| Age | Commit message (Collapse) | Author |
|---|
|
This adds a logger to the CURLE_OK case so we can always know the return
code if it was >= 400, and debug log it regardless. Also adjust another
logger to use the cURL error message directly, as well as use fstat()
when we have an open file handle rather than stat().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
pkgrel, as with pkgver, simply mustn't contain hyphens.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
These can either be replaced with pm_printf() if they are error related,
or in the fprintf(stdout, ...) case a bare printf() will do.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that pm_printf() always prints to stderr, we don't need this second
function that was always used with stderr as the first argument. Thus,
this patch removes the function and makes the following sed replacement:
sed -i -e 's#pm_fprintf(stderr, #pm_printf(#g' src/pacman/*.c
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This matches what we now do in our backend callback function- all
debug/info/warning/error/etc. messages should be on stderr. These are
all the messages with a "warning:" or other type prefix, so does not
affect general pacman output.
This should fix the output confusion noted in FS#26555.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The default is supposidely 30 seconds from the gpg manpage, but that
sure wasn't what I was seeing- it was somewhere closer to two minutes of
silence. Add a more reasonable 10 second timeout value which should be
good enough for any keyserver that doesn't totally stink at it's job.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The absolutely terrible part about this is the failure on GPGME's part
to distinguish between "key not found" and "keyserver timeout". Instead,
it returns the same silly GPG_ERR_EOF in both cases (why isn't
GPG_ERR_TIMEOUT being used?), leaving us helpless to tell them apart.
Spit out a generic enough error message that covers both cases;
unfortunately we can't provide much guidance to the user because we
aren't sure what actually happened.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Use the normal error functions here rather than a bare fprintf().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Nothing we do in our traps is necessary this early in the script. This
fixes FS#26196.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks to Eduardo Tongson on the mailing list.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is in the realm of "probably not going to happen", but if someone
were to translate "disk" to a string longer than 256 characters, we
would have a smashed/corrupted stack due to our unchecked strcpy() call.
Rework the function to always length-check the value we copy into the
hostname buffer, and do it with memcpy rather than the more cumbersome
and unnecessary snprintf.
Finally, move the magic 256 value into a constant and pass it into the
function which is going to get inlined anyway.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes it a three-column deal with releases all the way back to 1.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Make all docs depend on Makefile; if we change flags here we want them
rebuilt.
* Add explicit filenames to .gitignore so we can add our own CSS
override file, and add an asciidoc-override.css resource.
* Adjust a few asciidoc options when generating HTML.
* Remove asciidoc-manpage.css; apparantly this doesn't exist anymore.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This includes some fixes to the messages that are displayed when a
signal is caught in makepkg or repo-add:
* Instead of always showing "==> ERROR: TERM signal caught. Exiting...",
replace "TERM" by whatever signal is actually caught.
* Fix a typo in the SIGERR error message in repo-add ("occurred" instead
of "occured"). Francois already fixed this for makepkg in 1e51b81c.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is a small chance that a user sends SIGINT (or any other signal
that is trapped) when we're already in clean_up() which used to lead to
trap_exit() being executed and the remaining code in clean_up() being
skipped due to the bash signal/trap handler blocking EXIT (since its
handler is already being executed, even if it's interrupted).
In practice, this behaviour caused unexpected results (primarily because
pressing ^C at the wrong time left a lock file behind):
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> Extracting database to a temporary location...
==> ERROR: File 'foobar' not found.
==> No packages modified, nothing to do.
^C
==> ERROR: Aborted by user! Exiting...
$ ./repo-add extra.db.tar.gz foobar
==> ERROR: Failed to acquire lockfile: extra.db.tar.gz.lck.
==> ERROR: Held by process 18522
Fix this and reduce the chance of race conditions in signal handlers by:
* Unhooking all traps in both clean_up() and trap_exit().
* Call clean_up() explicitly in trap_exit() to make sure we remove the
lock file and the temporary directory even if we send SIGINT when
clean_up() is already being executed but didn't reach the unhook code
yet.
Also, add an optional parameter to clean_up() to allow for setting an
explicit exit code when we call clean_up() from trap_exit().
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should help point users in the right direction if they have not
initialized via pacman-key just yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In the default configuration, we can enter the signing code but still
have nothing to do with GPGME- for example, if database signatures are
optional but none are present. Delay initialization of GPGME until we
know there is a signature file present or we were passed base64-encoded
data.
This also makes debugging with valgrind a lot easier as you don't have
to deal with all the GPGME error noise because their code leaks like a
sieve.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This had the unfortunate implementation detail that depended on the
strings having 1 byte == 1 column hold true. As we know, this is not at
all the case once you move past the base ASCII character set.
