| Age | Commit message (Collapse) | Author |
|---|
|
-f/--force has been dead for a while, so kill it off. In addition, the
check for > 2 args is pretty useless when you do something like:
repo-add -q -q
or a more legit:
repo-add -q /path/to/mine.db.tar.gz
So instead make repo-add just return 1 when it doesn't do anything with
the database which seems to make more sense.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rather than creating no database at all, create an empty zipped tar archive
in its place. This keeps the download side of repositories a bit more sane
as a DB will always exist, and pacman handles this empty case just fine.
For this to be fully transparent, we also need to make sure repo-add and
repo-remove accept an empty "DB" as an argument, which in reality is a
completely void of files .tar.{gz,bz2,xz} archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If the package we were adding was a symlink, we stuck the symlink size in
the database rather than the size of the file it referred to. Whoops!
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Various tidying to the usage output
- change "--config <config>" to "--config <file>" to prevent wrapping in a 80 character wide terminal
- re-alphabetise options, including moving all long only opts to the end
- use same indentation for additional pacman options
- remove useless comment
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Yes, it was that bad :P
We still have memleaks left because we cannot free the error data returned
by libalpm, but pacman has the same issue.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Get them a bit more standardized across the board, as they were quite a
mess. Also note the two new translations we received for 3.3.1.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is for 3.3.0, not for 3.3.1. But since there are only like 10 messages
missing, it seems worth including now.
Signed-off-by: Christian Larsson <congacx@gmail.com>
Signed-off-by: Laszlo Papp <djszapi2@archlinux.us>
[Dan: fix some busted translation strings]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Hans-Kristian Arntzen <maister@archlinux.us>
Signed-off-by: Laszlo Papp <djszapi@archlinux.us>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Previously we only looked at the first cache directory returned by the
library. This allows us to look at all cache directories for cleaning.
In addition, change the way we do a full (-Scc) cache cleaning operation.
Instead of removing the parent directory, remove each package one-by-one as
in the -Sc case. This would be ideal for someone mounting a cache directory
over NFS, as it ensures we don't wipe out the mountpoint from underneath the
directory.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We didn't look at the return status of sync_cleandb() in sync_cleandb_all().
Make it do so and return it up the call chain.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Commit 34e1413d75 attempted to implement lazy loading of package databases.
Although it took care of my main complaint (creating the database directory
if it didn't exist), it didn't allow sync repos to be registered before
alpm_option_set_dbpath() had been called.
With this patch, we no longer compute the individual repository DB paths
until necessary, allowing full lazy loading to work as intended, and
allowing us to drop the extra setlibpath() calls from the frontend. This
allows the changes introduced in a2cd48960 (but later reverted) to be added
back in again.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Message updates made this one a bit messy, but nothing too bad.
Conflicts:
lib/libalpm/add.c
lib/libalpm/remove.c
|
|
After commit 0da96abc, pacman always asks user confirmation for -U, so it is
more coherent to doing that for -R, too.
Btw, most users use -Rs always, so they won't notice any change. In the old
code the -Ru operation was forgotten: Though it is a not "dangerous" operation,
but the target list can be changed by that, too.
Non-interactive scripts should always use --noconfirm (unexpected questions can
be asked by all transactions). [That's why we should always default to the
safest answers.]
I've also added a pkglist != NULL sanity check (because -Ru can empty target
list in trans_prepare part).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will make the code re-usable for other purpose.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
It was probably a bad idea to modify the target directly in case of
repo/pkg syntax.
Duplicating it also allows us to keep the original target string, which
is more informative when printing errors.
Also remove a duplicated error message from libalpm, and improve the
message already returned to the frontend.
$ pacman -S foo/bar
before
error: repository 'foo' not found
error: 'bar': no such repository
after
error: 'foo/bar': could not find repository for target
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
./src/pacman/package.c:
- small typo fix
./src/pacman/pacman.c:
- strdup is changed to strndup, because it's safer like in
case of config option
Signed-off-by: Laszlo Papp <djszapi2@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <giovanni@archlinux.org>
|
|
Bump versions in configure.ac; update NEWS accordingly
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add more untranslated strings, improve consistency, etc.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
After commit 774c252 the --debug output shows 5-6 "syntax error..." lines
for each package. After this patch pacman recognizes makepkgopt as a valid
key, but doesn't do anything.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This doesn't quite work, as can be seen by the pactest results:
Total = 179
Pass = 108 ( 60.34%)
Expected Fail = 5 ( 2.79%)
Unexpected Pass = 0 ( 0.00%)
Fail = 66 ( 36.87%)
If you peek inside '_alpm_db_new' when it gets called for the sync
databases, the base dbpath is still at the default value, causing things
like pactest to fail miserably. We need some further work to do fully lazy
loading, and that belongs on master, not maint.
