Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-10zsh completion: make sure all indentions are tabsDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: use consistent case statement styleDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: fix stacked completionDaniel Wallace
Before this, if you do pacman -Sy<tab> it completes to -y. Now, with -S and the other operations in the actual option _arguments, it won't remove the operations. Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: add deptest and databaseDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10testdb: quote output substitutionsAndrew Gregory
Quoting output substitutions makes whitespace errors such as FS#30101 much more obvious: old: missing perl-test-pod dependency for perl-test-output new: missing 'perl-test-pod ' dependency for 'perl-test-output' Several of the quoted substitutions should not be capable of containing whitespace in theory, but this errs on the side of caution as the point of the tool is to find error conditions. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10testdb: pass empty local pkglist to alpm_checkdepsAndrew Gregory
Passing the local package list to alpm_checkdeps as both the local packages and packages to be upgraded did nothing but cause extra overhead as the packages were all removed from the installed package list because they were being upgraded. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10pmpkg: add missing directories to test packagesAndrew Gregory
Several tests require complete file lists in order to provide accurate results. These can be non-obvious. Adding missing parent directories helps insure the integrity of tests against human error. Filling in parent directories also allows us to check that file lists are actually valid. There didn't seem to be a good place to do this that was always guaranteed to be run, so this adds a finalize() function to packages that will always be run before the package is actually used to allow for this type of tidying. Fixes FS#30723 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10makepkg: Add --verifysource to only download/verify source filesOlivier Brunel
Because --noextract also implies to not download/verify source files, it wasn't possible to simply do that, without either extracting and/or building. (Note: --verifysource takes precedence over --noextract) Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10makepkg: Make VCS download functions use get_filenameNeer Sighted
Make all VCS download functions uses get_filename to get the repo name. In addition, creating a working directory from a Bazaar repository now shows the short-name of the repository, not the full path on disk. I'm not sure if the name of the variable that holds the basename of the local clone should still be `repo`, but I have left the variable name for simplicity. Signed-off-by: Neer Sighted <neersighted@myopera.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10makepkg: Separate vcs download and extractWilliam Giokas
Previously makepkg would clone vcs sources in the download function, regardless of the noextract settings. Now the download_* functions only download or update the vcs sources, and the new extract_* functions just create working copies using the specified protocols. The extract_sources function will call the needed extract function for the protocol specified. The tarball extraction has also been moved into its own extract_file function to keep things consistent. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10make paclog-pkglist understand 'downgraded'Simon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10make status/log messages reflect version changeSimon Gomizelj
Currently pacman either prints 'adding' or 'upgrading' when installing a package. This make pacman print and log the other possible actions: 'downgrade' and 'reinstall' Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10bash_completion: update for colorAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10remove the duplicate strnlen and strndupSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10libalpm/sync: remove useless intermediate variableDave Reisner
This also rearranges some code to ensure that declarations and code aren't mixed. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08contrib: Add color to paccacheWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08contrib: Add color to bacmanWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08contrib: Make pacdiff colors the same as makepkgWilliam Giokas
Added an `ask` message function that emulates pacman's appearance. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to repo-addWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pkgdeltaWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pacman-optimizeWilliam Giokas
Color enabled by default, use --nocolor to disable colored output. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pacman-keyWilliam Giokas
Use --nocolor to suppress colored output from pacman-key, otherwise output will be in color. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pacman-db-upgradeWilliam Giokas
Color enabled by default, use --nocolor to turn off colors. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to library/output_format.shWilliam Giokas
Use the same colors as makepkg in messages. Add in the 'plain' function as well. To use the colors, you need to include the term_colors.sh file, or add definitions for the colors explicitly. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07update documentation and config filesSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize -QSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize -Sl/-QlSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize -Ss/-QsSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize the output of -Qi/SiSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize table outputSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize warnings and errorsSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07colourize colon_printf and questionSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07introduce colstr for colourizingSimon Gomizelj
colstr_t colstr will hold the colourizing agents. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07add a config settings and flag for coloursSimon Gomizelj
Colours can be enabled in two ways: - Add Color to pacman.conf. This enables colours automatically. - Use --color=WHEN where WHEN is none/auto/always. WHEN as 'never' disables colours (overrides config file), as 'auto' enables colours when stdout is a tty, and 'always' enables colours no matter what. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07standardize format functionsSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07remove format from statistic messagesSimon Gomizelj
Remove the format component of the "Total Download Size" and related messages. The heading will be colourized, the size won't. However since the length of these messages can vary by language, we need a pretty printer to format them nicely. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07split "Packages (%zd):" messageSimon Gomizelj
Basically all translation messages that need colouring but _also_ happen to be format strings need to be split up. This makes it easy to conditionally embed colour codes into the output at runtime. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07remove :: prefix from all messageSimon Gomizelj
This will substantially simplify the logic to add colours to messages. Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07refactor common code in query_search/sync_searchSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07makepkg: Use a recursive git clone.Neer Sighted
Make makepkg use a recursive clone when creating the working directory. This will initialize submodules Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07makepkg: Avoid find to fork for each rm callSébastien Luttringer
Reported-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Sébastien Luttringer <seblu@seblu.net> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07Add staticlibs option in PKGBUILDSébastien Luttringer
This option helps to removes static library files in packages. Related to the thread: https://mailman.archlinux.org/pipermail/arch-dev-public/2013-March/024552.html Signed-off-by: Sébastien Luttringer <seblu@seblu.net> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07libalpm: Search for replacers before literalsOlivier Brunel
Since 882bff36 literals would be searched before replacers, resulting in a package being replaced by another not actually being replaced under certain conditions (e.g. they're both in the same repo). This change effectively reversed the expectations in test sync132. This patch switches the order back to replacers first, thus making sure if a package is replacing another one, the change will always happen, even if both are in the same repo. Note that a package replacing another one in a repo with higher priority will not be done, see FS#11737 and test sync1105 Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07libalpm: Fix installing update of a replaced packageOlivier Brunel
During a sysupgrade, if a package is replaced by another, and an update for the former package is found (on another repo) the replaced package would be re-installed. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07fix typos in pacman testsAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07Do not resolve every local package filelist on removeAllan McRae
Although technically correct, this results in my system taking ~30 seconds to resolve all filelists when removing a package that has a directory not owned by any package. The check for if any package own the empty directory is a rare enough occurance, and it will be even rarer when that directory has a directory symlink in its path, so just revert this at this stage. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24add SYMEXPORT to alpm_filelist_containsAndrew Gregory
alpm_filelist_contains is listed in alpm.h and should be public but was not exported. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24dload: don't download sig if package is found in cacheDave Reisner
Avoids the segfault seen in FS#33911. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24Provide full path names in warning messagesRichard Pougnet
Fix FS#31556 by printing filename instead of entryname. Thus, removing a lot of confusion from the output. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-02-24paccache: use xargs to execute mv/rm commandsDave Reisner
This removes the restriction on the length of the command line, as xargs will work around by running multiple instances of the command for us. As seen: https://bbs.archlinux.org/viewtopic.php?pid=1232959 Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>