Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/doc/makepkg.conf.5.txt
AgeCommit message (Collapse)Author
2013-02-16makepkg.conf.5: fix bulletted list item formattingDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-13makepkg: add lrzip compression supportAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-12-14Added LOGDEST variableWilliam Giokas
Places logs in a pre-defined location. The logs are always neatly labeled with package names and numbers, and this way can be more easily sent to network shares as they are written or compressed/cleaned en masse. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2012-11-27makepkg: create package from stripped debug symbolsAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2012-11-27makepkg: add option to include debugging compiler flagsAllan McRae
Add a "debug" option that appends the compiler flags specified in the variables DEBUG_CFLAGS and DEBUG_CXXFLAGS in makepkg.conf to their counterpart buildflags. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-11-27makepkg: use last match in BUILDENV/OPTIONS arrayAllan McRae
Using the last match in the BUILDENV and OPTIONS arrays allows the user to easily override these values without specifying the entire array. For example add "BUILDENV+=(sign)" in ~/.makepkg.conf. Fixes FS#26701. Signed-off-by: Allan McRae <allan@archlinux.org>
2012-09-18Merge branch 'maint'Dan McGee
2012-09-18Document system and user specific makepkg.confAllan McRae
Add details of the system wide and user specific versions of makepkg.conf to the man page. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-05-20makepkg: Add CPPFLAGS supportAllan McRae
Add CPPFLAGS support in addition to the current CFLAGS and CXXFLAGS. This keeps compiler flags split up in the same logical way done everywhere else. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-03-08makepkg: allow specifying compression optionsChristian Hesse
Adds the ability to override the commands used to compressing compiled and source packages. This is useful for those wanting to use alternative implementations of the compression tools or non-default compression options. Allan: documented options in man page Signed-off-by: Allan McRae <allan@archlinux.org>
2011-11-30makepkg.5: fix typo s/tar,bz2/tar.bz2/Dave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-02doc: consistency when referencing other optionsDan McGee
Use '\--option' rather than `--option` everywhere. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-28Unify modelines in Asciidoc filesDan McGee
This gets us close to using the same modeline in all files we run through Asciidoc, as well as adding the spell and spelllang declarations, just as we had in NEWS already. The choice of 'en_us' is mainly for consistency and because the body of work already uses these spellings. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-07-14Add 'compress' compression format as an available optionDan McGee
This adds the '.tar.Z' option to both repo-add and makepkg for no other reason than "why not", and because bsdtar supports it natively with the '-Z' flag. Also update the documentation accordingly. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22makepkg: allow specifying alternative build directoryAllan McRae
Add a BUILDDIR variable (which can be overridden in the environment) to specify an alternative location for building the package. This is useful for people who want to build on a different filesystem for improved performance (e.g. tmpfs). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-22makepkg: Add UPX compression supportAllan McRae
This patch enables the automatic compression of executable binaries using UPX when the 'upx' options is specified in makepkg.conf or the PKGBUILD. Additional arguments can be passed to UPX by specifying the UPXFLAGS variable. Original-patch-by: Bryce Gibson <bryce@gibson-consulting.com.au> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-14Merge branch 'maint'Dan McGee
Conflicts: doc/makepkg.conf.5.txt
2011-06-13Added check option to BUILDENV array in makepkg.conf man pageEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20Add configure option to specify package signing keyAllan McRae
Add the "GPGKEY" option to makepkg.conf for specifying signing packages with the non-default key from the keyring. Is overridded by makepkg's --key option. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-22Add GPG signature support to makepkgGeoffroy Carrier
This is a rather simple patch to add signing support to makepkg. Add a create_signature() to makepkg, add a 'sign' BUILDENV option in makepkg.conf, and document the changes in the makepkg.conf manpage. Signed-off-by: Geoffroy Carrier <geoffroy.carrier@koon.fr> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-02-02makepkg: make SRCPKGDEST default to $startdirCedric Staniewski
The current behaviour, which is placing source packages in PKGDEST if SRCPKGDEST is not set, is inconsistent with {SRC,PKG}DEST handling and there is no real advantage in doing so. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29makepkg: Add check() function for running test suitesAllan McRae