This reverts commit a2cd48960e33043f75c81e0ecbc2d33b20b695fe.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
-int alpm_trans_sysupgrade(int enable_downgrade);
-int alpm_trans_sync(char *target);
-int alpm_trans_add(char *target);
-int alpm_trans_remove(char *target);
+int alpm_sync_sysupgrade(int enable_downgrade);
+int alpm_sync_target(char *target);
+int alpm_sync_dbtarget(char *db, char *target);
+int alpm_add_target(char *target);
+int alpm_remove_target(char *target);
* functions renaming
* add new sync_dbtarget which allows to specify the db
* repo/ syntax handling is moved to frontend
( should implement FS#15141)
* group handling is moved to backend
( see http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html )
|
|
With the help of --ask switch it is possible to test remove_unresolvable
feature, so I reverted the change of commit f2061c5f on ignore005.py with
--ask=32 added.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This basically started with this change :
/* Transaction */
struct __pmtrans_t {
- pmtranstype_t type;
pmtransflag_t flags;
pmtransstate_t state;
- alpm_list_t *packages; /* list of (pmpkg_t *) */
+ alpm_list_t *add; /* list of (pmpkg_t *) */
+ alpm_list_t *remove; /* list of (pmpkg_t *) */
And then I have to modify all the code accordingly.
|
|
This patch utilizes the power of sync.c to fix FS#3492 and FS#5798.
Now an upgrade transaction is just a sync transaction internally (in alpm),
so all sync features are available with -U as well:
* conflict resolving
* sync dependencies from sync repos
* remove unresolvable targets
See http://www.archlinux.org/pipermail/pacman-dev/2009-June/008725.html
for the concept.
We use "mixed" target list, where PKG_FROM_FILE origin indicates local
package file, PKG_FROM_CACHE indicates sync package. The front-end can add
only one type of packages (depending on transaction type) atm, but if alpm
resolves dependencies for -U, we may get a real mixed trans->packages list.
_alpm_pkg_free_trans() was modified so that it can handle both target types
_alpm_add_prepare() was removed, we use _alpm_sync_prepare() instead
_alpm_add_commit() was renamed to _alpm_upgrade_targets()
sync.c (and deps.c) was modified slightly to handle mixed target lists,
the modifications are straightforward. There is one notable change here: We
don't create new upgrade trans in sync.c, we replace the pkgcache entries
with the loaded package files in the target list (this is a bit hackish) and
call _alpm_upgrade_targets(). This implies a TODO (pkg->origin_data.db is
not accessible anymore), but it doesn't hurt anything with pacman front-end,
so it will be fixed later (otherwise this patch would be huge).
I updated the documentation of -U and I added a new pactest, upgrade090.py,
to test the syncdeps feature of -U.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When a conflict is detected, pacman asks if the user wants to remove
the conflicting package. In many cases this is a bad idea. e.g.
udev conflicts with initscripts (initscripts<2009.07).
Remove initscripts [Y/n]
This changes the query to [y/N].
The --noconfirm behavior has been also changed, because it chooses the
default answer. Since the yes answer is more interesting in our pactests
dealing with conflicts, I inserted '--ask=4' to all of them with one
exception: sync042.py tests the no answer.
(I also fixed a typo in sync043.py)
Original-work-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
This re-implements the --ask option which was removed in commit
1ff8e7f364a9f640ada7526384646d510ac29967.
This option does not have to be exposed to the user (help,doc,etc), but is
very very useful for pactest if we want to have more coverage there.
This was rewritten in a smarter way, without code duplication. And with a
different behavior : this option is now only used to inverse default
behavior to questions.
We still use bit operations based on the following struct :
/* Transaction Conversations (ie, questions) */
typedef enum _pmtransconv_t {
PM_TRANS_CONV_INSTALL_IGNOREPKG = 0x01,
PM_TRANS_CONV_REPLACE_PKG = 0x02,
PM_TRANS_CONV_CONFLICT_PKG = 0x04,
PM_TRANS_CONV_CORRUPTED_PKG = 0x08,
PM_TRANS_CONV_LOCAL_NEWER = 0x10,
PM_TRANS_CONV_REMOVE_PKGS = 0x20,
} pmtransconv_t;
for each conv matched, the default answer is inversed.
--ask 0 : all default answers are preserved
--ask 4 : only conflict question is inversed
--ask 63 : all questions are inversed (63 == 1+2+4+8+16+32)
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Sometimes "foo conflicts with bar" information is not enough, see this
thread: http://bbs.archlinux.org/viewtopic.php?id=77647. That's why I added
a new reason field to our pmconflict_t struct that stores the packager-
defined conflict that induced the fact that package1 conflicts with
package2.
I modified the front-end (in callback.c, sync.c, upgrade.c) to print this
new information as well.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
The main reason for this change is that scripts could not catch the removed
targets with -S --noconfirm (the return value was 0). So the effect of a
pacman command may have differed from the expected one. Moreover, for my
taste the default no answer is better (I wanted to install the specified
targets, not a subset of them).
I had to change some pactest files as well, because now the default behavior
is not to remove unresolvable targets. In fact, the only pactest file that
tested this feature was ignore005.py.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|