Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-12-12Add functions to calculate approximate disk usage by packagesAllan McRae
Two helper function are added to calculate the disk usage from packages that are either currently installed on the system or from a package archive. Some minor approximations have been made: 1. Size for directories is not considered when removing a package from the filesystem to avoid multiple counting across packages. Also, these are reported to take zero size while installing. 2. Symlinks are reported to contribute zero size towards removal as libarchive reports them to have zero size for install. 3. Package data files (.PKGINFO, .INSTALL, .CHANGELOG) are counted towards usage on dbpath on install, but their size is not counted on package removal. 4. No handling of extra size needed for .pacsave/.pacnew files. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add function to match file to mount pointAllan McRae
For a given file, determine which mount point it is on or will be installed to. Take into account that we might be using an alternative installation root. Add additional helper function added to sort mount point list for easier matching. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add function for listing system mount pointsAllan McRae
Add a mount_point_list() function that attempts to portably obtain a list of system mount points and a struct to hold needed mount point information. Abort the transaction if we are unable to determine the mount points. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Prototype disk space checking functionalityAllan McRae
Very basic prototyping for adding functionality to check free disk space before performing package installs. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Remove AC_TYPE_SIGNAL usageDan McGee
This macro is deemed unnecessary by even the autoconf guys, so we really don't need to use it. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12dirent usage cleanupDan McGee
We were including the header in a lot of places it is no longer used. Additionally, use the correct autoconf macro for determining whether d_type is available as a member: HAVE_STRUCT_DIRENT_D_TYPE. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Move MAX_DELTA_RATIO definitionAllan McRae
This is a delta specific definition so it makes more sense to put it in the delta specific header file. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Combine reading from depends and desc in sync dbAllan McRae
This will allow us to eventually combine the depends and desc entries within the sync database. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12makepkg: remove dead code from handle_depsAndres P
The error message that has been removed never gets to print because, given the same condition, handle_deps throws the same error and then immediately exits makepkg. Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12makepkg: do not ignore errors from pacman when checking depsAndres P
As check_deps is run in a subshell, exit had the same meaning as return. Since the intention is to halt makepkg when pacman throws an error other than 127, the enclosing function has to handle error control instead. Fixes FS#19840 Signed-off-by: Andres P <aepd87@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12makepkg: use portable escape sequence for terminal escapesCarlos Diaz
The escape string isn't necesarily \033; it's determined by what the particular termcap/info entry for that terminal contains. Bash uses ncurses functions to expand \e to the _correct_ terminal escape. Signed-off-by: Carlos Diaz <839273@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Add epoch to PKGBUILD prototypesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12src/util: update .gitignoreDan McGee
Add pactree and sort entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12contrib: remove bash pactreeXavier Chantry
This has been rewitten in C which is much much faster. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12pactree: use variables for color and tree outputXavier Chantry
This allows to very easily support non-color and linear mode, by just setting the variables to an empty string, very much like it was done in the bash script. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12pactree: separate dependency and print logicXavier Chantry
The deps walking code simply calls print_start, print, print_end, and all the printing logic is handled there. The unresolvable printing is disabled for now because it does not handle linear mode, and the linear and color output will be re-written. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12pactree: rewrite in CDave Reisner
Use the bash script in contrib as the basis for a C rewrite using libalpm. The speedup can go from dozens of seconds to less than one second. Colorized output is preserved. The --graph option generates output that graphviz's `dot' utility will understand to draw us a graph. Output is written to stdout and it is left up to the user to pipe the data and determine the output characteristics. Signed-off-by: Dave Reisner <d@falconindy.com> Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
