| Age | Commit message (Collapse) | Author |
|---|
|
We've unofficially agreed to raise our minimum supported bash version to
4.1, and since added features that require it. Additionally, an earlier
commit adds a syntax check to the builds of scripts/ and contrib/ which
could conceivably fail with an earlier shell. Therefore, make this a
hard requirement of the build process.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This will replace our current options parser used in pacman-key,
makepkg, and ideally elsewhere. It follows heuristics closer to that of
GNU getopt long (and thus pacman itself), with the exception that it
does not allow for options with optional arguments. Due to the way this
parser will be used, this sort of functionality will not be needed.
Instead of relying on eval+set, options are normalized into an array,
OPTRET, which callers should expect to be populated after returning from
parseopts. This avoids problems with quotes and spaces in arguments,
assuming that the user quotes properly when passing into the
application.
A new test harness for parseopts is added in test/scripts.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We're not linking to libssl, only libcrypto. -Wl,--as-needed will get
rid of this, but there's no sense in checking for and linking against a
library we don't need.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This adds a bunch of warning flags to the list used when compiling.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
- Use LT_INIT over AC_PROG_LIBTOOL, as the latter is a deprecated alias
for the former.
- Remove redundant macros which are called implicitly by LT_INIT.
- Remove unneeded AC_PROG_CXX call (we don't use c++ anywhere)
- Add AC_CONFIG_MACRO_DIR([m4]) -- not strictly necessary, but added for
consistency with autogen.sh and Makefile.am
ref: http://www.gnu.org/software/libtool/manual/html_node/LT_005fINIT.html
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Continue the trend of not touching the environment CFLAGS, ensuring that
the user always has the final say.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Instead of directly modifying CFLAGS, use config.h for its intended
purpose.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
- handle gpgme libs and cflags separately rather than appending to
CFLAGS and LDFLAGS
- be consistent in AC_LINK_IFELSE check for gpgme 1.3.0 (though this is
irrelephant since we don't actually run)
- be consistent with usage of "have" and "with" variables (this
actually ends up reducing SLOC)
- when voluntary detection fails, unset GPGME_CFLAGS and GPGME_LIBS
- when requested support fails the version check, complain about the min
version.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This also introduces a versioned dependency of >=2.8.0.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
We use interfaces first introduced in gpgme-1.3.0 so test we have
at least that version.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The initial patch to implement this achieved nothing apart from
adding a configure option. This patch makes that configure option
do what it advertises.
Note that specifing any shell apart from /bin/sh causes testsuite
failures as /bin/sh is the only shell in the testing environment.
Bug-found-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/signing.c
lib/libalpm/sync.c
|
|
This reverts commit b264fb9e9ddcc31dc8782390309421965e507383.
With our "fix" of sleeping for BTRFS, we can go back to using `du` to
calculate total installed size.
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/be_package.c
|
|
Passing the "-L" flag to stat means we get the size of the file
being pointed to for symlinks instead of the size of the symlink.
Keep "-L" usage in repo-add as we want the actual size of the
package/delta/signature there.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Conflicts:
lib/libalpm/sync.c
src/util/pactree.c
|
|
Fixes compilation on Gentoo, where CPPFLAGS=-I/usr/include/gpgme is
necessary.
The AC_SYS_LARGEFILE macro call has to be before the GPGME checks,
otherwise the GPGME header gives an error about ABI incompatibilities.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was the only variable of its kind when a define was done on the
compiler command line. Move it into config.h instead.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some distributions insist on using bash specific commands in their
install scripts under the assumption that "sh" is a symlink to bash.
This can causes issues if (e.g.) their users what to change sh to
point at another shell, such as dash, that does not support these
features. Add a configure option to explicitly set the shell being
used to run install scripts.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/diskspace.c
src/pacman/util.h
|
|
This is particularly important in the case of FTP control connections,
which may be closed by rogue NAT/firewall devices detecting idle
connections on larger transfers which may take 5-10+ minutes.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Was able to get my hands on one of these boxes today, so add yet another
new way of doing this. I'm glad these calls are so standardized. This
was compile tested on Linux and Illumos and seems to still be working in
both places.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The current calculation of the total file size for a package using "du"
suffers from issues in portability and correctness. Especially on btrfs,
this can result in clearly wrong package information such as:
Download Size : 14684.29 KiB
Installed Size : 7628.00 KiB
Use an approach based on "stat" to calculate total file size.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will require you to pass 'V=1' if you want the previous, more
verbose output.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is awesome, and I don't know why we haven't already done this. It
gives us the much more less verbose make output in a few different ways:
* If you run `make V=0`, you will get the quiet output.
* If you run `./configure --enable-silent-rules`, the quiet output is
the default; verbose output can be had by passing V=1 to make.
make[3]: Entering directory `/home/dmcgee/projects/pacman/lib/libalpm'
CC add.lo
CC be_local.lo
CC be_package.lo
CC be_sync.lo
CC delta.lo
.....
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This moves the common setup code of about 5 different callers into one
method. Error messages will now be common and shared in all places;
several paths did not have any messages at all before.
In addition, we now pick an ideal block size for the archive read based
off the larger value of our default buffer size or the st.st_blksize
field. For a filesystem such as NFS, this is often much larger than the
default 8192- values such as 32768 and 131072 are common.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When was the last time anyone used this? That's what I thought.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
single quotes expanded to nothing, leaving us with a command that
assumed the sed expression was the backup suffix. Use a pair of escaped
double quotes, which survives automake and ends up properly in makepkg.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This covers most types, functions and headers that we use in the
code base. Currently we do not use any of these checks, but it
is useful to have the configure output when looking at build issues
on other peoples systems.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
scripts/repo-add.sh.in
|
|
Rather than a hardcoded list of only a few select architectures (of the
250+ case statements in config.guess), simply define CARCH to be the
first component of the "target triplet".
This introduces one "regression"- powerpc will no longer become ppc.
However, this is easily worked around in downstream distros if wanted.
This was the only CPU architecture with this oddity so it was felt worth
the price to make this change. Note that 'ppc64' wasn't handled in this
same odd fashion before anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We've never received an update to this, and gcc has sane defaults out of
the box anyway, as do most projects in their build systems. Remove the
magic here and just let downstream distros handle any changes or
additions necessary, as we already do for LDFLAGS.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Addresses FS#20538
Conflicts:
src/pacman/util.c
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 9477abc3591905a20acbfe7b8ce7832617d72701)
|
|
Add information on CPPFLAGS, LDFLAGS and LIBS to the end of the
configure output. This is very helpful in tracing issues when
adjusting the configure file and also will allow us to more
easily replicate any issues discovered due to a users build
environment.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is the first step at separating the pacman message catalog and the
scripts message catalog. Makefiles, configure.ac, and other such files
are adjusted accordingly, as well as renaming files. The TEXTDOMAIN of
scripts is also adjusted.
Note that no actual pot or po files get changed here; these will get
pruned in a future commit so each catalog contains only the necessary
messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
src/pacman/callback.c
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|