Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2011-02-11Check mountpoint read-only status when checking spaceDan McGee
This is a bit of a stopgap solution for the problem, but an easier one than revamping the file conflict checking code to support the same stuff. Using some more gross autoconf magic, figure out which struct field we need to look at to determine read-only status and store that on our mountpoint struct. If we find out we needed this partition after calculating size requirements, then toss an error. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-22Merge branch 'maint'Dan McGee
2011-01-213.4.3 release preparationDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-01-10Remove need for floating point division in backendDan McGee
All of these can be done with integer division; the only slightly interesting part is ensuring we round up like before with calling the ceil() function. We can also remove the math library from requirements; now that the only ceil() calls are gone, we don't need this anymore. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Use limits.h for PATH_MAXAllan McRae
We use PATH_MAX everywhere by including limits.h so there is no point in doing a check for it in a different header when dealing with FreeBSD's libfetch. Also, remove autoconf check for strings.h header as it is not used anywhere. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-29Detect undefined PATH_MAXAllan McRae
POSIX does not require PATH_MAX be defined when there is not actual limit to its value. This affects HURD based systems. Work around this by defining PATH_MAX to 4096 (as on Linux) when this is not defined. Also, clean up inclusions of limits.h and remove autoconf check for this header as we do not use macro shields for its inclusion anyway. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-15Merge branch 'maint'Dan McGee
2010-12-12Update news and bump versionsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Refactor statfs/statvfs type checkDan McGee
Turn it into a configure-type typedef, which allows us to reduce the amount of duplicated code and clean up some #ifdef magic in the code itself. Adjust some of the other defined checks to look at the headers available rather than trying to pull in the right ones based on configure checks. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2010-12-12Add functions to calculate approximate disk usage by packagesAllan McRae
Two helper function are added to calculate the disk usage from packages that are either currently installed on the system or from a package archive. Some minor approximations have been made: 1. Size for directories is not considered when removing a package from the filesystem to avoid multiple counting across packages. Also, these are reported to take zero size while installing. 2. Symlinks are reported to contribute zero size towards removal as libarchive reports them to have zero size for install. 3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards usage on dbpath on install, but their size is not counted on package removal. 4. No handling of extra size needed for .pacsave/.pacnew files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add function for listing system mount pointsAllan McRae
Add a mount_point_list() function that attempts to portably obtain a list of system mount points and a struct to hold needed mount point information. Abort the transaction if we are unable to determine the mount points. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Remove AC_TYPE_SIGNAL usageDan McGee
This macro is deemed unnecessary by even the autoconf guys, so we really don't need to use it. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12dirent usage cleanupDan McGee
We were including the header in a lot of places it is no longer used. Additionally, use the correct autoconf macro for determining whether d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Fix bash shell location checkDan McGee
BASH is defined when you are actually using bash during configure, which sucks because it ends up being '/bin/sh', messing up all of our scripts. Change the name of the variable we use in configure, and also ensure we get a full path to the executable by using AC_PATH_PROGS rather than AC_CHECK_PROGS. Finally, change the variable name everywhere we use it. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Use sysconfdir, localstatedir, BASH instead of hardcoded valuesNezmer
This applies to contrib/ files, our scripts, and the documentation. Dan: fix 'make clean' in contrib/ directory. Signed-off-by: Nezmer <git@nezmer.info> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-11Only check for function if we are using libfetchDan McGee
We did this check unconditionally, rather than only doing it if we were actually going to build and run with libfetch. This is safe because we would have already bailed if libfetch was explicitly requested but not found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-05Merge branch 'maint'Dan McGee
2010-10-05Check for python-2.7Allan McRae
