| Age | Commit message (Collapse) | Author |
|---|
|
Refer to install scripts as scripts and not hooks.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows to ignore specific dependencies.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
Remove blank lines immediately following section headings.
Ensure two blank lines before the start of a new section.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Notable changes:
* Add double quotes around printf-like formatting options for "--print-format"
* Add a missing backslash in '--force'
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
--print-format is totally useless without --print. Implying --print
will also save us the hassle of checking it when we add transaction
option validation.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Specify it twice to only filter direct dependencies.
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Resolve several grammatical errors and minor formatting consistency issues
in pacman(8). Generalize the "FTP servers" and package file extension
information.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Pacman currently bails when trying to extract a file over a directory
when using --force. Instead of ignoring all conflict, perform the
check and skip any file-file conflicts. Conflicts between directories
and files are still flagged and cause the transation to abort.
As a bonus, we now know about files changing packages when using
--force, so we can skip removing them fixing upgrade046.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Conflicts:
scripts/pacman-key.sh.in
|
|
We support multiple arguments being comma separated elsewhere, so this
seems like a natural extension to support in our multiparse selection
code.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This documentation was added in commit 857357f9 so was not caught in the
removal of this option in commit 85712814.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
contrib/pacsysclean.in
src/pacman/conf.h
|
|
This reverts commit f3fa77bcf1d792971c314f8c0de255866e89f3f3 along with
making other necessary changes to fully back this (mis)feature out until
we can do it correctly.
The quick summary here is this was not implemented correctly; provides
are not fully taken into account in this logic, and making that happen
exposes a lot of other flaws in this code that are covered up later on
in the dependency resolving process by several other pieces of
convoluted and conditional logic.
Tests have been adjusted accordingly. Some test EXISTS conditions have
been removed as we already know the package is installed locally, and we
also are checking the VERSION condition anyway.
With these two related revert commits, we do have some changes in test
pass/fail results:
* upgrade078.py: does not pass, this is due to --recursive getting
removed for -U/-S operations after this commit.
* sync302.py: the version checks have been disabled, so this test
continues to pass but has been scaled back in scope.
* sync303.py: now passes, was failing before.
* sync304.py: still failing, was failing before.
* sync305.py: now passes, was failing before.
* sync306.py: still passes, was passing before.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/diskspace.c
src/pacman/util.h
|
|
This removes the hack I added to skip '*.sig' files earlier since there
are other files that also fall into the same bucket- source packages
from `makepkg --source`, delta files, etc. Rather than prompting for
each and every one, simply skip them. Doing '-Scc' rather than '-Sc'
will delete these files if that is really what you want to do.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is not something that should be used on a frequent basis, and
giving it a short option encourages use without making the drawbacks
obvious. For the 1% of situations that require it, the 5 extra
keystrokes are a fair price to pay.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had this interesting set of facts conundrum, according to vercmp
return values:
2.0a < 2.0
2.0 < 2.0.a
2.0a == 2.0.a
This introduces a code change that ensures '2.0a < 2.0.a' as would be
expected by the first two comparisons. Unfortunately this stays us a bit
further from upstream RPM code, but those are the breaks (in RPM, the
versions involving 'a' do in fact compare the same, but they are both
greater than the bare '2.0').
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is somewhat of a dangerous option with limited use cases. Don't
advertise it as an easily accessibly option.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Trivial to implement as the same backend machinery is used anyway.
Document it and add it to the accepted options.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This closely matches what we had before for -R --recursive. Basically,
when specifying a target (e.g., pacman), we can now recursively pull all
dependencies, regardless of version specifiers and whether they are
already satisfied in the local database. This could be used to update
pacman on a system with an old glibc, for example, as both pacman and
glibc would get pulled into the transaction.
This is most useful with --needed to prevent needless reinstalls as
described in the man page changes.
The end goal of this change is to wire it into SyncFirst and have it be
the default mode of operation there, but that belongs in a separate
changeset.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gets us close to using the same modeline in all files we run
through Asciidoc, as well as adding the spell and spelllang
declarations, just as we had in NEWS already.
The choice of 'en_us' is mainly for consistency and because the body of
work already uses these spellings.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The format required for selection of packages within the group selection
dialog is not entirely obvious, so provide some documentation.
Fixes FS#24134.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
pacman.8.txt --gpgdir section is updated based on the pacman.conf manpage
pacman.conf is updated to include the default GPGDir
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When I switched all paths to use `` formatting, I didn't realize
substitution didn't work in these quote marks. Use ++ instead to ensure
attributes are substituted where appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Change "which" to "that" when used in a restrictive clause.
Replace usage of the relative prounoun "those" with a common noun for
added clarity.
Signed-off-by: Matt Mooney <mfm@muteddisk.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
-D is an operation not an option.
Signed-off-by: Matt Mooney <mfm@muteddisk.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
One paragraph for -Suu and one for -Su foo. Fixes FS#23451.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
GnuPG looks for configuration files and keyrings in its home directory.
For a user, that is typically ~/.gnupg.
This patch causes pacman to use /etc/pacman.d/gnupg/ as the default
GnuPG home. One may override the default using --gpgdir on the command-line
or GPGDir in pacman's configuration file.
Signed-off-by: Chris Brannon <cmbrannon@cox.net>
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fix the way we were referring to paths (use ``), .pac* extensions (use
''), and other general things across our main manpages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Change the term 'packages' to 'targets' in the synopsis as well, since
command line parameters could just as well be groups, repos, or URLs.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Jakob Gruber <jakob.gruber@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
-d skips checking the version of a dependency.
-dd skips the whole dependency check.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Florian Pritz <bluewind@server-speed.net>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This includes info on version comparison that is very similar to the stuff
in the pacman manpage, but also a few vercmp examples, the return values,
and other fun stuff.
Also update the version comparison stuff in the pacman manpage.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When a -Sk or -Uk operation induced a removal of an existing local
package, --dbonly was not in effect and the files were all removed.
Fixing this behavior was already marked as TODO in database012 pactest
------------
TODO: I honestly think the above should NOT delete the original les, it
hould upgrade the DB entry without touching anything on the file stem.
E.g. this test should be the same as:
pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz
------------
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
[Dan: small coding style touchup]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The three parts (help, manpage and code) are now organized in the same
way and much easier to compare :
- specific options
- install/upgrade options for -S and -U
- transaction options for -S -R and -U
- global options
After this re-organization, it was easy to update and sync the three
components together. Duplication is also avoided.
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the following, the letters SRUDQ refer to the corresponding pacman
operations.
Most of the work in this commit is about removing as many options as
possible from the global section and moving them to where they actually
belong.
Additionally, --ignore{,group} are added to U and --dbonly is added
to S.
--dbonly added to S
--asdeps moved to S/U/D
--asexplicit moved to S/U/D
--print-format moved to S/U/R
--noprogressbar moved to S/U/R
--noscriptlet moved to S/U/R
--ignorepkg added to U
--ignoregrp added to U
-d moved to S/U/R (--nodeps) and Q (--deps)
-p moved to S/U/R (--print) and Q (--file)
-f moved to S/U
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to contrib/ files, our scripts, and the documentation.
Dan: fix 'make clean' in contrib/ directory.
Signed-off-by: Nezmer <git@nezmer.info>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nico Schottelius <nico@kr.ethz.ch>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had the long option wrong in some places and its behavior wasn't
documented at all with regards to -U/--upgrade.
Signed-off-by: Dan McGee <dan@archlinux.org>
|