Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2012-02-13Allow specifying shell for running scriptletsAllan McRae
Some distributions insist on using bash specific commands in their install scripts under the assumption that "sh" is a symlink to bash. This can causes issues if (e.g.) their users what to change sh to point at another shell, such as dash, that does not support these features. Add a configure option to explicitly set the shell being used to run install scripts. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-114.0.2 release updatesv4.0.2Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/diskspace.c src/pacman/util.h
2012-01-23lib/dload: enforce usage of TCP keepalivesDave Reisner
This is particularly important in the case of FTP control connections, which may be closed by rogue NAT/firewall devices detecting idle connections on larger transfers which may take 5-10+ minutes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19Add diskspace checking support for Solaris/IllumosDan McGee
Was able to get my hands on one of these boxes today, so add yet another new way of doing this. I'm glad these calls are so standardized. This was compile tested on Linux and Illumos and seems to still be working in both places. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-28makepkg: calculate exact total file sizeAllan McRae
The current calculation of the total file size for a package using "du" suffers from issues in portability and correctness. Especially on btrfs, this can result in clearly wrong package information such as: Download Size : 14684.29 KiB Installed Size : 7628.00 KiB Use an approach based on "stat" to calculate total file size. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-08Make automake generate silent rules by defaultDan McGee
This will require you to pass 'V=1' if you want the previous, more verbose output. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-12-07Add 'silent-rules' to automake setup in configure.acDan McGee
This is awesome, and I don't know why we haven't already done this. It gives us the much more less verbose make output in a few different ways: * If you run `make V=0`, you will get the quiet output. * If you run `./configure --enable-silent-rules`, the quiet output is the default; verbose output can be had by passing V=1 to make. make[3]: Entering directory `/home/dmcgee/projects/pacman/lib/libalpm' CC add.lo CC be_local.lo CC be_package.lo CC be_sync.lo CC delta.lo ..... Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-16Merge branch 'maint'Dan McGee
2011-11-16Add helper method for creating and opening archive objectDan McGee
This moves the common setup code of about 5 different callers into one method. Error messages will now be common and shared in all places; several paths did not have any messages at all before. In addition, we now pick an ideal block size for the archive read based off the larger value of our default buffer size or the st.st_blksize field. For a filesystem such as NFS, this is often much larger than the default 8192- values such as 32768 and 131072 are common. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-11-13Updates in preparation for 4.0.1 releaseDan McGee
Bump the version, update the translation template files, and fill in NEWS with relevant commits and changes since 4.0.0. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-13Remove mcheck.h supportDan McGee
When was the last time anyone used this? That's what I thought. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Bump version to 4.0.0v4.0.0Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-22Update configure.ac version to rc2Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-18configure: Fix quoting in SEDINPLACE on DarwinDave Reisner
single quotes expanded to nothing, leaving us with a command that assumed the sed expression was the backup suffix. Use a pair of escaped double quotes, which survives automake and ends up properly in makepkg. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-16configure.ac: add checks for more types, functions and headersAllan McRae
This covers most types, functions and headers that we use in the code base. Currently we do not use any of these checks, but it is useful to have the configure output when looking at build issues on other peoples systems. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Bump version to 4.0.0rc1v4.0.0rc1Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11Merge branch 'maint'Dan McGee
Conflicts: scripts/repo-add.sh.in
2011-08-11configure: simplify CARCH generation madnessDan McGee
Rather than a hardcoded list of only a few select architectures (of the 250+ case statements in config.guess), simply define CARCH to be the first component of the "target triplet". This introduces one "regression"- powerpc will no longer become ppc. However, this is easily worked around in downstream distros if wanted. This was the only CPU architecture with this oddity so it was felt worth the price to make this change. Note that 'ppc64' wasn't handled in this same odd fashion before anyway. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-11build: remove mucking with CARCHFLAGSDan McGee
