialize the nodes weight using the base files that we can use in our filecache (both filename and md5sum must match). The algorithm then picks the best path among those that can be resolved. Note that this algorithm has a few advantages over the old one: 1. It is completely file agnostic. These delta chains do not have to consist of package files- this could be adopted to do delta-fied DBs. 2. It does not use the local_db anymore, or even care if a package or file is currently installed. Instead, it only looks in the filecache for files and packages that match delta chain entries. Original-work-by: Dan McGee <dan@archlinux.org> Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-04-06Remove unnecessary header file, move one macro to util.cDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-04-06libalpm error cleanup, step 1Dan McGee
Remove unused error codes, begin refactoring some of the others. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-27Read .PKGINFO directly from package fileDan McGee
With the addition of the archive_fgets() function, we can now skip the temp file usage in pkg_load/parse_descfile that was not needed. This has a nice benefit of probably being both faster, reducing code, and getting rid of "expensive" file operations. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-01Merge branch 'maint'Dan McGee
2008-03-01Set a missing pm_errno in _alpm_pkg_load()Nagy Gabor
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-27libalpm: clean up of md5sum functions.Chantry Xavier
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum, and only used once, so not very useful. I removed them. Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated, so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-15Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/be_files.c lib/libalpm/package.c
2008-02-13Ensure DESC infolevel is loaded before checking pkg->filenameDan McGee
This is the first step of fixing FS#9547. This should not break any existing code that may rely on this function behaving the way it did, and should be good for inclusion in a maint release. In addition, update pactest so it fills the FILENAME field in the DB entries it creates so we can move forward with a real fix to this issue. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-06libalpm/package.c : add _alpm_pkgname_pkg_cmp function.Nagy Gabor
_alpm_pkgname_pkg_cmp(pkgname, pkg) returns true iff pkg's name is pkgname. This is useful if you want to remove a package from pmpkg_t* list, and you want to search for package name. This allows cleaning the -Ru code a bit, by removing the need of a dummy pkg. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-01-21Move the deptest code from frontend to backend.Chantry Xavier
The deptest code (pacman -T) used by makepkg was mostly in the frontend. There were 2 drawbacks: 1) the public splitdep function returns a pmdepend_t struct, but the _alpm_dep_free function for freeing it is private. So there was a memleak. 2) there is a helper in the backend (satisfycmp in deps.c) which makes this function much easier. So this adds a new public alpm_deptest in libalpm/deps.c, which cleans pacman_deptest in pacman/deptest.c a lot. Besides, alpm_splitdep was made private, because the frontend no longer requires it, and _alpm_dep_free is also private. Finally the deptest001 pactest was extended. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-21Convert deltas to dynamic allocationDan McGee
Another elimination of a static length structure in libalpm. Should result in a little more memory saved during execution of packages with lots of deltas attached. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-01-11Merge branch 'maint'Dan McGee
2008-01-11Add functions to manipulate pmdepend_t objectsDan McGee
We didn't have a free function before, causing some memory leaks. We also need a dup function now that strings are not in the structure but are dynamically allocated. Also adapt pmdepmissing_t to use a pointer to a depend struct instead of an inclusive one so we can use the functions we created here. Signed-off-by: Dan McGee <dan@archlinux.org>