Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-09-18bacman: optionally include unmodified backup files when availableXyne
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18bacman: update copyright information in version functionXyne
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18bacman: pass unshifted arguments to fakerootXyne
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18dload: avoid renaming files downloaded via sync operationsChristian Hesse
If the server redirects from ${repo}.db to ${repo}.db.tar.gz pacman gets this wrong: It saves to new filename and fails when accessing ${repo}.db. We need the remote filename only when downloading remote files with pacman's -U operation. This introduces a new field 'trust_remote_name' to payload. If set pacman downloads to the filename given by the server. The field trust_remote_name is set in alpm_fetch_pkgurl(). Fixes FS#36791 ([pacman] downloads to wrong filename with redirect). [dave: remove redundant assignment leading to memory leak] Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18contrib: Unify quoting in error messagesAaron Lindsay
This fixes error messages to display the contents of variables rather than the variable name by replacing backticks with single quotes (m4 eats backticks). It also removes $"" localization from error messages to eliminate security holes. For instance, `rankmirrors nonexistent_file' will now display: 'nonexistent_file' does not exist. rather than: $1 does not exist. Signed-off-by: Aaron Lindsay <aaron@aclindsay.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18makepkg: use c-style for loops for integrity checksDave Reisner
These loops already maintain an independent loop counter, so cut out the middle man. While this change doesn't necessarily require that we drop support for sparse arrays, we do via this patch. A new lint check is added in check_sanity to abort when a sparse array is encountered. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18makepkg: always use read's -r flag with filenamesDave Reisner
These are all cases where we're reading filenames -- any backslashes are intentional and should not be interpreted. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18makepkg: inline creation of checksum indentingDave Reisner
With some simple math and printf formatting tokens, we can create the whitespace necessary for this without the need for a loop and string concatentation. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-18makepkg: cleanup a few format string injectionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04pactree: set full usage on DBs when registeringDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04pacman: add front end support for repo usage levelDave Reisner
Add a "Usage" key to the repo section of the config which allows for the tokens "Search", "Install", "Upgrade", "All", which correspond to values in the alpm_db_usage_t enum. Users can specify "Usage" multiple times for a given repo, or multiple flags per "Usage" line and they will be OR'd together. If unspecified, the default is full usage of the repo. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04libalpm: introduce a usage level for reposDave Reisner
This defines a level of interest a user has in a repository. These are described by the bitmask flags in the alpm_db_usage_t enum: ALPM_DB_USAGE_SEARCH: repo is valid for searching ALPM_DB_USAGE_INSTALL: repo is valid for installs (e.g. -S pkg) ALPM_DB_USAGE_UPGRADE: repo is valid for sysupgrades ALPM_DB_USAGE_ALL: all of the above are valid Explicitly listing the contents of a repo will always be valid, and the repo will always be refreshed appropriately on sync operations. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04proto: remove redundancy in cd for each functionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04pacman/util.c: use switch when there are fall through statementsSami Kerola
An 'if' clause with empty statement is allowed, but unusual construct. When 'if' is used this way the statement should at least have orphan semicolon ';'. For empty statements 'switch' feels like a native way express what is meant. Signed-off-by: Sami Kerola <kerolasa@iki.fi> [Allan] Keep comment Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04Improve --help switch output for pacman utilsJason St. John
Unify the formatting of the --help switch for pacman utils, if it exists. All of the pacman utils will now output help text using the following format: util-name (pacman) v<pacman version> one line description of util's purpose Usage: util-name [options] -b, --bar whatever --bar does -f, --foo whatever --foo does -h, --help display this help message The --help switch does not exist for a couple of the utils, so the help/usage text for those will be displayed when the util is run with no arguments. Reported-by: Karol Błażewicz <karol.blazewicz at gmail.com> Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04makepkg: add support for sha224 checksumsDave Reisner
Implements FS#36776. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04makepkg: unify list of known hash algorithmsDave Reisner
Unifying this list makes adding new algorithms easier. There's also some menial cleanup in this patch to avoid use of eval and properly treat lists of data as array instead of simple strings. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04libalpm: avoid name space conflictSami Kerola
The symbol 'err' refers to err() from err.h, and is wisest to be avoided as a variable name. Reference: http://man7.org/linux/man-pages/man3/err.3.html Signed-off-by: Sami Kerola <kerolasa@iki.fi> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04common: compare value rather than pointer addressSami Kerola
Signed-off-by: Sami Kerola <kerolasa@iki.fi> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04makepkg.8: fix typo in usageDave Reisner
Looks like I fat fingered something when I refactored the original submissions. Woops. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-09-04alpm: log errors for scriptlets terminated by a signalDave Reisner
Fixes FS#36618. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21Store fgetc output as an int.Allan McRae
Bug exposed on ARM when char is unsigned resulting in the comparison to EOF always failing. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conflict.c: fix directory ownership checkAndrew Gregory
