| Age | Commit message (Collapse) | Author |
|---|
|
If you are keeping a copy of the old database, you probably want
to keep a copy of its signature too. Also, delete the previously
backed-up database signature if no new one is being copied.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We did some funny stuff here before to allow specifying fully-qualified
package names, such as 'testing/gcc' or 'core/gcc'. However, it was done
by duplicating code, not to mention an early escape if a repository
could not be found for an early target. Something like `pacman -Si
foo/bar core/gcc' would not give expected results, although `pacman -Si
bar gcc' would.
Clean up the code, remove strncpy() usage, and clarify the error
messages a bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The lone quotation mark in "pacman's" causes issues for some syntax
highlighting. Change the printing of the nessage from echo to printf
so we can invisibly escape it.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The original concept for this script was a bash implementation, but
turned out to be unreasonable at the time due to the efficiencies of the
database format. Since those have been resolved, we can rewrite this in
bash as a much simpler script.
All the action happens in a single line, but we add extend this a
little, binding to gettext to keep our pacman translations intact.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The supposed safety blanket of this function is better handled by
explicit length checking and usages of strlen() on known NULL-terminated
strings rather than hoping things fit in a buffer. We also have no need
to fully fill a PATH_MAX length variable with NULLs every time as long
as a single terminating byte is there. Remove usages of it by using
strcpy() or memcpy() as appropriate, after doing length checks via
strlen().
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Allow command-line options to accept multiple arguments without
additional quoting by taking the list of arguments until one
starting with a "-" is reached.
The only current use of this is the --pkg option in makepkg. This
allows (e.g.)
makepkg --pkg foo bar
and packages "foo" and "bar" will be built.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows options specified with a trailing "::" to optionally
take arguments.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We can readily detect the first node in a list by checking if
node->prev->next is NULL. So there is no need to pass the head
of the list to this function and its prototype now looks like
all the other item accessors.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The only thing this accessor did was remove the const qualifier
given our entire list implementation requires passing around the
head anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
They are placeholders, but important for things like trying to re-sync a
database missing a signature. By using the alpm_db_validity() method at
the right time, a client can take the appropriate action with these
invalid databases as necessary.
In pacman's case, we disallow just about anything that involves looking
at a sync database outside of an '-Sy' operation (although we do check
the validity immediately after). A few operations are still permitted-
'-Q' ops that don't touch sync databases as well as '-R'.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Show output in -Qip for each package signature, which includes the UID
string from the key ("Joe User <joe@example.com>") and the validity of
said key. Example output:
Signatures : Valid signature from "Dan McGee <dpmcgee@gmail.com>"
Unknown signature from "<Key Unknown>"
Invalid signature from "Dan McGee <dpmcgee@gmail.com>"
Also add a backend alpm_sigresult_cleanup() function since memory
allocation took place on this object, and we need some way of freeing
it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The error code is in fact a bitmask value of an error code and an error
source, so use the proper function to get only the relevant bits. For
the no error case, this shouldn't ever matter, but it bit me when I was
trying to compare the error code to other values and wondered why it
wasn't working, so set a good example.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gives us more granularity than the former Never/Optional/Always
trifecta. The frontend still uses these values temporarily but that will
be changed in a future patch.
* Use 'siglevel' consistenly in method names, 'level' as variable name
* The level becomes an enum bitmask value for flexibility
* Signature check methods now return a array of status codes rather than
a simple integer success/failure value. This allows callers to
determine whether things such as an unknown signature are valid.
* Specific signature error codes mostly disappear in favor of the above
returned status code; pm_errno is now set only to PKG_INVALID_SIG or
DB_INVALID_SIG as appropriate.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
lib/libalpm/be_local.c
lib/libalpm/be_package.c
lib/libalpm/conflict.c
lib/libalpm/diskspace.c
lib/libalpm/dload.c
lib/libalpm/remove.c
|
|
We can take advantage of a few things on our new and improved filelist
in this code.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now that the filelists capture mode and size information, we can read
the data from there and prevent having to loop through and uncompress
every archive to check required diskspace usage.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows us to capture size and mode data when building filelists
from package files. Future patches will take advantage of this newly
available information, and frontends can use it as well.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This saves replicating the potentially large list of files in a package
that is being removed.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Helper function to get the previous item in a list
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We can just perform the same search operation on both lists.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This removes some of the repetition in the code for reading and parsing
database file lines.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We passed in 'line', but not 'buf.line'. In addition, the macros
building off of READ_NEXT() assume variable names anyway. Since we only
use these macros in one function, might as well simplify them.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Change the check into a loop over all signatures present and returned by
GPGME. Also modify the return values and checks slightly now that I know
a little bit more about what type of values are returned.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows one to check if a database is valid or invalid.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is a convention that is widely followed in *nix and posix-ish
environments. We should follow it, too.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
libalpm can now cope with this as of commit 719e0d3ddb300.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is similar to what was just done for the sync databases. Move a few
pieces around so we never need to actually write out the filesystem to
create a package, and simply stream the tarfile out from the data we've
collected.
Once again, a few newline addition hacks and other things have to be
left in place in order not to break everything; this time however most
of the assumptions are in pactest and not libalpm.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is little need to expose the guts of this function even within the
library. Make it static in be_local.c, and clean up a few other things
since we know exactly where it is being called from:
* Remove unnecessary origin checks in _cache_get_*() methods- if you are
calling a cache method your package type will be correct.
* Remove sanity checks within local_db_read() itself- packages will
always have a name and version if they get this far, and the package
object will never be NULL either.
The one case calling this from outside the backend was in add.c, where
we forced a full load of a package before we duplicated it. Move this
concern elsewhere and have pkg_dup() always force a full package load
via a new force_load() function on the operations callback struct.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some of these are legit (the backup hash NULL checks), while others are
either extemely unlikely or just impossible for the static code
analysis to prove, but are worth adding anyway because they have little
overhead.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
vim recognises what type of shell script it's dealing with by looking at
the shebang. If detection fails it falls back to sh which doesn't
support some bash features. Adding a normal, possibly broken, shebang
which gets fixed by the Makefile allows vim to detect bash syntax.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
|
|
Modifying prefix caused tmp directories to be left behind after
running scriptlets, and the path '/' to be passed to _alpm_rmrf. Broken
in f01c6f.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|