Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/lib/libalpm/alpm.h
AgeCommit message (Collapse)Author
2007-10-19Add pmdelta_t structure and functions to libalpm.Nathan Jones
Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-10-14Updates to fix Doxygen documentation generationDan McGee
We had way too much going on with the Doxygen manpage generation. Clean it up quite a bit by removing directory manpages, using relative paths, not having a manpage for every single alpm function, and ensuring internal functions are not documented publicly. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-28Remove buildtype package accessor prototypeAaron Griffin
This was removed a while ago, but the prototype was still hanging out. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-09-28Support for localized times in metadataAaron Griffin
Packages and DBs now support using the UNIX epoch (seconds since Jan 1, 1970) for use in builddate and installdate. This will only affect newly built packages. Old existing packages with the text format are still supported, but this is deprecated. In the case of removal of text time support, this code will fail gracefully, returning the start of the epoch for broken packages. Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
2007-09-28Add 'full' parameter to alpm_pkg_loadDan McGee
In most cases, we want to fully scan a package when we load it, which serves as a integrity verification check. However, there are times when it is only desired to read the metadata and nothing else, so allow the caller of pkg_load to choose the behavior they need. This pays big dividends in speeding up pacman cache cleaning functionality. Old (729 packages): real 1m43.717s user 1m20.785s sys 0m2.993s New (729 packages): real 0m25.607s user 0m19.389s sys 0m0.543s Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-28Remove package name dependency from libalpmDan McGee
Previously, package names must match a specified scheme or they will cause pacman add operations to fail. This is not a very intelligent or necessary way to act, so remove the dependency on the name of the package to be installed and read all relevant information from the metadata instead. This does have one causality to be addressed later- pacman cache cleaning functionality, which has never been phenomenal, just lost most capability. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-25Preliminary support for optdependsDan McGee
Add some alpm functions for getting optdepends, have makepkg include them in the PKGINFO file, and have a pacman -Qi operation display the raw string as stored by libalpm. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16trans.c : reworking of transaction interruptionsChantry Xavier
My two previous hacks related to this part (8038190c7c4786e1c49494eea1b40cdddcbd5136 and b15a5194d1a8485a2769560e49e6ff03e1862533) were caused by the lack of understanding of a feature introduced a while ago: Better control over CTRL-C interruptions -- do not leave the DB in an inconsistent state (54008798efcc9646f622f6b052ecd83281d57cda). Now I have been looking at this commit, and the added feature is indeed interesting. The main problem I had with it is that it does a rather unusual use of alpm_trans_release, which caused a few problems that I tried to fix in a weird way. I think these problems were caused by the fact that there weren't any difference between "interrupt transaction" and "release a transaction which failed" actions from the alpm_trans_release POV. So I decided to add a new function instead, alpm_trans_interrupt, which is called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so that remove_commit and add_commit can exit cleanly at a safe moment. This allowed me to revert my two previous hacks as well. Also ensure we handle SIGINT correctly in all cases- if a transaction is not ongoing, then we can free the transaction and exit quickly. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-16Remove the DB consistency check from pacman and libalpm.Chantry Xavier
This reverts commit dfc85cb5f516ffbcff557522e9703c5c7d88b047 and b6f3fe6957d0206485eac98fb2120578b75d0058. This DB check is already in testdb (among others). Also testdb now uses the db path set at make time by default, so specifying the db path is optional. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11make alpm_strerror binding friendlyStefano Esposito
I'm currently working on python bindings for alpm written in pyrex. While working i found that declaring alpm_strerror as char * alpm_strerror (void) instead of char * alpm_strerror (int err) and then using pm_errno in the implementation instead of err, could make it more bindings-friendly. Dan: cleaned up and added void to declaration. Instead of replacing existing function, add a new function called 'alpm_strerrorlast(void)'. Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11libalpm/deps.c : export _alpm_checkdeps (-> alpm_checkdeps).Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-09-11libalpm/package.c : add new alpm_pkg_compute_requiredby function.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-08-26separate local from sync dbs on filesystemTravis Willard
Introduce two new methods into the API - alpm_db_register_sync and alpm_db_register_local, which replace the functionality of alpm_db_register. db_register_local always returns the local DB, and db_register_sync will always try to register a sync DB. This conceptually separates the local DB from sync DBs in the code. Also updated the pacman frontend to use the new functions. In addition, this changes the location of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO, This removes the silly limitation that a sync DB couldn't be named 'local', along with structurally separating sync DBs and the local DB in the filesystem. Signed-off-by: Travis Willard <travis@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-21Post trial install changes, round oneDan McGee