* append "/" to directories before searching package file lists * use lstat over stat so symlinks aren't resolved * fix the inverted check for stat's return value Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21doc/repo-add: Add note on when signatures are added to the dbOlivier Brunel
Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21makepkg: allow make-style environment var overridesDave Reisner
This allows for VAR=value and VAR+=value variable declarations. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21check.c: break backup file search loop after matchAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21Do not refer to FlySpray numbersAllan McRae
These references to bug numbers assume we will forever be using that bug tracker. It is better to properly comment the code instead (which was done in almost all cases anyway). Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21ini.c: give recursion limit file scopeAndrew Gregory
The recursion limit is an artificial limitation imposed to prevent memory exhaustion in a recursive function. Giving it file-level scope increases its visibility. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21ini.c: make errors in includes fatalAndrew Gregory
If an error in the main file would be fatal there is little reason to ignore the error in an included file. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21ini.c: reuse line bufferAndrew Gregory
By the time we make the recursive call we have already finished with the line buffer, making it safe to reuse. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: extract ini parsing code to separate filesAndrew Gregory
Move _parseconfig to ini.c as _parse_ini and create a convenient wrapper for the public API. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: pass _parse_directive as a callbackAndrew Gregory
This will allow passing arbitrary key/value handlers. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: move section handling out of _parseconfigAndrew Gregory
_parseconfig now tracks the current section name directly so that the name stored in the section struct is just a pointer to the one stored by _parseconfig. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: move directive parsing out of _parseconfigAndrew Gregory
Include directives no longer have to be within a section. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: move repo parsing out of _parseconfigAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21conf.c: add parse_options to section_tAndrew Gregory
This consolidates all of our state information into a single variable. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21pactest: remove results summaryAndrew Gregory
This functionality can be provided by a test harness. Having pactest output this information as well clutters the result log created by automake. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21integrate tests with automakeAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21pactest: accept test names without a switchAndrew Gregory
This removes the --test switch, making it easier to call pactest from a test harness. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21provide default values for test scriptsAndrew Gregory
Our test scripts currently require that the first argument be the library or binary to be tested. This makes integrating them with automake which doesn't have a mechanism for passing specific arguments to individual tests. Instead, provide a default built from paths in the environment which can be provided to all test scripts by automake. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21convert pactest to TAP outputAndrew Gregory
Each test produces a single TAP result with the rules run in a sub-test. This reduces output when run under automake and makes it possible to continue setting expectfailure at the test level rather than per-rule. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21pactest: treat unknown rules as failuresAndrew Gregory
Tests should only be skipped when they aren't relevant, not when the test itself is bad. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21convert test scripts to tap outputAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-08-21query006: only set expectfailure on 32-bit systemsAndrew Gregory
Use the architecture of the python interpreter running the test to detect 32bit systems. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Report missing directory if we can not initialise alpm libraryAllan McRae
When pacman failed to initialise the alpm library due to the database directory being missing (either via the root not existing or the database directory itself not existing), it just printed the non-informative message "could not find or read directory". Add the directory information the the error output. E.g.: error: failed to initialize alpm library (could not find or read directory: /this/does/not/exist/var/lib/pacman/) Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Remove setlocale usage from the backendAllan McRae
Using setlocale in the backend is bound to lead to frontend issues and we have have been using epoch in our databases since April 2007 (commit 47622eef). Remove support for old style times. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Warn when directory ownership differs between filesystem and packageAllan McRae
We currently only warn if a directory's permissions differ, but using -Qkk on my system shows that directory permissions tend to change in packages reasonably frequently without notice. Provide a warning in such cases so that it can be altered. Example output: (1/1) reinstalling nginx warning: directory ownership differs on /var/lib/nginx/proxy/ filesystem: 33:0 package: 0:0 Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Only note backup file changes with -QkkAllan McRae
Backup files are expected to be changed and should not be flagged by -Qkk. Note changed back-up files in -Qkk but do not count them as altered. Do not report backup files in -Qqkk. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Fix whitespace in makepkg.sh.in and makepkg-template.pl.inJason St. John
Replace spaces with tabs in one instance. Remove extra spaces. Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-07-30Fix whitespace in pacsort.c and pactree.cJason St. John
Replace spaces with tabs. Remove extra spaces. Signed-off-by: Jason St. John <jstjohn@purdue.edu> Signed-off-by: Allan McRae <allan@archlinux.org>