Reimplement this whole thing so it doesn't depend on format strings at
all. Instead, simply calculate the max column widths, and then when
displaying each row add the correct amount of padding using UTF-8 safe
string length functions.
Before:
名字 旧版本新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
After:
名字 旧版本 新版本 净变化 下载大小
libgee 0.6.2.1-1 0.60 MiB 0.10 MiB
libsocialweb 0.25.19-2 1.92 MiB 0.23 MiB
folks 0.6.3.2-1 1.38 MiB 0.25 MiB
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We have a few incomplete translations, but these should be addressable
before the 4.0.1 maint release that is surely not that far in the
future.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This screws up gettext and causes the message to display always
untranslated.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
In prep for the 4.0.0 release.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Similar to what we did in edd9ed6a, disconnect the relationship with our
stack allocated error buffer from the curl handle. Just as an FTP
connection might have some network chatter on teardown causing the
progress callback to be triggered, we might also hit an error condition
that causes curl to write to our (now out of scope) error buffer.
I'm unable to reproduce FS#26327, but I have a suspicion that this
should fix it.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Our error message used to be very unclear when the configuration file
could not be found:
$ ./pactree -lsr gtk
error: failed to register sync DBs
Instead, display an accurate message and include the file name:
$ ./pactree -lsr gtk
error: config file /usr/local/etc/pacman.conf could not be read
Also, move the error message inside register_syncs() to allow for
differentiating between different errors that might require a handler in
the future.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows for specifying an alternate configuration file path, similar
to pacman's "--config" option.
Given that there is currently no other way to tell pactree to read from
another configuration file (except for patching or symlinking), this
seems totally sensible - even if there are plans to refactor and/or
replace the standalone configuration file parser.
We do not define a short option for the sake of consistency with
pacman's set of command line options.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Inline comments after pkgver or pkgrel would cause the sanity
checks to fail so remove them before checking the value.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Make the output into a single block and add separators at the end
so that they do not merge into each other.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The original code- pkg_dir="$(echo $pac_db/$pkg_name-[0-9]*)" is
problematic in several ways:
- $pac_db and $pkg_name should be quoted, obviously.
- It assumes pkgver always starts with an integer, while in fact
it just can't contain ':' and '-'.
Counterexample: the code breaks on lshw B.02.15-1.
- It assumes there are no more than one directory matching the
pattern. While this should be the case if everything works
perfectly, it certainly relies on external conditions.
Counterexample: if the local db contains two packages named
foo and foo-3g, even if everything else is perfect, the code
will match two directories.
Don't make assumptions, use what is known.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
|
|
bacman should support whatever makepkg does as PKGEXT.
Also remove obsolete $EXT variable.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
|
|
This includes:
- Quoting fixes.
- Drop deprecated mktemp option -p.
- Set extglob nullglob shell options at the top.
- Use extended globbing instead of regex to match %HEADER% in pacman db.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
|
|
Another style change. The [[ expression ]] form is particularly
cleaner, safer and more powerful than the [ expression ] form.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
|
|
As every piece of code in the whole project uses TAB as indentation
character, bacman shouldn't be an exception.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
|
|
This will have to be picked up downstream of course, but addresses
FS#25684 now that this is a lot faster in 4.0 than it was in the
original 3.5 implementation.
Also make curl the first XferCommand listed, as we are moving away from
any other download program at this point.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes the maintainer's life (read: my life) a lot easier when
updating translation files to push to Transifex.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows it to serve double-duty. In order to allow users to base
verification decisions off of both a valid signature and a trusted
signature, we need to assign some level of owner trust to the keys we
designate as trusted on import.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* --import now only imports keys from pubkey.gpg and does not import
owner trust; if you want to have both simply run the operations in
sequence.
* --import-trustdb has been simplified; it will overwrite existing
values in the trust database as before, but there is no need to export
it first as those values are safe if left untouched.
* Fix the manpage referring to a non-existent option.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was a bad oversight on my part, pointed out by Jakob. Whoops.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If PKGEXT is not one of the recognized tar*'s, create_package() would
create an empty package file and fail, since bsdtar on the left side of
the pipe returns 141 on SIGPIPE (broken pipe).
This patch changes the behavior for an invalid PKGEXT. A warning is
printed on stderr, and a tar file is created. Also retire the obsolete
$EXT variable.
Add the obligatory comment why we don't use bsdtar's compression.
Finally, fix mixed-tab-space indentation.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Another place where we were doing the dirty work by hand.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
SRCEXT should allow whatever PKGEXT does.
Also address an uninitialized use of $ret.
Signed-off-by: lolilolicon <lolilolicon@gmail.com>
|