A bunch of changes related to my first "real" install of pacman-git into /usr/local and trying to use it. * Shift some uses of free -> FREE in libalpm. * Move stat and sanity checks of config paths into libalpm from the config and argument parsing in pacman.c. * Fix issue where dbpath still was not defined early enough due to its requirement for being used in alpm_db_register. This should be rewritten so it doesn't have this dependency, but this will work for now. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-20Add const qualifier to md5_file and alpm_get_md5sumDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-16Remove support for SHA1 from pacman.Andrew Fyfe
There's no need for a second hashing algorithm. MD5 serves the purpose of verifying that a package file hasn't been corrupted during download. Signed-off-by: Andrew Fyfe <andrew@neptune-one.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-08-16libalpm/db.c : add alpm_db_unregister_all.Chantry Xavier
This basically moves the code from alpm_release, which was mostly about unregistering all databases, to a safer alpm_db_unregister_all. This allows to avoid modifying the dbs_sync list while iterating over it, and and also prevent alpm_release from looping infinitely when a database can't be unregistered. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2007-07-16new pmdepend_t / pmdepmissing_t accessors.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-14Ensure requiredby entries are removed during an upgradeDan McGee
This fixes the failure of the requiredby004 pactest in a not so pretty way, but it gets the job done. I purposely used the extremely long name of PM_TRANS_TYPE_REMOVEUPGRADE to be both clear and in the hope that someone else will figure out a better solution. Original idea from Nagy Gabor, patch updated and cleaned for current code. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-10Cleanup of pacman_deptest()Andrew Fyfe
Clean up some left over code from http://projects.archlinux.org/git/gitweb.cgi?p=pacman.git;a=commitdiff;h=7653bb93997f52848b54ab80868cd6da52808a75 Signed-off-by: Andrew Fyfe <andrew@neptune-one.net> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-06Various small fixes as suggested by some static code checkersDan McGee
I ran flawfinder and sparse over the pacman source code and found a few things that were worth fixing (and were quick fixes). Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27Remove lockfile configuration from frontend, make it job of libalpmDan McGee
I previously introduced some patches to make just about every path in pacman/libalpm configurable; doing this with the lockfile seemed a bit too far and we really should just place the lockfile where it belongs- with the DB that needs locking. More details in this thread: http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-27Remove scriptlet START and DONE commands that we don't useDan McGee
The scriptlet calling had some unneeded complexity for the time being which we aren't using here. Let's get rid of it until we find a good way to implement it correctly. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-13Remove some more diskspace checking holdover stuffDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-10Implement simple topological sort algorithm for sortbydepsNagy Gabor
Based on the "depth first search" algorithm, for more infos visit: http://en.wikipedia.org/wiki/Topological_sorting The previous algorithm used by sortbydeps was too slow, and to work around it the number of steps needed to get correct result was reduced greatly. So it produced wrong results in several cases : 1) smoke001.py 2) http://bugs.archlinux.org/task/7229 More here: http://archlinux.org/pipermail/pacman-dev/2007-April/008057.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Allow multiple CacheDirs to be specifiedDan McGee
This should hopefully allow multiple cache dirs to be specified in pacman.conf and/or on the command line, and allow pacman to test each one for the package file. The first one found to be writeable is used as the download cache. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Add a alpm_db_test() function to the backend for checking DB consistencyVMiklos
Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Fix up things after the last few changesDan McGee
* Readd default logmask of ERROR and WARNING * Remove DOWNLOAD log level as it no longer applies * Add 'no targets' logic back in where it applies * Switch some prints in parseconfig to ERROR Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-09Remove logmask stuff from backend; switch logging callback to new pm_printfDan McGee
Remove the logmask functionality from the backend as it has been moved to the frontend, and change the logging callback function to use pm_printf. In addition, make much better use of va_list- use the args list instead of a arbitrarily chosen string to print to in the logging functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-05Const correctness!Dan McGee
Add some 'const' keywords all over the code to make it a bit more strict on what you can and can't do with data. This is especially important when we return pointers to the pacman frontend- ideally this would always be untouchable data. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-04Merge branch 'alpm.c_cleanup' into frontend_configDan McGee
Conflicts: lib/libalpm/alpm.c
2007-06-04Fix up outstanding parseconfig issuesDan McGee
The db variable was left unset when calling alpm_db_register, leading to a failure to ever register a sync db. Also added a check to ensure DBPath was set when trying to register a database. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-04Rip alpm_parse_config out of libalpmDan McGee
Switch over to the new frontend parseconfig. * Fix a few issues in parseconfig * Remove unused callback upon database registration * Remove conf file related errors from error.c/alpm.h Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-04Move functions out of alpm.c to where they belongDan McGee
