Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2008-03-17Drop case insensitive comparisons in the config parsing.Chantry Xavier
These case insensitive comparisons didn't work in some locales, like tr_TR where upper(i) != I. So a second case sensitive comparison had to be made for each directive. Only keeping case sensitive comparisons make the code cleaner and treat all locales equally. Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html Also fix pactests to use the correct case. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-16Add zipman makepkg option.Chantry Xavier
All other steps in tidy_install function were already controlled by an option in makepkg.conf, so this patch adds an option for the man page compression step too. This will allow to keep man pages uncompressed, which is required for some special meta man page, like the zshall one (see FS#4580). Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-10Add -Rss optionNagy Gabor
* -Rss removes all dependencies (including explicitly installed ones). * updated documentation * two pactest files added to test the difference between -Rs and -Rss Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
2008-03-10Remove trans->targetsNagy Gabor
Its implementation was quite broken: * add_loadtarget() might have silently filtered out some targets when replacing an older version. * This was used in sync.c to determine whether a target is implicit or not, which is incorrect behavior. Before this patch we silently removed user confirmed replacements; now we always warn on a replacement. * remove001.py behavior was quite odd in adding same target 5 times to the target list, we can change this behavior to be a failure. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Xav: changed remove001 pactest accordingly] Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: rewrote commit message] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-10makepkg: Support for resuming source downloadsRoman Kyrylych
Download to *.part and remove the suffix if successful, thus md5sums will be checked only for complete files, and next time makepkg will resume downloading of partial file instead of complaining about invalid md5sums. Old DLAGENTS format is still supported. Late fix: Do not try to download %u first The output of grep was not suppressed, thus the output of get_downloadcmd was wrong because of extra line at the beginning that contained an unsubstituted (with %o and %u) entry from DLAGENTS. Signed-off-by: Roman Kyrylych <roman@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-09Merge branch 'maint'Dan McGee
Conflicts: configure.ac
2008-03-09Refactoring of the download code.Chantry Xavier
This should be the main step in the download refactoring initiated by commit 81a2a06818d367f8528c74311171417beb9e1592. The stub functions introduced by that commit were implemented. The big download code was mostly composed of two steps, and so it has been naturally splitted in two functions : download_external and download_internal file:/// urls are now handled manually, instead of forcing the use of the internal downloader. Thanks to Dan for fixing the remaining issues and cleaning up the patch :) Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-09Use sigaction instead of signal.Chantry Xavier
From signal man page : "The behavior of signal() varies across Unix versions, and has also varied historically across different versions of Linux. Avoid its use: use sigaction(2) instead. See Portability below." The code was taken from there : http://www.gnu.org/software/libtool/manual/libc/Sigaction-Function-Example.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-09src/pacman/pacman.c : split cleanup function.Chantry Xavier
This function was used in two different ways : - as a signal handler : the argument was the signal number - called manually for freeing the resources : the argument was the return value So the first part is now handler(int), and the second cleanup(int). Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011388.html Remaining problems : - the return values are messy. for example, 2 can mean both that it was interrupted (SIGINT == 2), or that --help or -V was used (returned by parseargs). - apparently signal is not portable and sigaction should be used instead Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-09Remove a bogus comment from libalpm/remove.cNagy Gabor
We do the opposite. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
2008-03-08rename vimproject to vimprojects and update it.Chantry Xavier
There is no need to put the list of files in there, which will get outdated sooner or later. It's possible to generate the filelist in the plugin itself using \r. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> [Dan: add scripts/ directory] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-08Remove useless TESTS fileDan McGee
This hasn't been updated in forever, and a simple python program could regenerate it anyway. Or even grep. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-08Remove frontend add code that is no longer necessaryDan McGee
Change the pacman_upgrade stub function to do what pacman_add used to do so we can eliminate pacman_add. Move the code to the more-descriptive name of upgrade.c. Note that we have made no changes to the backend libalpm, where an ADD type transaction could still be supported. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-08Remove the Add option from the command lineDan McGee
There is still a lot of code that could be cleaned up internally. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-08Move -A pactests that are relevant to -U, clean the rest outDan McGee