A PKGBUILD can have an option check() function for running test suites between the build() and package() stages. This function is run by default but can be disabled globally in with "!check" in BUILDENV in makepkg.conf. This setting can be controlled on an individual package basis using makepkg's --check and --nocheck flags. Addition dependencies needed for running the test suite can be specified in the checkdepends array and are only checked when running the check() function. Original-work-by: Jeff C <jeff@kcaccess.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-15Document PKGEXT and SRCEXTAllan McRae
Add some basic documentation for the PKGEXT and SRCEXT options in makepkg.conf. Fixes FS#21302. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-05makepkg: remove STRIP_DIRSAllan McRae
For binary packages, the majority of the time used in the debugs symbol stripping process is the actual stripping of the binaries/libraries and not the testing of which files to strip. This allows more complete stripping of packages that install to "non-standard" paths that would not be generally included in makepkg.conf. Any performance hit that may be apparent for (_large_) "arch=('any')" packages can readily be avoided by disabling stripping in the PKGBUILD options array. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-16Fix distcheck invocation in doc/ directoryv3.4.0Dan McGee
Commit 5fe41df8 broke `make distcheck` pretty badly for the doc directory. Looking at what this commit was trying to accomplish, it make sense to revert a lot of the build system changes and just simplify what we are showing in the man page anyway- an example, not exactly how it is configured on your system. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: make strip options configurableCedric Staniewski
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC, that are set in makepkg.conf, specify the strip options used on binaries and shared and static libraries. In addition, files are now stripped more aggressively by default. Implements FS#13592 the way it was suggested by Allan in the comments. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-02-28makepkg: Add documentation for the new SRCPKGDEST variableNezmer
Add SRCPKGDEST documentation to the makepkg.conf man page Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28makepkg : remove xdelta supportXavier Chantry
The pkgdelta script can be used instead. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13doc: Consistency and formatting cleanups (for master)Dan McGee
Bring master in line with some things we just did on maint. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-13Merge branch 'maint'Dan McGee
Conflicts: doc/makepkg.conf.5.txt
2009-01-13doc: Consistency and formatting cleanupsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-12doc: remove BUILDSCRIPT from makepkg.conf docsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-12makepkg : fix a lot of breakages caused by AllanXavier Chantry
This patch started as a simple typo fix (pugre instead of purge in two places), as well as a fix of a test which was using PURGE_TARGETS instead of $PURGE_TARGETS. It evolved in a slight handling change of the OPTIONS which have a variable affecting their behavior (strip STRIP_DIRS, docs DOC_DIRS, zipman MAN_DIRS and purge PURGE_TARGETS), as well as a clarification in makepkg.conf. Now when a variable is undefined or empty, the corresponding option will have no effect. It looked weird to have a fallback when a option is defined but empty, it seems more natural to not have any fallbacks. Also re-enable docs by default. It seems arbitrary to delete files from packages by default, and it would be more vanilla and distro agnostic to keep them. docs was also the only negated option. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: Add support for specifying LDFLAGSAllan McRae
Provide support for specifying LDFLAGS within makepkg.conf but leaves this undefined by default. Fixes FS#12542. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: Introduce purge optionAllan McRae
The purge option, combined with the PURGE_TARGETS variable, allows makepkg to automatically remove commonly confliting or removed files (e.g. /usr/share/info/dir, *.pod). Original work: Tim Yang Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-03makepkg: provide MAN_DIRS configuration variableAllan McRae
Provides a MAN_DIRS variable in makepkg.conf which can be used to specify folders to look for manual (man and info) pages to be compressed. Useful for packages that install to /opt. Also clarifies that "zipman" means "zip manuals" and covers both man and info pages. Original work by: Tiago Pierezan Camargo <tcamargo at gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-26Merge branch 'maint'Dan McGee
2008-08-25makepkg : allow to specify a download filenameXavier Chantry