alpm.h is the only "publically viewable" file, so there is no reason to have functions in alpm.c that belong in package.c, db.c, etc. Move the functions where they belong and leave only the library init functions in alpm.c. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-06-01Change -z|--showsize flag to ShowSize pacman.conf optionNathan Jones
Also cleaned up some duplicate printf lines related to the ShowSize option. Signed-off-by: Nathan Jones <nathanj@insightbb.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-05-31Move DB and cache dirs away from there dependence on ROOTDIRDan McGee
This change allows us to use all autoconf specified paths, most notably $(localstatedir). It is quite a change and touches a lot of files, as all references to the DB and cache were done with the ROOTDIR as a prefix. * add --lock command-line option to pacman to specify the location of the lockfile (this can now be specified at configure time by setting the $localstatedir path). * Rip quite a few settings out of configure.ac as they are now picked by setting the paths during configure or make. * Fix bug with /tmp fallback for sync downloads not working correctly (related to root location, now the system tmp dir is used). * Simplified the parameters to some libalpm functions, and added get/set for the new lockfile option. * Renamed several of the DEFS to names without the PM_ prefix. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-04-28Remove 'removes' array from libalpmDan McGee
We don't use this functionality for now, so get rid of it and the functions associated with it. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-04-26Set the correct type on the log callback functionDan McGee
Somehow missed this earlier when changing everything to types. unsigned short -> pmloglevel_t wherever necessary. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-03-30Make all paths and file locations configurableDan McGee
Several important paths, file locations, and extensions were #define-d in the source code instead of being configurable. This moves all of these to the configure script where they can be picked upon running ./configure. We may later want to make some of these even more visible and move them to pacman.conf. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-03-29Doxygen fixups for libalpmDan McGee
We haven't done a whole lot with Doxygen so far, so this updates some of the things that have changed a lot- namely, the now public exposure of alpm_list. All functions in this file have now been Doxygen commented, and a few other things in alpm.c were fixed as well. In addition, the Doxygen config file was updated. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-03-19James Rosten <seinfeld90@gmail.com>Aaron Griffin
* Two new pactest test cases * Fix some "required by" / "requires" output by unifying all "dependency types" to a single value (PM_DEP_TYPE_DEPEND)
2007-03-07* Bug fix for makepkg dependency testing. This requires that weAaron Griffin
expose alpm_splitdep and alpm_depcmp as public symbols * Removed a duplicate strtrim for question responses
2007-03-06* Added missing header include guards in md5.h and sha1.h.Dan McGee
* Some header cleanup on the pacman side of things - we had alpm.h instead alpm_list.h in a few headers. * removed an extra slash in path-building snprintf in server.c.
2007-03-03Big commit this time:Aaron Griffin
* Moved entirely to alpm_pkg_get_* accessors, to read data on demand * Mostly removed the INFRQ_ parameters from outside the be_files backend (making the backend more extensible in the long run) * packages created from _alpm_db_scan now have the db and origin set (making accessors actually work for these packages) * removed _alpm_db_ensure_pkgcache * totally revamped the _alpm_checkconflicts function, making it cleaner and easier to read (and thus fix in the long run) - maintainable code ftw NOTE: feel free to rename the functions... I couldn't think of anything better * removed an extra loop in sync.c:find_replacements - no sense in looping over an entire DB while strcmp'ing the name, when we have get_pkgfromcache Other: * package struct "license" -> "licenses" * Created _alpm_sync_find (duplicate code in some places, find_pkginsync * Minor const correctness changes along the way * fixed a couple extra '/' pathing issues (non-issues really) * removed a duplicate pkg_cmp function
2007-02-26* Enforce const char* params when using stringsAaron Griffin
* Unified some functions names "package" -> "pkg" for consistency * Removed the goofy 'faketarget' stuff used for dep testing * Renamed alpm_pkg_isin -> alpm_pkg_find * Renamed alpm_db_readpkg -> alpm_db_get_pkg
2007-02-21* Re-added a compare function for syncpkg's - it was removed without thinkingAaron Griffin
properly * Error when re-reading the DB for replacements, wrong info level * Removed an duplicate debug message "checking for package replacements" * Check ignorepkg for REAL upgrades... * Properly check the NOSAVE flag * some unlink_file (remove.c) cleanup * fix indent level on handle.c * Force libalpm paths to end with a '/' char * Fixed 'target' looping in conflict.c (pmsyncpkg_t, not pmpkg_t) * Added some debug output to cache and db scanning ** All pactest tests succeed again, yay **
2007-02-12* Updated the README fileAaron Griffin
* Removed the handle->needles param. It's not needed not that alpm_list_t is public
2007-02-09* I made "alpm_versioncmp" public a while back, without noticing this was ↵Aaron Griffin
already done (alpm_pkg_vercmp). I dropped this change, making versioncmp "private" again. (alpm_versioncmp -> _alpm_versioncmp, hidden symbol) * Make alpm_get_upgrades use the same version check that -Su and -S use.
2007-02-09* Remove "RETRIEVE_LOCAL" trans event as libdownload handles local filesAaron Griffin
2007-02-09* Fixed some missing error values in strerrorAaron Griffin
* Cleanup up some error enum values * Revamped the 'pmserver_t' functionality. Less allocation, removed a param and cleaned up some duplicate URL parsing