| Age | Commit message (Collapse) | Author |
|---|
|
Previously TotalDownload would switch the % download from per package to
overall. Meaning you had a choice of which information to dispplay.
Now with parallel downloads TotalDownload adds an extra progress bar.
There's no reason to have this an off by default feature. Let's just
make it always on.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a makepkg consumer uses a build wrapper to override compiler
flags this may lead to unreproducible packages as there is no way to
know which exact files were used for tooling that tries to reproduce
said package.
Instead of vendoring the whole used makepkg.conf file into buildinfo,
this patch adds two new properties to the .BUILDINFO file named
BUILDTOOL and BUILDTOOLVER which by default are simply makepkg's own
values. Downstream consumers may override those values: For example in
Arch Linux the devtools package can set those values and allow
reproducible builds tooling to fetch the appropriate makepkg.conf.
Signed-off-by: Levente Polyak <anthraxx@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows architecture to be multivalued. On x86-64 machines, this
could be something like:
Architecture = x86-64-v3 x86-64
We use the first specified Architecture value in mirrorlist $arch
variable replacement, as this is backwards-compatible and sane.
Original-patch-by: Dan McGee <dan@archlinux.org>
Patch-updated-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When the download estimate is over an hour the format displayed changes
from mm:ss to hh:mm:ss. This causes everything to be out of alignment
due to the extra characters.
So instead lets just go back to --:-- when the download => 100 minutes.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This pkg-config file is automatically created in the meson-uninstalled/
directory of the build tree, and points to the built artifacts there. If
this directory is added to PKG_CONFIG_PATH, it will be preferred over an
installed copy.
Making this work properly means it becomes trivially possible to build a
private copy of libalpm, and then compile other projects using it rather
than the system copy.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On Linux, SIGPOLL is a valid signal, but on systems like FreeBSD, it is
not. This patch does a preprocessor check to see if SIGPOLL is available
or not.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On Linux, signal.h is not required to have access to the signal
constants. On FreeBSD, this is not the case and requires signal.h to be
explicitly included.
This patch adds an include for signal.h in any source file that uses it.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This patch changes the behavior of meson to define configuration options
*only* when the symbol checked is present. Currently, it defines all of
them in config.h whether the symbol exists or not and the code that
looks for it doesn't check the macro's value, but whether it's defined.
Signed-off-by: Mark Weiman <mark.weiman@markzz.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
www.archlinux.org now redirects to archlinux.org.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The Arch Linux mailing lists are these days served from the lists
subdomain.
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If specified, this will be used no matter what. If not, then we check if
sudo exists and use that, or else fall back on su.
Implements FS#32621
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Broken via refactoring in commit aa6fe1160b39cd364a6595b7c9f56acb1cea3432
but for obvious reasons only one person in the last 9 years has ever
actually tried to do this. Still, it's technically correct to allow it.
Fixes FS#70254
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes: FS#69881
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Keep track of errors from servers so that bad ones can be skipped once
a threshold is reached. Key the error tracking off the hostname because
hosts may serve multiple repos under different url's and errors are
likely to be host-wide.
Implements: FS#29293.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The current gcc build from git master give different output from
readelf:
gcc-10.2.0
$ readelf "hello" --debug-dump | grep hello
<11> DW_AT_name : (indirect string, offset: 0xbfc): hello.cpp
gcc-git
$ readelf "hello" --debug-dump | grep hello
<12> DW_AT_name : (indirect line string, offset: 0x0): hello.cpp
This causes the awk statement extracting the file name to fail as it
relied on the information being in the 8th field. Instead, extract
the information from the final field.
Fixes FS#70168
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Total download callback called right before packages start downloaded.
But we already have an event for such event (ALPM_EVENT_PKG_RETRIEVE_START)
and it is naturally to use the event to pass information about expected
download size.
Signed-off-by: Anatol Pomozov <anatol.pomozov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We should not need to hardcode the path to sed as we simply don't care.
We don't check what kind of sed we found, and we're using the same one
we initially found on the PATH, which is surely still on the PATH.
At one point we did care to find the system copy of sed and hardcode it
in makepkg, because we also passed non-portable -i options to it and
makepkg needed to continue working on macOS even if some incompatible
GNU sed got installed afterward, elsewhere on the PATH. But this was
never relevant to the in-tree buildsystem script running sed.
In commit 3a814ee6bca9ee24a868c0dc032b321048a53e08 we removed even that,
so we don't need to look it up at all.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In commit 0f75ab3224141a5e8a4fe72b48b4639c83c6316b some unbalanced
quotes were added by the committer while editing an error message.
Fixes FS#69865
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
GCC's LTO implementation emits bytecodes into .o files it generates.