Add python-2.7 to the list of checked versions of python and add a check for a python2 binary before resorting to the unversioned python binary. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-27Merge branch 'build-system'Dan McGee
2010-09-27Add FORTIFY_SOURCE supportAllan McRae
Adds a check for the minimum mainline GCC version for FORTIFY_SOURCE support and enables -D_FORTIFY_SOURCE=2 by default when building with --enable-debug. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-09-23Update build system (automake, autoconf, libtool)Dan McGee
Unfortunately this patch is hard to split up into smaller chunks. Our build system and the associated automake/autoconf/libtool macros has been left untouched for a while, and could use a refresher. * Upgrade ltmain.sh to the latest version * Move away from a huge acinclude.m4 directory to using individual files in the m4/ subdirectory, suggested by upstream automake documentation * Update all macros to their latest available version * Adjust Makefile.am and autogen.sh to accommodate m4/ subdirectory Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-06Fix libfetch configure checkingDan McGee
I don't know what I tested in commit 3e7b90ff6950, but it definitely wasn't working as advertised. Fix the checks in the source code itself to match the right define (HAVE_LIBFETCH), as well as make sure the configure check defaults to looking for the library but not bailing if it could not be found. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Clean up libfetch checking in configureDan McGee
Model it after the new OpenSSL check, and have it be a bit more useful. If you do not explicitly pass a command line option, it will be linked if available but will not error out if it is missing. Also bump the version to that where connection caching was introduced as we use these new features in the codebase. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-02Use OpenSSL MD5 crypto functions if availableDan McGee
I've noticed my Atom-powered laptop is dog-slow when doing integrity checks on packages, and it turns out our MD5 implementation isn't near as good as that provided by OpenSSL. Using their routines instead provided anywhere from a 1.4x up to a 1.8x performance benefit over our built-in MD5 function. This does not remove the MD5 code from our codebase, but it does enable linking against OpenSSL to get their much faster implementation if it is available on whatever platform you are using. At configure-time, we will default to using it if it is available, but this can be easily changed by using the `--with-openssl` or `--without-openssl` arguments to configure. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-09-01Merge branch 'maint'Dan McGee
2010-09-013.4.1 version bumpDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-07-07Remove DBEXT usageAllan McRae
With commit 5dffef78, the repo database always has a symlink of the form reponame.db. Use that filename and let libarchive determine the compression type. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-30makepkg: try standard paths for coreutils duAllan McRae
Attempt to find "du" from coreutils in the standard paths and if not revert to the version in the users PATH. Using the full path prevents issues such as FS#19932, where a different and incompatible version of du is put earlier in the users path. Signed-off-by: Allan McRae <allan@archlinux.org>
2010-06-17Revert disabling of make in doc/ dir by defaultDan McGee
This is a partial revert of commit d44e5099. By making disabling docs the default, it presents all sorts of problems- namely anyone who builds from a tarball and isn't careful enough to include '--enable-doc' will get an install without any manpages at all. Remember that make includes both 'build' and 'install' steps. The warning introduced by the commit is kept, so we do not lose all its benefits, but I am not happy to see regressions introduced in packaging and installing of this piece of software. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-16Add test/util directory as necessary to build filesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-04Bump configure.ac versions for 3.4.0 releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-06-02Move pacman test suiteAllan McRae
Move the test suite to test/pacman in order to make a logical location for a future makepkg test suite. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-18configure.ac : disable doc by default and check for asciidocXavier Chantry
This is a complaint that has been reported many many times. By default, docs are enabled and there is no check for asciidoc, so anyone building from git will see their build fail. We cannot do a strict check for asciidoc because released source tarballs have man pages already built, and it should be possible to install them without having asciidoc. This patch attempts to improve the situation in two ways : 1) disable doc by default 2) print a warning if docs are enabled but asciidoc is not installed Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-18Allow to include a path containing wildcardsMarc-A. Dahlhaus
