| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If the server redirects from ${repo}.db to ${repo}.db.tar.gz pacman gets
this wrong: It saves to new filename and fails when accessing
${repo}.db.
We need the remote filename only when downloading remote files with
pacman's -U operation. This introduces a new field 'trust_remote_name'
to payload. If set pacman downloads to the filename given by the server.
The field trust_remote_name is set in alpm_fetch_pkgurl().
Fixes FS#36791 ([pacman] downloads to wrong filename with redirect).
[dave: remove redundant assignment leading to memory leak]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This fixes error messages to display the contents of variables rather
than the variable name by replacing backticks with single quotes (m4
eats backticks). It also removes $"" localization from error messages to
eliminate security holes.
For instance, `rankmirrors nonexistent_file' will now display:
'nonexistent_file' does not exist.
rather than:
$1 does not exist.
Signed-off-by: Aaron Lindsay <aaron@aclindsay.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These loops already maintain an independent loop counter, so cut out
the middle man. While this change doesn't necessarily require that we
drop support for sparse arrays, we do via this patch. A new lint check
is added in check_sanity to abort when a sparse array is encountered.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These are all cases where we're reading filenames -- any backslashes
are intentional and should not be interpreted.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
With some simple math and printf formatting tokens, we can create the
whitespace necessary for this without the need for a loop and string
concatentation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add a "Usage" key to the repo section of the config which allows for the
tokens "Search", "Install", "Upgrade", "All", which correspond to values
in the alpm_db_usage_t enum. Users can specify "Usage" multiple times
for a given repo, or multiple flags per "Usage" line and they will be
OR'd together. If unspecified, the default is full usage of the repo.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This defines a level of interest a user has in a repository. These are
described by the bitmask flags in the alpm_db_usage_t enum:
ALPM_DB_USAGE_SEARCH: repo is valid for searching
ALPM_DB_USAGE_INSTALL: repo is valid for installs (e.g. -S pkg)
ALPM_DB_USAGE_UPGRADE: repo is valid for sysupgrades
ALPM_DB_USAGE_ALL: all of the above are valid
Explicitly listing the contents of a repo will always be valid, and the
repo will always be refreshed appropriately on sync operations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
An 'if' clause with empty statement is allowed, but unusual construct.
When 'if' is used this way the statement should at least have orphan
semicolon ';'. For empty statements 'switch' feels like a native way
express what is meant.
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
[Allan] Keep comment
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Unify the formatting of the --help switch for pacman utils, if it exists.
All of the pacman utils will now output help text using the following
format:
util-name (pacman) v<pacman version>
one line description of util's purpose
Usage: util-name [options]
-b, --bar whatever --bar does
-f, --foo whatever --foo does
-h, --help display this help message
The --help switch does not exist for a couple of the utils, so the
help/usage text for those will be displayed when the util is run
with no arguments.
Reported-by: Karol Błażewicz <karol.blazewicz at gmail.com>
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Implements FS#36776.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Unifying this list makes adding new algorithms easier. There's also
some menial cleanup in this patch to avoid use of eval and properly
treat lists of data as array instead of simple strings.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The symbol 'err' refers to err() from err.h, and is wisest to be avoided
as a variable name.
Reference: http://man7.org/linux/man-pages/man3/err.3.html
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Sami Kerola <kerolasa@iki.fi>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Looks like I fat fingered something when I refactored the original
submissions. Woops.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Fixes FS#36618.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Bug exposed on ARM when char is unsigned resulting in the comparison
to EOF always failing.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
* append "/" to directories before searching package file lists
* use lstat over stat so symlinks aren't resolved
* fix the inverted check for stat's return value
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This allows for VAR=value and VAR+=value variable declarations.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
These references to bug numbers assume we will forever be using that bug
tracker. It is better to properly comment the code instead (which was
done in almost all cases anyway).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The recursion limit is an artificial limitation imposed to prevent
memory exhaustion in a recursive function. Giving it file-level scope
increases its visibility.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If an error in the main file would be fatal there is little reason to
ignore the error in an included file.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
By the time we make the recursive call we have already finished with the
line buffer, making it safe to reuse.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Move _parseconfig to ini.c as _parse_ini and create a convenient wrapper
for the public API.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This will allow passing arbitrary key/value handlers.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
_parseconfig now tracks the current section name directly so that the
name stored in the section struct is just a pointer to the one stored by
_parseconfig.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Include directives no longer have to be within a section.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This consolidates all of our state information into a single variable.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This functionality can be provided by a test harness. Having pactest
output this information as well clutters the result log created by
automake.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This removes the --test switch, making it easier to call pactest from
a test harness.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Our test scripts currently require that the first argument be the
library or binary to be tested. This makes integrating them with
automake which doesn't have a mechanism for passing specific arguments
to individual tests. Instead, provide a default built from paths in the
environment which can be provided to all test scripts by automake.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Each test produces a single TAP result with the rules run in a sub-test.
This reduces output when run under automake and makes it possible to
continue setting expectfailure at the test level rather than per-rule.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Tests should only be skipped when they aren't relevant, not when the
test itself is bad.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use the architecture of the python interpreter running the test to
detect 32bit systems.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When pacman failed to initialise the alpm library due to the database
directory being missing (either via the root not existing or the database
directory itself not existing), it just printed the non-informative
message "could not find or read directory". Add the directory
information the the error output. E.g.:
error: failed to initialize alpm library
(could not find or read directory: /this/does/not/exist/var/lib/pacman/)
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Using setlocale in the backend is bound to lead to frontend issues
and we have have been using epoch in our databases since April 2007
(commit 47622eef). Remove support for old style times.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We currently only warn if a directory's permissions differ, but using -Qkk
on my system shows that directory permissions tend to change in packages
reasonably frequently without notice. Provide a warning in such cases
so that it can be altered. Example output:
(1/1) reinstalling nginx
warning: directory ownership differs on /var/lib/nginx/proxy/
filesystem: 33:0 package: 0:0
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Backup files are expected to be changed and should not be flagged by -Qkk.
Note changed back-up files in -Qkk but do not count them as altered. Do
not report backup files in -Qqkk.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Replace spaces with tabs in one instance.
Remove extra spaces.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Replace spaces with tabs.
Remove extra spaces.
Signed-off-by: Jason St. John <jstjohn@purdue.edu>
Signed-off-by: Allan McRae <allan@archlinux.org>
|