Age | Commit message (Collapse) | Author |
|
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used
anywhere.
This also removes the dependency on makepkg.conf in repo-add, so repo-add no
longer needs to source makepkg.conf
And instead of DB_COMPRESSION, it seems better to just check the extension
of the repository file. It does not make sense to have a tar.gz file with a
tar.bz2 extension or whatever.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As far a package building is concerned, info pages need to be treated
in the same fashion as man pages in that they both can be compressed.
This separates them from other forms of documentation and so it makes
sense to make that distinction within makepkg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
curl is likely to be available on the majority of systems and supports the
file:// protocol.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This really should be in an external script, as it is not makepkg's job to
rebuild your system.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Arch no longer installs Gnome here, and we should be stripping any doc dirs
in /opt anyway, so generalize it. Fixes FS#9597.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We shouldn't have the stock config be Arch specific for a few reasons:
* Although it is our package, others should be able to use it
* Keeping the mirrorlist coupled to the pacman package makes it hard to push
updates to users without releasing a new copy of the pacman source
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch cleans up the Arch-specific pacman.conf (to be provided in
the pacman Archlinux package) in an attempt to reduce the number of
PEBKAC errors seen enabling default-disabled repos.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Kill off some of the $ABSROOT stuff that was still hanging around in there.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
abs has always been an Arch Linux specific tool, and although it is used
primarily by pacman and makepkg, it should not be included with a distro-
agnostic tarball. In addition, maintenance of the script would be better
outside of pacman and would allow for more frequent updates.
This also facilitates our move away from a cvsup/csup dependent tool for
syncing PKGBUILDs.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that all paths are defined to reasonable defaults at compile time by
pacman, we shouldn't force users to have RootDir, DBPath, etc. in their
default pacman.conf although these options are always available.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fix Aaron's busted-a** commit. :P
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks to Jeff Bailes <thepizzaking@gmail.com> for pointing this out.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Remove the need for two variables for the architecture-specific switches
(things like "-march=i686") by combining it into one variable. Also allow
configure to proceed with only a warning if we don't have presets for the
detected architecture- it is kind of stupid to restrict ourselves like we
had been.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
.gitignore works recursively, so we don't need Makefile and Makefile.in
in all of the subdirectory .gitignore files.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fully implement what this commit allows:
ebad1996149d72cf4a1fe15fe8326f2b4996f585
Dan: update .gitignore as well.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add vim modeline to Makefile.am and configure.ac
* Fix white space in Makefile.am and configure.ac
* Add contrib/wget-xdelta.sh to EXTRA_DIST in Makefile.am
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into
pacman.conf, just as LogFile was done before. Add a section to
alpm_parse_config to look for a LockFile directive.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* etc/makepkg.conf.in: Add description for xdelta.
* doc/makepkg.conf.5: Add description for xdelta.
* scripts/makepkg.in: Various clean ups.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* configure.ac: Add AC_SUBST() for ROOTDIR, PKGEXT, DBEXT so
they get exported to Makefiles.
* {makepkg,pacman}.conf.in: Remove extra / from paths.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Add xdelta option to makepkg.conf
Added xfer script to contrib.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|