| Age | Commit message (Collapse) | Author |
|---|
|
makepkg only considers global {make,}depends when checking require packages
are installed before building.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This spacing appears to have been added to align sizes. It sometimes worked...
$ pacman -Si glibc | grep Size
Download Size : 8.03 MiB
Installed Size : 35.08 MiB
And it sometimes failed...
$ pacman -Si pacman | grep Size
Download Size : 662.82 KiB
Installed Size : 4045.00 KiB
Remove the spaces for a consistent output.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Bug introduced with commit 8454daa7.
Reported-by: Zuyi Hu <hzy068808@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Johannes Löthberg <johannes@kyriasis.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Silence warnings from clang about typecasting alignment.
Reported-by: Rikard Falkeborn
Original-patch-by: Olivier Brunel
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
alpm_list_add always returns the provided list making it impossible for
callers to check whether or not the operation actually succeeded without
manually comparing the list length before and after. alpm_list_append
instead returns a pointer to the newly created list item so that success
can be checked.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The test introduced herein illustrates a behavior that may be unexpected
to package writers.
It creates a package "pkg3" that is configured to depend on a
"dependency" which version is between 3 and 4, inclusive. Two other
packages are already present, providing "dependency" in version 2 and 5,
respectively. So, the situation looks roughly like this:
pkg1 pkg3 pkg2
provides depends on provides
| <------------> |
version __________2____________3____________4____________5___________...
This seems to be enough to satisfy pacman when installing "pkg3". From
an iterative standpoint, this is completely logical: First, the
requirement "dependency>=3" is checked. There is a package that
satisfies this restriction, it is called "pkg2". Afterwards,
"dependency<=4" is covered in the same way by "pkg1".
Nonetheless, what a package writer intends when specifying
depends=('dependency>=3' 'dependency<=4')
is most probably that pacman should only allow this package to be
installed when there indeed is a package present that provides a version
of "dependency" that lies _between_ 3 and 5.
Signed-off-by: Dominik Fischer <d dot f dot fischer at web dot de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The signedness of char is implementation defined. On systems where
char is unsigned, comparing a variable of type char with -1 is never
true, due to integer promotion rules. To avoid this, introduce a
define for invalid field separators where -1 is cast to char. This will
ensure that the return value check works for both unsigned and signed char.
Fixes one warning [-Wtype-limits] for comparissons with -1 when compiling
with -funsigned-char.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The signedness of char is implementation defined. Since the
alpm_graph state is clearly meant to be signed, make the
signedness explicit.
This fixes bugs on systems where char is unsigned, in comparissons
of the following type:
if(v.state == -1)
which, if state is unsigned, will never be true due to integer
promotion rules.
Fixes failing test/pacman/tests/sync012.py when compiling with -funsigned-char.
Fixes two warnings [-Wtype-limits] for comparissons with -1 when compiling
with -funsigned-char.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
make update-copyright OLD=2015 NEW=2016
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This should also be added for "-Fh", but that is missing completely in
zsh_completion.
1: https://lists.archlinux.org/pipermail/pacman-dev/2015-November/020538.html
Signed-off-by: Daniel Hahler <git@thequod.de>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
bacman and updpkgsums used GNU mktemp's --tmpdir option, which is not
supported by some other implementations (including busybox). Replace that with
shell code.
Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The CheckSpace option checks the size of all files in a package being replaced
and gives a warning when it can not read the file. However, files in NoExtract
are expected to be missing and should not be warned about.
Fixes FS#47470.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Most entries in $sources contain variables so finding out why a URL
fails to download is hard because one has to manually replace the
variables when looking at the PKGBUILD. Simply output the full URL here
so that it can be easily seen what is wrong.
Old:
==> ERROR: Failure while downloading example-1.2.4.tar.gz
New:
==> ERROR: Failure while downloading http://example.org/releases/1.1/example-1.2.4.tar.gz
With the new format it is much more obvious that the directory name is
the culprint (1.1 vs 1.2) while the old one would not display that
information.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
There is no need to run any/remaining pre-transaction hooks as soon as a failure
has occured, which will lead to aborting the transaction.
So if an error occured during the first phase (reading directories/parsing
files), or as soon as a hook flagged abort_on_fail does fail, we stop processing
them and return.