This is in anticipation of removing the -A/--add option from the pacman frontend. I've went through each of the pacman pactests that used the -A operation and decided whether they were worth keeping, whether there was already an upgrade test doing the same thing, or whether it should be moved over. The GIT rename log should make several of the moves obvious, but for those that were deleted: add001: handled by upgrade004 add002: worthless add004: worthless add010: handled by upgrade011 add050: handled by upgrade010 Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-08Updates to Russian translationSergey Tereschenko
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-06Updates before 3.1.3 releasev3.1.3Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-06New alpm_version functionNagy Gabor
Now pacman frontend uses this function instead of the compile-time libalpm version number. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: fix one more spot where LIB_VERSION was used] Signed-off-by: Dan McGee <dan@archlinux.org> (cherry picked from commit 49197b7492d61bf1fc6bef59a708f4f586f32edb)
2008-03-04Update Czech translationVojtěch Gondžala
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-04Update TRANSLATORS file.Chantry Xavier
* Vojtěch has a new email address * New pt_BR translator needed : http://www.archlinux.org/pipermail/pacman-dev/2008-March/011313.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-04Remove a bogus commentNagy Gabor
This comment was created for the old provision version format and needless. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-03Kill all of the line numbers from the translationsDan McGee
Hopefully the last of the huge commits ever. This also adds the c-format tag to all of the translated messages. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-03Disable the line number in .po files.Chantry Xavier
Add the --no-location xgettext option to disable the line numbers. They are not very useful, and generate a huge number of pointless line changes on every update. Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011332.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-03Update manually the only newline change for 3.1.3.Chantry Xavier
We only had one string change, and just a newline, so we can actually make this update in its own commit rather than updating pacman.pot and making a huge number of line changes, and then letting every translator do this newline fix separately. Signed-off-by: Chantry Xavier <shiningxc@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-03Convert Hungarian translation translation to UTF-8Dan McGee
The issue was discussed in this thread on the mailing list: http://archlinux.org/pipermail/pacman-dev/2008-March/011324.html In addition, the GNU gettext manual states that translation encoding is completely separate from the encoding used by the users of the translation. It makes sense for our project to use UTF-8 for all translations, regardless of the preferred encoding used by users of a certain language. This allows all contributors to more easily edit a translation file if necessary and not have to worry about codepage issues. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-03Small update to German translationMatthias Gorissen
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-02contrib/PKGBUILD.vim: add optdepends + other fixesChantry Xavier
* Add optdepends keyword * license, backup and arch keywords should be arrays * Remove the little hack to color conflicts/provides/replaces keyword even without =(). These should be arrays too. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-03-01New alpm_version functionNagy Gabor
Now pacman frontend uses this function instead of the compile-time libalpm version number. Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: fix one more spot where LIB_VERSION was used] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-01NEWS updates for 3.1.3Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-01testpkg reworkNagy Gabor
* mainly code cosmetics (indent fixes) * remove debug message "spam" * print also user friendly result Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> [Dan: a few more whitespace/linebreak cleanups added] Signed-off-by: Dan McGee <dan@archlinux.org>
2008-03-01Merge branch 'maint'Dan McGee
2008-03-01Set a missing pm_errno in _alpm_pkg_load()Nagy Gabor
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-28contrib: add 'groups' keyword to PKGBUILD.vimDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-27libalpm: clean up of md5sum functions.Chantry Xavier
test_delta_md5sum and test_pkg_md5sum were simple wrappers to test_md5sum, and only used once, so not very useful. I removed them. Also, test_md5sum and alpm_pkg_checkmd5sum functions were a bit duplicated, so I refactored them with a new _alpm_test_md5sum function in libalpm/util.c Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-27Start removing some junk from the function templateDan McGee
I screwed up originally when I accepted the TotalDownload patch, 8ec27835f40e3df1ce409bc3d913587c474a30c3. I didn't realize how deeply it modified libalpm and I probably shouldn't have let it do what it did. This commit reverts much of what that patch added in order to clean up our internal function calls. We can find another way to do it right down the road here but for now it has to go. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-27libalpm/dload.c : memleak fixes.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-27clean up dltotal leftover from 81a2a06818d367f852.Chantry Xavier
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-27Remove small remnant of old force=y optionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-25Merge branch 'maint'Dan McGee
Also bump the devel version on the master branch to 3.2.0devel.