Dan: line wrapping and man page touchup. Signed-off-by: Marc-A. Dahlhaus <mad@wol.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-05-04Fix up the cross-compilation patch library lookupDan McGee
Don't explicitly add things to the list that might not need to be there, and get the fallback list of libraries correct. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-25Fix cross-compilation issues with git and libfetchMatthias Lanzinger
This patch fixes 2 issues I encountered when cross-compiling pacman. First is the test for libfetch which requires explicit linking to all libraries libfetch depends on. The other problem results from the AC_CHECK_PROGS test for git. This test will stop configure with an error when cross-compiling. The fix moves the call to AC_CHECK_PROG so that is only called of --enable-git is actually set. Signed-off-by: Matthias Lanzinger <mlaenz@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-03-14makepkg: make strip options configurableCedric Staniewski
The newly added variables STRIP_BINARIES, STRIP_SHARED and STRIP_STATIC, that are set in makepkg.conf, specify the strip options used on binaries and shared and static libraries. In addition, files are now stripped more aggressively by default. Implements FS#13592 the way it was suggested by Allan in the comments. Signed-off-by: Cedric Staniewski <cedric@gmx.ca> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-11-10Necessary updates for 3.3.3 releasev3.3.3Dan McGee
Should cover everything worth mentioning in NEWS, plus the version number bumps as usual. Signed-off-by: Dan McGee <dan@archlinux.org>
2009-10-043.2.2 release changesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-23repo-add: make sure we get size of target fileDan McGee
If the package we were adding was a symlink, we stuck the symlink size in the database rather than the size of the file it referred to. Whoops! Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-16Updates in prep for 3.3.1 releaseDan McGee
Bump versions in configure.ac; update NEWS accordingly Signed-off-by: Dan McGee <dan@archlinux.org>
2009-09-06Configure: Check if libfetch version is >= 2.21Henning Garus
Commit 6f97842 started using libfetch's conditional GET. This requires libfetch to be version 2.21 or greater. Change configure.ac to check for the existence of the last_modified field in the url struct, which was introduced with libfetch 2.21. Signed-off-by: Henning Garus <henning.garus@gmail.com> [Xav : moved AC_CHECK_MEMBER outside of AC_CHECK_LIB] Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-18re-add -g CFLAGS with --enable-debugXavier Chantry
after commit 8feccaed7861010caefa4f7b9824a6, -g was no longer added with --enable-debug. So if CFLAGS was set (if unset, it defaults to -g -O2) and didn't contain -g, we ended with no debug symbols.. Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-08-01Version bump for 3.3.0Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-05-11makepkg: several small fixesAllan McRae
1) Do not attempt to strip compressed binaries Original-work-by: Marc - A. Dahlhaus <mad@wol.de> 2) Add "\" in "GPL\'ed" so quote mark does not break source code highlighting 3) Add local to docdir paths in makepkg.conf for consistency 4) Use full path to sed in MacOSX in case users have GNU sed earlier in path Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-04-26makepkg: make in-place sed portableAllan McRae
Do a sed replacement in-place is not very portable. On Mac OSX and BSDs, the syntax is "sed -i ''" where as with GNU sed the command is "sed -i''" or just "sed -i". This patch detects which command should be used during configure. Credit to Kevin Barry who researched this issue and provided a patch to work around this using temporary backup files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-28Update checks for python in configureDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2009-02-16configure.ac: use full path of stat for Mac OS XKevin Barry
Change configure.ac to use the full path of stat when on darwin/mac. This is needed for situations when a user installs the GNU/coreutils and places it in their path before /usr/bin, but the SIZECMD is already configured for Darwin's version of stat. Signed-off-by: Kevin Barry <barryk gmail com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-12Remove libdownload support and fix libfetch one.Xavier Chantry
Aaron said to consider libdownload a dead project so libdownload support was removed to more easily fix libfetch one (otherwise many ifdef needed). There was no direct replacement for ferror to detect an error while downloading. So instead, I added a check at the end to see if the file was fully downloaded, which is just a small chunk of code taken from here: http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/net/libfetch/files/fetch.c?only_with_tag=MAIN Signed-off-by: Xavier Chantry <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2009-01-06Merge branch 'maint'Dan McGee