Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-04Update copyright years for 2016Allan McRae
make update-copyright OLD=2015 NEW=2016 Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04zsh_completion: add -q/--quiet for -Q/-SDaniel Hahler
This should also be added for "-Fh", but that is missing completely in zsh_completion. 1: https://lists.archlinux.org/pipermail/pacman-dev/2015-November/020538.html Signed-off-by: Daniel Hahler <git@thequod.de> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Replace mktemp's --tmpdir option with shell code.Alastair Hughes
bacman and updpkgsums used GNU mktemp's --tmpdir option, which is not supported by some other implementations (including busybox). Replace that with shell code. Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2016-01-04Do not warn about missing files in NoExtractAllan McRae
The CheckSpace option checks the size of all files in a package being replaced and gives a warning when it can not read the file. However, files in NoExtract are expected to be missing and should not be warned about. Fixes FS#47470. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15makepkg: Output full URL in case of download failureFlorian Pritz
Most entries in $sources contain variables so finding out why a URL fails to download is hard because one has to manually replace the variables when looking at the PKGBUILD. Simply output the full URL here so that it can be easily seen what is wrong. Old: ==> ERROR: Failure while downloading example-1.2.4.tar.gz New: ==> ERROR: Failure while downloading http://example.org/releases/1.1/example-1.2.4.tar.gz With the new format it is much more obvious that the directory name is the culprint (1.1 vs 1.2) while the old one would not display that information. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15alpm: Abort ASAP on failure in pre-transaction hooksOlivier Brunel
There is no need to run any/remaining pre-transaction hooks as soon as a failure has occured, which will lead to aborting the transaction. So if an error occured during the first phase (reading directories/parsing files), or as soon as a hook flagged abort_on_fail does fail, we stop processing them and return. (For post-transaction hooks, all hooks are run regardless since there's no aborting.) Signed-off-by: Olivier Brunel <jjk@jjacky.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15makepkg: run pkgver() and prepare() with --noextractAllan McRae
Modifications made to the source before running with --noextract may alter the version string returned by pkgver(). Always run this function if present and check build status before proceeding. Fixes FS#46800. Also run prepare() when --noextract is used (unless --noprepare is specified). Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15Give error message when --files will do nothingAllan McRae
Point people towards the help when using "pacman -F" or "pacman -F foo". Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15alpm-hooks: add Description fieldAllan McRae
The "Description" field allows a hook to provide a some text for frontends to use in describing what the hook is doing. For example: Description = updating info page directory Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15Show progress processing hooksAllan McRae
Introduces the ALPM_EVENT_HOOK_RUN_{START,DONE} events that are triggered at the start and end of running an individual hook. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15Add ALPM_EVENT_TRANSACTION_{START,DONE} eventsAllan McRae
This provides a way to detect when the processing of package changes starts, allowing pacman to delineate hook output and package installation/removal output. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-15Add events ALPM_EVENT_HOOK_{START,DONE}Olivier Brunel
Add events to let frontends know when hooks are being processed (and when it's done), as that might be useful to update the UI. Signed-off-by: Olivier Brunel <jjk@jjacky.com>
2015-12-15Collect all triggered hooks before running themAllan McRae
Having a first pass that checks which hooks are triggered followed by a second pass of the triggered hooks allows us to only provide output when a hook is actually triggered. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-09Pull translations from Transifex and prepare for next releaseAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06alpm_run_chroot: remove dead codeAndrew Gregory
Removes a leftover error message from when fdopen and fgets were used to read from the pipe. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06makepkg: record build information in .BUILDINFOAllan McRae
This information can be used to reproduce build conditions, which can then be used to determine if a package builds reproducibly. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06makepkg: add whirlpool to the list of hashing algorithmsLuke
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06alpm_initialize: Fix double slash in sys hook dir pathDavid Macek
The path of the default system hook directory was created by concatenating `myhandle->root` (usually "/"), and SYSHOOKDIR (usually "/usr/share/libalpm/hooks/"), resulting in "//usr/share/libalpm/hooks/". Fix this by skipping the initial slash from SYSHOOKDIR. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06db_update: always clear db flags after updateAndrew Gregory
Signature downloading and DB validation was being based on the most recent download status for the DB. If a DB successfully downloaded but a signature did not, db_update would move to the next server. If the next server tried does not have a more recent copy of the DB, db_update would not download the DB again and would forget that the DB had previously been updated. In this case it would skip validation entirely, leaving an updated DB with the original validation status. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-06Updated the documentation for makepkg's -L option.Alastair Hughes
At some point back in 2009, logging was expanded to cover all of the packaging functions, but the man page was not updated to reflect that. Fix that! Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05remove soft interrupt handler before cleanupAndrew Gregory
The soft interrupt handler dereferences config, causing a segfault if it is called during cleanup. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05extract soft interrupt handlersAndrew Gregory