2010-12-12alpm/remove.c : respect --dbonly during remove-upgradeXavier Chantry
When a -Sk or -Uk operation induced a removal of an existing local package, --dbonly was not in effect and the files were all removed. Fixing this behavior was already marked as TODO in database012 pactest ------------ TODO: I honestly think the above should NOT delete the original les, it hould upgrade the DB entry without touching anything on the file stem. E.g. this test should be the same as: pacman -R --dbonly dummy && pacman -U --dbonly dummy.pkg.tar.gz ------------ Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchup] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12pacman: sort --help outputXavier Chantry
Example with pacman -Uh : $ pacman -Uh options: -b, --dbpath <path> set an alternate database location -d, --nodeps skip dependency checks -f, --force force install, overwrite conflicting files -k, --dbonly only modify database entries, not package files -r, --root <path> set an alternate installation root -v, --verbose be verbose --arch <arch> set an alternate architecture --asdeps install packages as non-explicitly installed --asexplicit install packages as explicitly installed --cachedir <dir> set an alternate package cache location --config <path> set an alternate configuration file --debug display debug messages --ignore <pkg> ignore a package upgrade (can be used more than once) --ignoregroup <grp> ignore a group upgrade (can be used more than once) --logfile <path> set an alternate log file --noconfirm do not ask for any confirmation --noprogressbar do not show a progress bar when downloading files --noscriptlet do not execute the install scriptlet if one exists --print only print the targets instead of performing the operation --print-format <string> specify how the targets should be printed Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> [Dan: small coding style touchups] Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12CLI args: update --help and manpageXavier Chantry
The three parts (help, manpage and code) are now organized in the same way and much easier to compare : - specific options - install/upgrade options for -S and -U - transaction options for -S -R and -U - global options After this re-organization, it was easy to update and sync the three components together. Duplication is also avoided. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12alpm: don't expose alpm_depcmpXavier Chantry
Either we expose all low levels function dealing with pmdepend_t (splitdep and depfree come to mind), or we don't. Since none of the tools use depcmp, I chose to remove it. In the future, we might want to expose higher level functions such as alpm_find_satisfier, or just lower level functions like splitdep and depfree together with depcmp. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12alpm: kill alpm_deptestXavier Chantry
This has been replaced by the more flexible alpm_find_satisfier function, and alpm_deptest was completely unsused now. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12pacman/deptest: reimplement with alpm_find_satisfierXavier Chantry
It's very easy to re-implement the -T feature with the more generic alpm_find_satisfier rather then the more specific and less useful alpm_deptest. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12alpm: add new alpm_find_satisfier functionXavier Chantry
whatprovides and splitdep were removed, so depcmp alone is quite useless now without splitdep, and deptest is not flexible enough. Introduce a new alpm_find_satisfier which is hopefully more flexible, this should make implementation of deptest very easy, and also help alpm tools such as pactree. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Fix a few problems reported by clang-analyzerXavier Chantry
One missing NULL-check and 3 dead assignments. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Ensure stdin args are correctly terminatedDan McGee
And don't require pm_targets to be empty to read from stdin either. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-12Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/be_local.c lib/libalpm/trans.c
2010-12-12be_files: write EPOCH instead of FORCEXavier Chantry
This patch is only meant for 3.4.x. It prepares the place for the future epoch-aware release. All force packages that get reinstalled or upgraded will get an EPOCH entry in the local database, and thus the new pacman with epoch won't reinstall them by mistake on the first -Su. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-12-10Fix possible null pointer deref in check_archDan McGee
If we have a corrupted database, a package can come through without an arch, causing the code to blow up when making strcmp() calls. It might even be possible with perfectly valid database entries lacking an 'arch =' line. This behavior was seen as at least one of the problems in FS#21668. Ensure pkgarch is not null before doing anything further. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-08Small update to Russian translationSergey Tereschenko
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-11-04Support reading package args from stdinDave Reisner