(For post-transaction hooks, all hooks are run regardless since there's no
aborting.)
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Modifications made to the source before running with --noextract may alter
the version string returned by pkgver(). Always run this function if present
and check build status before proceeding. Fixes FS#46800.
Also run prepare() when --noextract is used (unless --noprepare is specified).
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Point people towards the help when using "pacman -F" or "pacman -F foo".
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The "Description" field allows a hook to provide a some text for frontends
to use in describing what the hook is doing. For example:
Description = updating info page directory
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Introduces the ALPM_EVENT_HOOK_RUN_{START,DONE} events that are triggered
at the start and end of running an individual hook.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This provides a way to detect when the processing of package changes starts,
allowing pacman to delineate hook output and package installation/removal
output.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Add events to let frontends know when hooks are being processed (and when it's
done), as that might be useful to update the UI.
Signed-off-by: Olivier Brunel <jjk@jjacky.com>
|
|
Having a first pass that checks which hooks are triggered followed by a
second pass of the triggered hooks allows us to only provide output when
a hook is actually triggered.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Removes a leftover error message from when fdopen and fgets were used to
read from the pipe.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This information can be used to reproduce build conditions, which can then be
used to determine if a package builds reproducibly.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The path of the default system hook directory was created
by concatenating `myhandle->root` (usually "/"), and
SYSHOOKDIR (usually "/usr/share/libalpm/hooks/"), resulting
in "//usr/share/libalpm/hooks/". Fix this by skipping the
initial slash from SYSHOOKDIR.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signature downloading and DB validation was being based on the most
recent download status for the DB. If a DB successfully downloaded but
a signature did not, db_update would move to the next server. If the
next server tried does not have a more recent copy of the DB, db_update
would not download the DB again and would forget that the DB had
previously been updated. In this case it would skip validation
entirely, leaving an updated DB with the original validation status.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
At some point back in 2009, logging was expanded to cover all of the packaging
functions, but the man page was not updated to reflect that. Fix that!
Signed-off-by: Alastair Hughes <hobbitalastair@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The soft interrupt handler dereferences config, causing a segfault if
it is called during cleanup.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Delays handler setup until after config is set to a valid
value to avoid a segmentation fault.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signals are special because they run asynchronously, making them
non-trivial to handle correctly. Move the handlers a separate file to
offset them from the normal code and make them easier to separate into
individual functions without further cluttering pacman.c
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
signal(7) lists a set of functions that can safely be called from within
a signal handler. Even fileno and strlen are not guaranteed to be safe.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Our signal handler provides a way to gracefully interrupt a transaction
and should always be set.
The check appears to have originally been copied directly from the glibc
manual.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
On SIGTERM pacman was exiting immediately, even in the middle of
a transaction. In this case we should leave the lock file in place as
an indication that the database may not be in a consistent state.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Memory allocation/deallocation functions are not safe to call from
signal handlers. Just remove the lock file if there is one and exit
immediately.
Fixes: FS#46375, FS#45995, FS#47011
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
alpm_unlock is a limited version of alpm_release that does nothing but
the actual unlinking of the lock file and is therefore safe to call from
signal handlers.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Returning -1 is useless since we don't provide any way
to determine why it failed.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When replacing a file with a directory, any files inside the new
directory cannot possibly exist on the filesystem and can be skipped.
This allows cross-package symlink-to-directory transitions when there
are files with the same name under both the symlinked directory and the
new directory.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
libarchive will not extract a directory over an existing directory
symlink, making it impossible to replace a symlink with a directory
across packages. Adding the ARCHIVE_EXTRACT_UNLINK and
ARCHIVE_EXTRACT_SECURE_SYMLINKS causes libarchive to unlink the existing
symlink and prevents it from extracting any paths that contain
a symlink, which we should not be doing anyway.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
When a symlink to a directory is changing to a directory, any package file
inside the new directory can create an unexpected conflict with the filesystem.
Reported by Neofytos and Luca from Chakra.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Large file support is enabled by our configure script as required. If anything
linking to libalpm does not also define large file support, there will be
differences in the size of off_t which are not caught until runtime.
Add the required CFLAGS to the pkg-config file so that users of libalpm know
what flags are required.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If the script output does not end in a newline there could still be data
in the buffer after the poll loop.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|