Delays handler setup until after config is set to a valid value to avoid a segmentation fault. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05extract SIGSEGV handlerAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05extract SIGWINCH handlerAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05move signal handlers to sighandler.[ch]Andrew Gregory
Signals are special because they run asynchronously, making them non-trivial to handle correctly. Move the handlers a separate file to offset them from the normal code and make them easier to separate into individual functions without further cluttering pacman.c Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05avoid unsafe functions in signal handlerAndrew Gregory
signal(7) lists a set of functions that can safely be called from within a signal handler. Even fileno and strlen are not guaranteed to be safe. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05remove SIG_IGN check when setting signal handlerAndrew Gregory
Our signal handler provides a way to gracefully interrupt a transaction and should always be set. The check appears to have originally been copied directly from the glibc manual. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05do not catch SIGTERMAndrew Gregory
On SIGTERM pacman was exiting immediately, even in the middle of a transaction. In this case we should leave the lock file in place as an indication that the database may not be in a consistent state. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05pacman: exit without memory cleanup on signalsAndrew Gregory
Memory allocation/deallocation functions are not safe to call from signal handlers. Just remove the lock file if there is one and exit immediately. Fixes: FS#46375, FS#45995, FS#47011 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05add and expose alpm_unlockAndrew Gregory
alpm_unlock is a limited version of alpm_release that does nothing but the actual unlinking of the lock file and is therefore safe to call from signal handlers. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05handle_unlock: return 0 if lockfile == NULLAndrew Gregory
Returning -1 is useless since we don't provide any way to determine why it failed. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05skip conflicts resolved by file replacementAndrew Gregory
When replacing a file with a directory, any files inside the new directory cannot possibly exist on the filesystem and can be skipped. This allows cross-package symlink-to-directory transitions when there are files with the same name under both the symlinked directory and the new directory. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05always unlink files before extractionAndrew Gregory
libarchive will not extract a directory over an existing directory symlink, making it impossible to replace a symlink with a directory across packages. Adding the ARCHIVE_EXTRACT_UNLINK and ARCHIVE_EXTRACT_SECURE_SYMLINKS causes libarchive to unlink the existing symlink and prevents it from extracting any paths that contain a symlink, which we should not be doing anyway. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-05Detect potential conflict when symlink to directory is changing to directoryAllan McRae
When a symlink to a directory is changing to a directory, any package file inside the new directory can create an unexpected conflict with the filesystem. Reported by Neofytos and Luca from Chakra. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-12-04Add large file support CFLAGS to pkgconfig fileAllan McRae
Large file support is enabled by our configure script as required. If anything linking to libalpm does not also define large file support, there will be differences in the size of off_t which are not caught until runtime. Add the required CFLAGS to the pkg-config file so that users of libalpm know what flags are required. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-29run_chroot: always clear script output bufferAndrew Gregory
If the script output does not end in a newline there could still be data in the buffer after the poll loop. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28pacdiff: do not require DIFFPROG for -o/--outputEvangelos Foutras
Signed-off-by: Evangelos Foutras <evangelos@foutrelis.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28hooks: pass matched targets to hooksAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28allow specifying input to scriptletsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28allow arguments in hook Exec fieldsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28tap.py: replace newlines with escape sequenceAndrew Gregory
Newlines clutter tap output and can potentially confuse TAP parsers. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-28pmrule.py: add FILE_CONTENTS ruleAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild/variable: increase robustnessAllan McRae
Approach the detection of variables of the wrong type using an approach similar to that used for construction of .SRCINFO files. While doing silly things in bash could still result in false negatives, this approach should be very robust to generatinf false positives results. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: merge arch dependent variables after PKGBUILD lintingAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23makepkg: remove obsolete commentAllan McRae
Behaviour changed in commit dce82f9d. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-23lint_pkgbuild: explicitly return valueAllan McRae
Set the return value to be local and always explictly returns it. Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-11Refactor strtrim functionSilvan Jegen
Signed-off-by: Silvan Jegen <s.jegen@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-11Use correct format specifiersRikard Falkeborn
Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-05Refactor lint_source to work with earlier versions of BashAaron Campbell
Negative subscripts to indexed arrays are not supported before 4.2. However, since substring expansion works on arrays, we can specify an offset of -1 to be taken relative to one greater than the maximum index of the specified array (see Parameter Expansion section of the bash man page). This works with both Bash 4.1 and 4.2, and 4.1 is already the oldest supported by pacman. Signed-off-by: Aaron Campbell <aaron@monkey.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2015-11-04files_search: reset found for each targetAndrew Gregory
Otherwise any invalid targets following a successful match will not get an error message. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>