| Age | Commit message (Collapse) | Author |
|---|
|
Creating the working directory can waste a lot of space.
Fixes FS#31221.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
* For any vcs other that git, the fall through resulted in being handled by the
code for std url, hence fragments were being left on.
* Handle vcs urls than end in a slash correctly, eg http://example.com/project/
Signed-off-by: Gary van der Merwe <garyvdm@gmail.com>
|
|
Before this patch, makepkg does not check if $dir is a local clone of
the right repo.
For example, git fetch would be run even if $dir is not a local
bare clone of a git repo in present in source(), but a subdir of
a checked-out one. That means makepkg can potentially fetch from
a completely unrelated remote and update completely unrelated
dirs/files.
This patch adds a check to make sure we are fetching from the right
remote.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
|
|
Before this patch, makepkg would only check if $dir exists as an
indication that a local clone exists. And if $dir does exist, makepkg
will run git fetch inside it unconditionally.
After applying this patch, makepkg will check if the existent $dir is
empty. And if it is, it will be used to store a local clone.
Signed-off-by: Mohammad Alsaleh <msal@i2pmail.org>
|
|
When the len and cidx were changed to size_t in a8a1b093, it was
possible to have an integer overflow when a line ended right at the
edge of the terminal width.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Three warnings after someone deliberately typed --noextract is a
tad excessive... Also, an empty $srcdir is perfectly valid when
the source array is empty, although using --noextact then is
wasteful.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Rather than calling upon ls for this, use a proper shell function which
uses globbing to determine the existance of files in a directory.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
GPG signatures have a timestamp which is checked and if it's in the
future, verification will fail.
Dan: slight wording change.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
|
|
Somewhere in the arg parse refactoring, the args array went away and we
simply stashed our remaining parameters as positionals. Fix this up so
that pkgdelta doesn't mysteriously hang in read_pkginfo().
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Also consolidates cleanup for query_fileowner.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Returning "/" from mdirname removes it as a special case which allows us to
test it like any other directory. This corrects a false positive when querying
a file in / and root is not set to /.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Trailing '/' in paths causes lstat to dereference symlinks to
directories which causes it to break even though the symlink is a valid
target.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Resolving root early prevents later calls to realpath from having to do the
work of actually resolving any symlinks in root.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
resolve_path is a equivalent to calling realpath(path, NULL) except that the
returned string is guaranteed to be PATH_MAX long. We never append to the
returned string, so this is unnecessary.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Break out of pkgfile loop on match or continue if
the pkgfile path is too long.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Add details of the system wide and user specific versions of
makepkg.conf to the man page.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When using the --valgrind flag with the pactest.py script, the path
to the suppression file relies on the script being called from the
source root directory. Construct the path from the scripts location
to allow it to be called from directory.
Dan: style cleanup.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Currently, the package description is printed at the end of the -Si output.
This is probably one of the more important pieces of information so should
be nearer the top. Also move the package architecture up.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes the current syntax highlighting behavior in the 'options'
array, which does *not* flag illegal options (e.g. typos, unsupported
options). The shDoubleQuote and shSingleQuote options were the culprits.
Now, if you enter `'!imptydurs'`, the typoed option will be flagged red.
I also added syntax highlighting for the new options listed in `man 5
makepkg.conf`, which I believe were introduced around pacman 4.0.0.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Barbu Paul - Gheorghe <barbu.paul.gheorghe@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Barbu Paul - Gheorghe <barbu.paul.gheorghe@gmail.com>
|
|
Signed-off-by: Barbu Paul - Gheorghe <barbu.paul.gheorghe@gmail.com>
|
|
|
|
|
|
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Given the message is repeated for each repo, it is a good idea to
print the repo name in the output.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If a pkgver() function is specified, delay checking the package is
built until the pkgver is updated..
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Supported fragments are branch, revision and tag.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If a PKGBUILD has a pkgver() function, skip checking the pkgver validity
until it has been updated.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Do not update VCS sources if --holdver is used. If the VCS checkout
is not present, it will still be downloaded.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
VCS sources are not needed for --geninteg or --source operations.
This also prevents VCS downloads outputting to stdout, which
prevented piping -g output to the PKGBUILD.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
myver is a bit generic for an internal variable name.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Allow SVN repo sources in the form:
source=("<folder>::<repo>#<fragment>")
where <repo> must start with svn (e.g svn+http://) and a <fragment>
can specify a revision (e.g. revision=22).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Now that VCS repos are provided in the source array, it becomes too
complicated to have automatic updating pkgver as was the case with
the old VCS PKGBUILDs (there can be multiple repos of different types
in the source array, the VCS repo may not be the package primary
source, etc).
Instead provide an optional way for a PKGBUILD to update the pkgver
value through the specifing of a pkgver() function that returns the
new version string. This is run after all source files are downloaded
so can access the VCS repo if needed.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With VCS sources, get_filepath should return the directory of the
checkout. This allows backing up of the VCS checkout when using
--allsource. Fixes FS#21098.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Modify get_filename to return the name of the folder with VCS sources.
This fixes output issues in checksum checking.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
VCS sources should have "SKIP" for their checksum value
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Allow specifing GIT sources using the following syntax
source=('<folder>::<repo>#<fragment>')
This will download the git repo <repo> into <folder> (into $SRCDIR
if set, otherwise $startdir). <repo> must start with "git", but
non-git protocols are handled using (e.g.) "git+http://...".
The <fragment> can be used to specify a branch, tag, or commit to
build from. e.g. branch=maint.
Checksum entries for git sources should be "SKIP".
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If "SKIP" is provided for an integrity check, abort checking as soon
as possible.
Also swap fork to tr for bash4 conversion.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
In order to treat all VCS sources as URLs, we need to be able to
deal with more protocols. Rewrite download_sources to use a case
statement so additional protocols are easily added.
Also fix the use of scp to not pass the protocol in the URL
(noticed by William J. Bowman <wjb@williamjbowman.com>)
Signed-off-by: Allan McRae <allan@archlinux.org>
|