Only occurs if no arguments were provided directly. Arguments can be separated by any amount of valid whitespace. This allows for piping into pacman from other programs or from itself, e.g.: pacman -Qdtq | pacman -Rs This is better than using xargs, as xargs will not reconnect stdin to the terminal. The above operation performed using xargs would require the --noconfirm flag to be passed to pacman. Signed-off-by: Dave Reisner <d@falconindy.com>
2010-10-28Add initial 3.4.2 NEWS draftDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-28Update Swedish translationTobias Eriksson
442 translated strings, no fuzzies, no untranslated. modified: po/sv.po Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-28PKGBUILD.vim: add special licenses BSD MIT ZLIB PythonXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-28Small updates to Spanish translationRicardo PĂ©rez
Also addresses FS#21373. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18Merge branch 'maint'Dan McGee
2010-10-18pactest: use valgrind.supp fileXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18Tests: '-S repo/group' syntaxJakob Gruber
when calling '-S repo/group', only group members in <repo> should should be installed (group members in other repos are ignored) Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18Tests: Sync group which includes ignored pkgsJakob Gruber
* FS#19854 (--ignore is ignored with groups) * http://www.archlinux.org/pipermail/pacman-dev/2009-June/008847.html (operation aborts when a package from a group is ignored/and user chooses not to install it) If a group member is ignored, we expect a) a question whether to install b) after saying 'no' to a), the ignored member not to be installed c) all other group members to be installed d) pacman to execute successfully Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18alpm/sync: very small memleak fixXavier Chantry
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-18libalpm/remove: fix funny progress bar problem with empty packagesXavier Chantry
$ pacman -Rd kde-meta Remove (15): kde-meta-kdewebdev-4.5-1 [0.00 MB] kde-meta-kdeutils-4.5-1 [0.00 MB] kde-meta-kdetoys-4.5-1 [0.00 MB] kde-meta-kdesdk-4.5-1 [0.00 MB] kde-meta-kdeplasma-addons-4.5-1 [0.00 MB] kde-meta-kdepim-4.5-1 [0.00 MB] kde-meta-kdenetwork-4.5-1 [0.00 MB] kde-meta-kdemultimedia-4.5-1 [0.00 MB] kde-meta-kdegraphics-4.5-1 [0.00 MB] kde-meta-kdegames-4.5-1 [0.00 MB] kde-meta-kdeedu-4.5-1 [0.00 MB] kde-meta-kdebase-4.5-1 [0.00 MB] kde-meta-kdeartwork-4.5-1 [0.00 MB] kde-meta-kdeadmin-4.5-1 [0.00 MB] kde-meta-kdeaccessibility-4.5-1 [0.00 MB] Total Removed Size: 0.06 MB Do you want to remove these packages? [Y/n] ( 1/15) removing kde-meta-kdewebdev [------------------------] 100% $ it stopped here.. On one side, libalpm did not initialize the progress bar at 0 percent. So with meta-packages that have 0 files, there was only one progress bar call with percent == 100. On the other side, pacman callback kept track of the last percent that it received. When there are only meta-packages, we always received only 100, so pacman believed the progress bar needed not update. Thus only the first package was actually displayed. A proper fix for the callback would be to keep track of last package name to make sure the recorded prev percent applies. But since we now specify that both Add and Remove should at least send percent=0 at beginning and percent=100 at the end, there is no need for that. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14be_package: read force entry and convert to epochXavier Chantry
We still need to read force entry in epoch-aware pacman, so that when we install an old force package, EPOCH gets written to the local db. Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-14bash_completion: remove upstream deprecated functionsCarlos Diaz
Populate $cur and $prev with the new bash-completion 1.2 function, _get_comp_words_by_ref. _get_cword and _get_pword have been deprecated. Signed-off-by: Carlos Diaz <839273@gmail.com>
2010-10-13Merge branch 'maint'Dan McGee
2010-10-13Add several pactests for epoch codeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Add epoch verification to makepkgDan McGee
If defined, it must be an integer. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Update contrib/ for epochDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Add epoch support to pactestDan McGee
This adds epoch support to pactest, while still producing packages and database entries the same way makepkg and repo-add currently do in a backward compatible fashion (still including the 'force' option). Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Make repo-add and makepkg epoch-awareDan McGee
Allow it to be a variable in the PKGBUILD as well as propagating it through to the built package and the package database. We leave some backward compatibility in place by placing the '%FORCE%' option in the database if the package contains an epoch; this will be used by older versions of pacman and more or less ignored by versions that use epoch. Signed-off-by: Dan McGee <dan@archlinux.org>
2010-10-13Update documentation to reflect new epoch package variableDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>