2008-02-25Bump pacman version to a devel release and next version numberDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-25Update simplified chinese (zh_CN) translation.甘露(Lu.Gan)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-25fix two broken translated strings.Chantry Xavier
Using c-format on every strings allowed me two found two broken ones. One was harmless, but the other caused a segfault, as reported in FS#9658. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-25xgettext : change pass-c-format flag to c-format.Chantry Xavier
Currently xgettext apparently attempts to autodetect c format strings (eg a string with a %s) to decide whether to use c-format flag or not. If we use --flag=_:1:c-format instead of --flag=_:1:pass-c-format, the c-format will be applied everywhere. I couldn't find this documented anywhere though. But the pass prefix is mentioned here : http://www.gnu.org/software/gettext/manual/html_node/xgettext-Invocation.html#xgettext-Invocation "Specifies additional flags for strings occurring as part of the argth argument of the function word. The possible flags are the possible format string indicators, such as ‘c-format’, and their negations, such as ‘no-c-format’, possibly prefixed with ‘pass-’." And c-format is documented there : http://www.gnu.org/software/gettext/manual/html_node/c_002dformat-Flag.html#c_002dformat-Flag "This situation happens quite often. The printf function is often called with strings which do not contain a format specifier. Of course one would normally use fputs but it does happen. In this case xgettext does not recognize this as a format string but what happens if the translation introduces a valid format specifier? The printf function will try to access one of the parameters but none exists because the original code does not pass any parameters." And that's exactly what happened with FS#9658. So using c-format for every string will prevent this issue from happening again. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-25Remove done and failed msg when loading targets.Chantry Xavier
This change is similar to the one made in 3017b71cb5cde3aef7e0efb5f49843cccf759956. We had a "loading package data..." message, followed by either "failed" or "done", but it didn't take into account that other warnings / questions could be displayed between. Ref: http://archlinux.org/pipermail/pacman-dev/2008-January/010971.html Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-24Remove pmserver_t abstractionDan McGee
Remove what was a pretty weird abstraction in the libalpm backend. Instead of parsing server URLs as we get them (of which we don't usually use more than a handful anyway), wait until they are actually used, which allows us to store them as a simple string list instead. This allows us to remove a lot of code, and will greatly simplify the continuing refactoring of the download code. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-24Add new stub download functions for use throughout the codeDan McGee
Add new stub functions that work by calling the existing (terrible) download forreal function, which needs a serious overhaul. Hide the existing functions and switch all former users to the new functions. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-24Move download code out of server.cDan McGee
This is the first in what will be a series of patches to clean up the current download code in libalpm. Start by moving download code out of server.c and into download.c. Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-24Improve yesno function.Chantry Xavier
Add a preset paramater to yesno function saying which answer should be the default. Ref: http://www.archlinux.org/pipermail/pacman-dev/2007-June/008470.html This allows us to answer no by default to some questions, like the -Scc one mentioned in the above thread, and implemented by this patch. Another advantage is that we don't have to repeat the [Y/n] in every questions. It's only put once in yesno function. This highly reduces the chances that YES and NO strings are translated, but not some questions, which lead to obvious confusions. Finally, the noconfirm variable only needs to be used in that yesno function. So all other usages of it were removed. Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
2008-02-24More cleanup to alpm_listDan McGee
* Remove some #include statements that are not strictly necessary * Remove node_new function that is really just a one-liner Signed-off-by: Dan McGee <dan@archlinux.org>
2008-02-25alpm_list.c clean-upNagy Gabor
* Introduces 'list == NULL' convention for empty list. That means alpm_list_new isn't needed anymore, so kill it * Small straightforward fixes in alpm_list.c Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu> Signed-off-by: Chantry Xavier <shiningxc@gmail.com>