We've never received an update to this, and gcc has sane defaults out of the box anyway, as do most projects in their build systems. Remove the magic here and just let downstream distros handle any changes or additions necessary, as we already do for LDFLAGS. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-093.5.4 release preparationv3.5.4Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-08-09pacman/util: flush terminal input before reading responseDave Reisner
Addresses FS#20538 Conflicts: src/pacman/util.c Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit 9477abc3591905a20acbfe7b8ce7832617d72701)
2011-07-18configure: output more compile settingsAllan McRae
Add information on CPPFLAGS, LDFLAGS and LIBS to the end of the configure output. This is very helpful in tracing issues when adjusting the configure file and also will allow us to more easily replicate any issues discovered due to a users build environment. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-23po/: split into scripts/po/ and src/pacman/po/Dan McGee
This is the first step at separating the pacman message catalog and the scripts message catalog. Makefiles, configure.ac, and other such files are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of scripts is also adjusted. Note that no actual pot or po files get changed here; these will get pruned in a future commit so each catalog contains only the necessary messages. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-23Let configure gettext setup know we use ngettext()Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-06-02Merge branch 'maint'Dan McGee
Conflicts: src/pacman/callback.c
2011-06-023.5.3 release preparationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-27configure: add output showing what libraries will be usedDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-27Allow conditional compilation with GPGMEDan McGee
This makes it possible to omit usage of -lgpgme, just as we can do for -lcurl and -lcrypto. Thanks to Rémy Oudompheng for an initial stab at this. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-20Merge branch 'maint'Dan McGee
2011-04-18Final updates for 3.5.2 releasev3.5.2Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-04-02configure.ac: we use fabs now so -lm is neededXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-28pacman/util: flush terminal input before reading responseDave Reisner
Addresses FS#20538 Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23buildsys: use libcurl's m4 macro for buildtime detectionDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Integrate GPGME into libalpmDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-23Merge branch 'maint'Dan McGee
2011-03-23Bump version to 3.5.1Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-16Merge branch 'download'Dan McGee
2011-03-16Bump pacman versionsv3.5.0Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-03-09Remove all traces of libfetchDave Reisner
Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-09Add configure.ac option for --with-curlDave Reisner
To avoid breaking compilation, fetch defaults to 'no', and curl defaults to 'check'. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-02-11Check mountpoint read-only status when checking spaceDan McGee
This is a bit of a stopgap solution for the problem, but an easier one than revamping the file conflict checking code to support the same stuff. Using some more gross autoconf magic, figure out which struct field we need to look at to determine read-only status and store that on our mountpoint struct. If we find out we needed this partition after calculating size requirements, then toss an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'maint'Dan McGee
2011-01-213.4.3 release preparationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Remove need for floating point division in backendDan McGee
All of these can be done with integer division; the only slightly interesting part is ensuring we round up like before with calling the ceil() function. We can also remove the math library from requirements; now that the only ceil() calls are gone, we don't need this anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Use limits.h for PATH_MAXAllan McRae
We use PATH_MAX everywhere by including limits.h so there is no point in doing a check for it in a different header when dealing with FreeBSD's libfetch. Also, remove autoconf check for strings.h header as it is not used anywhere. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Detect undefined PATH_MAXAllan McRae
POSIX does not require PATH_MAX be defined when there is not actual limit to its value. This affects HURD based systems. Work around this by defining PATH_MAX to 4096 (as on Linux) when this is not defined. Also, clean up inclusions of limits.h and remove autoconf check for this header as we do not use macro shields for its inclusion anyway. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-15Merge branch 'maint'Dan McGee
2010-12-12Update news and bump versionsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Refactor statfs/statvfs type checkDan McGee
Turn it into a configure-type typedef, which allows us to reduce the amount of duplicated code and clean up some #ifdef magic in the code itself. Adjust some of the other defined checks to look at the headers available rather than trying to pull in the right ones based on configure checks. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>