These bytecodes are _not_ considered stable from one release of GCC
to the next. There we need to strip the LTO bytecode out of any .o
(and .a) file that gets installed into the package.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add the 'lto' option to enable building with link time optimization
by adding '-flto' to both CFLAGS and CXXFLAGS. The 'lto' option can
be specificed both in the PKGBUILD or by setting the default in
makepkg.conf.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With the recent outages of the keyservers there is a possibility of
`--refresh-keys` failing to fetch new keys. A lot of current key
distribution is done over WKD these days, and `pacman-key` has the
ability to use it for `--recv-key`.
There was a hope `gpg` would end up supporting WKD for the refresh
functionality, but this seems to be limited to expired keys fetched
through WKD. Since this functionality isn't yet available it makes sense
to stuff it into `pacman-key`.
The current implementation looks over all available keyids in the
keyring, attempts to fetch over WKD and then fall backs to keyservers if
no email has a valid WKD available. The downside of this approach is
that it takes a bit longer to refresh the keys, but it should be more
robust as the distribution should be providing their own WKDs.
Co-authored-by: Jonas Witschel <diabonas@archlinux.org>
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This enables us to extract files in the source array and ensures that we
can decompress files if the uncompressed signature is served.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This reverts commit e348ba38814c9cc7c1c9892d0451096234dc39ab.
With the above commit we started caching the downloaded packages. Based
on some testing and, it saves ~30s in the "step_script" stage while
adding 18s for "Restoring/Saving cache". A net saving of ~10s.
With earlier commit, we no longer use an ancient image which also pulls
base-devel - thus the packages we have to download is minimal.
Now comparing the uncached "step_script", vs the cached one - it is
slowed by 2-3 seconds (1:01 -> 1:03), while we eliminate the 18s (and
growing) caching.
Tl:Dr: With up-to date image, package caching in not worth it - be that
time, disk or network wise.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The archlinux/base have been deprecated. Since we depend on base-devel
simply use archlinux:base-devel
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
buildenv is set once for build() and a second time for package(). When
using both distcc and ccache, this lead to CCACHE_PREFIX="distcc distcc"
in package(), which breaks PKGBUILDs that execute the compiler in
package() because distcc complains:
distcc[383041] (main) CRITICAL! distcc seems to have invoked itself
recursively!
Avoid causing this error by only adding "distcc" to CCACHE_PREFIX if
it's not yet there.
Signed-off-by: Matti Niemenmaa <matti.niemenmaa+git@iki.fi>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This was raising a warning during the build.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This permits storing the result of setcap during package() and applying
the resulting capabilities to the installed program. Formerly, it was
necessary to edit the binary after the fact (and thus dirty the file
according to -Qkk) by using an install scriptlet.
One problem that needs to be solved before this is useful, is preventing
the strip routine from destroying xattrs. This is taken care of in the
previous patch.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
It updates the stripped/objcopied file by creating a temp file,
chown/chmodding it, and replacing the original file. But upstream
binutils has CVE-worthy issues with this if running strip as root, and
some recent versions of strip don't play nicely with fakeroot.
Also, this has always destroyed xattrs. :/
Sidestep the issue by telling strip/objcopy to write to a temporary
file, and manually dump the contents of that back into the original
binary. Since the original binary is intact, albeit with different
contents, it retains its correct attributes in fakeroot.
Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When a package does not need to be downloaded but a signature does,
total download didn't count that towards the total.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Populating a file:// Server prevents any manually registered HTTP
servers from ever being used.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The existing CACHE_EXISTS rule takes a package, which is not suitable
for -U tests that need to be able to check for specific files.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Makes it easier to pass options when not running pactest directly.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Mostly for testing.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Running "pacman -Sc" deletes /var/lib/pacman/sync/*.files.sig due to a
wrong string length being used when checking filename suffixes in that
directory. In turn, these missing signature files cause both the
corresponding "*.files" files and their signatures being forcibly
re-downloaded again when "pacman -Sy" is executed.
Since official Arch Linux repos don't use signed database files yet, this
only affects people who use custom repos with signed database files, for
which they have set the "SigLevel" directive to "Required" or
"DatabaseRequired" in /etc/pacman.conf.
Fixes FS#66472
Signed-off-by: Pascal Ernster <pacman-dev@hardfalcon.net>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Starting the download process, even if there is nothing to actually
download, causes an error when pacman is built without curl and has no
XferCommand defined (like our test suite).
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Download-related config options are currently limited to builds with
curl. This causes compilation errors when those options are used
without an appropriate guard which often goes unnoticed because we all
use curl. Front-ends providing their own download callback may also
want to use these settings.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In 19980a61e9ed9b9a57520aaa919c40a4b5311f87 there was a msg added which
didn't get the string closed.
Signed-off-by: Morten Linderud <morten@linderud.pw>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Operations involving --sysroot and reading targets from stdin were
failing due to attempting to read targets after chrooting. Move the
chroot to happen after targets are read.
Fixes FS#68630
Signed-off-by: Allan McRae <allan@archlinux.org>
|