A source entry can now have the following form, to specify a different filename : "filename::http://path/to/file" Of course, the old syntax is still supported : "http://path/to/file" And as before, in the second case, the filename used is simply "file". This fixes FS#11292, because handling multiple source files with the same name is now possible (just choose a different filename). But it will also allow to deal much more nicely with funny url like this by using a sane filename (and unfortunately, there are quite a few) : http://www.vim.org/scripts/download_script.php?src_id=6992 Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-25makepkg.conf : some info / docs adjustementsXavier Chantry
After commit 7865fb9af487, info pages are now treated like man pages. This means even with !docs, info pages will still be included. And including info pages was the main reason the docs option was enabled by default recently. So this is now longer needed, and we can revert back to !docs by default for disabling gigantic html pages and other docs. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Remove DB_COMPRESSION and DB_CHECKSUMS from makepkg.confXavier Chantry
DB_COMPRESSION was only used in repo-add and DB_CHECKSUMS was not used anywhere. This also removes the dependency on makepkg.conf in repo-add, so repo-add no longer needs to source makepkg.conf And instead of DB_COMPRESSION, it seems better to just check the extension of the repository file. It does not make sense to have a tar.gz file with a tar.bz2 extension or whatever. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-08-23Treat info pages like man pagesAllan McRae
As far a package building is concerned, info pages need to be treated in the same fashion as man pages in that they both can be compressed. This separates them from other forms of documentation and so it makes sense to make that distinction within makepkg. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-07-20Make strip paths configurableAllan McRae
This patch introduces a new STRIP_DIRS makepkg.conf option to change makepkg's search path when stripping binaries. Original work by: Thomas Bächler <thomas@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-06-19makepkg.conf: make keeping docs the defaultDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-16Add zipman makepkg option.Chantry Xavier
All other steps in tidy_install function were already controlled by an option in makepkg.conf, so this patch adds an option for the man page compression step too. This will allow to keep man pages uncompressed, which is required for some special meta man page, like the zshall one (see FS#4580). Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-10makepkg: Support for resuming source downloadsRoman Kyrylych
Download to *.part and remove the suffix if successful, thus md5sums will be checked only for complete files, and next time makepkg will resume downloading of partial file instead of complaining about invalid md5sums. Old DLAGENTS format is still supported. Late fix: Do not try to download %u first The output of grep was not suppressed, thus the output of get_downloadcmd was wrong because of extra line at the beginning that contained an unsubstituted (with %o and %u) entry from DLAGENTS. Signed-off-by: Roman Kyrylych <roman@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2007-12-29doc: rename manlink macro to linkmanDan McGee
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock Asciidoc configuration: @@ -149,7 +153,10 @@ # Inline macros. # Backslash prefix required for escape processing. # (?s) re flag for line spanning. -(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + +# Explicit so they can be nested. +(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])= + # Anchor: [[[id]]]. Bibliographic anchor. (?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3 # Anchor: [[id,xreflabel]] This default regex now matches explicit values, and unfortunately in this case manlink was being matched by just 'link', causing the wrong inline macro template to be applied. By renaming the macro, we can avoid being matched by the wrong regex. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-16Man page revision timeDan McGee
Spruce up the asciidoc formatting, fix a few issues that we had. Formatting now looks pretty good in both the manpage output and the XHTML output. Also added some options that we have changed since 3.0, and a few wording updates, etc. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-09Asciidoc updates- make it pretty, fix build, etc.Dan McGee
* Fix up the target so we rebuild the manpages when we edit the corresponding text file. * Add vim modelines to all of the asciidoc files ensureing the right syntax highlighting is used and we have expandtabs turned off. * Start making a few small changes to PKGBUILD.5 to make it pretty in both HTML and manpage format output. * Fix the manlink macro to include the manpage section in the link. Signed-off-by: Dan McGee <dan@archlinux.org>
2007-07-09Add Synopsis section to man 5 pages.Andrew Fyfe
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
2007-07-09Convert the remaining man pages to asciidoc.Andrew Fyfe
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>