| Age | Commit message (Collapse) | Author |
|---|
|
Dummy callbacks are still present to prevent compiler warnings until
libalpm is delta free.
Also remove Delta parsing from pacman.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
1. Without `-L`, curl doesn't follow redirects. This is different than
both the default behavior of pacman, and from the wget example. So add
`-L`.
2. It uses `-C -` to supposedly allow resuming partial downloads; but that
doesn't work if we use `> %o` to direct the output to the file.
Instead, use `-o %o` so that `-C -` actually works.
Signed-off-by: Luke Shumaker <lukeshu@parabola.nu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This has outlived its usefulness and causes more problems than it
solves. It has historically only ever been used to install pacman first.
That should not be needed given we provide the vercmp utility (which has
no library dependencies) and so calling pacman in install scripts is a
sign of poor packaging.
Work-duplicated-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rework the frontend and backend to allow passing a ratio value in for
UseDelta rather than having a hardcoded #define-d 0.7 value always used.
This is useful for those with fast connections, who would likely benefit
from tuning this ratio to lower values; it is also useful for general
testing purposes.
The libalpm API changes for this, but we do support the old config file
format with a no-value 'UseDelta' option; in this case we simply use the
old default of 0.7.
We clamp the ratio values to a sane range between 0.0 and 2.0, allowing
ratios above 1.0 for testing purposes.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will have to be picked up downstream of course, but addresses
FS#25684 now that this is a lot faster in 4.0 than it was in the
original 3.5 implementation.
Also make curl the first XferCommand listed, as we are moving away from
any other download program at this point.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is similar to what we do with every other option.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pacman.8.txt --gpgdir section is updated based on the pacman.conf manpage
pacman.conf is updated to include the default GPGDir
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If enabled, displays package lists for upgrade, sync and remove
operations formatted as a table. Falls back to default list display if
insufficient terminal columns are available.
Example output:
:: Starting full system upgrade...
:: Replace libjpeg with testing/libjpeg-turbo? [Y/n]
resolving dependencies...
looking for inter-conflicts...
Remove (1):
Name Old Version Size
libjpeg 8.3.0-1 0.83 MB
Total Removed Size: 0.83 MB
Targets (5):
Name Old Version New Version Size
libjpeg-turbo 1.1.0-1 0.20 MB
linux-firmware 20110201-1 20110227-1 8.23 MB
ncurses 5.7-4 5.8-1 0.92 MB
ppl 0.11.1-1 0.11.2-1 2.74 MB
v4l-utils 0.8.1-1 0.8.3-1 0.23 MB
Total Download Size: 12.32 MB
Total Installed Size: 58.82 MB
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: The commit message originally referenced "VerbosePkgLists", but I'm
going to change the name of the option. In addition, this patch serves
a purpose being standalone- we should really do things like this with
-S --print and hopefully -Q --print in the future.
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This will make a 404 a silent failure that returns an error code rather than
0 as was previously done, screwing up the logic used by pacman/libalpm to
allow moving onto the next server on a failed download. Fixes FS#22630.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Disk space checking is likely to be an unnecessary bottleneck to
people with reasonable partition sizes so add a configuration option
to allow it to be disabled/enabled as wanted.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
similarly to the $repo variable, Server can now contain $arch, which will be
automatically replaced by the appropriate architecture.
This allows us to have one universal mirrorlist file, for both i686 and x86_64,
woohoo!
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
- fix one memleak if get_filename failed
- cleanup according to Joerg's feedback:
"url_for_string: If fetchParseURL returned successful, you should always
have a scheme set. The logic for anonftp should only be needed for very
broken server -- do you know of any such?
download_internal:
Specifying 'p' is now a nop -- it is tried by default first with
fall-back to active FTP."
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: remove from pacman.conf and pacman.conf.5]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
curl is likely to be available on the majority of systems and supports the
file:// protocol.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
We shouldn't have the stock config be Arch specific for a few reasons:
* Although it is our package, others should be able to use it
* Keeping the mirrorlist coupled to the pacman package makes it hard to push
updates to users without releasing a new copy of the pacman source
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This patch cleans up the Arch-specific pacman.conf (to be provided in
the pacman Archlinux package) in an attempt to reduce the number of
PEBKAC errors seen enabling default-disabled repos.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that all paths are defined to reasonable defaults at compile time by
pacman, we shouldn't force users to have RootDir, DBPath, etc. in their
default pacman.conf although these options are always available.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fully implement what this commit allows:
ebad1996149d72cf4a1fe15fe8326f2b4996f585
Dan: update .gitignore as well.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I previously introduced some patches to make just about every path in
pacman/libalpm configurable; doing this with the lockfile seemed a bit too
far and we really should just place the lockfile where it belongs- with the
DB that needs locking.
More details in this thread:
http://archlinux.org/pipermail/pacman-dev/2007-June/008499.html
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Move the defaults for RootDir, CacheDir, DBPath, and LockFile into
pacman.conf, just as LogFile was done before. Add a section to
alpm_parse_config to look for a LockFile directive.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* configure.ac: Add AC_SUBST() for ROOTDIR, PKGEXT, DBEXT so
they get exported to Makefiles.
* {makepkg,pacman}.conf.in: Remove extra / from paths.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Commented ftp.archlinux.org in the official mirror list
* ran a make dist, which updated some translation files
|
|
occasions where some alpm stuff could be used without initializing the
library (vercmp is one). TODO make these functions (handle accessors)
better by returning "library not initialized" instead of failing.
* Removed NoUpgrade lines from pacman.conf - we need to test this!
* Re-corrected the lib targets for src/util/*
* make dist seems to have updated the po files
|
|
|
|
* Fix FS #5409- document that pacman.conf repo ordering is important
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
|
|
http://www.archlinux.org/pipermail/pacman-dev/2006-December/000838.html for details
|
|
* Removal of confusing sortmirrors comment
* Removal of NoUpgrade defaults (handled by packages)
* Move of unstable below community, to illustrate preference.
|
|
|