Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-02-13Move ROOTDIR definition into config.hAllan McRae
This was the only variable of its kind when a define was done on the compiler command line. Move it into config.h instead. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13Allow specifying shell for running scriptletsAllan McRae
Some distributions insist on using bash specific commands in their install scripts under the assumption that "sh" is a symlink to bash. This can causes issues if (e.g.) their users what to change sh to point at another shell, such as dash, that does not support these features. Add a configure option to explicitly set the shell being used to run install scripts. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13use _alpm_access in a few more places for increased debugging infoFlorian Pritz
pacman -U <pkg> returns a bogus "could not find or read package" if the file is on a fuse file system that doesn't allow root access. Debug output isn't very helpful here either so we should log why the access check failed. The other 2 checks already log something when failing so logging a more specific error won't hurt either. Signed-off-by: Florian Pritz <bluewind@xinu.at> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-13lib/sync: use full delta size as max download sizeDave Reisner
The max filesize for a delta download must be the full size of the delta file, not just what's remaining. Fixes FS#28345 Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-114.0.2 release updatesv4.0.2Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11Final pre-release Transifex updatesDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11pactree: allow comments after repo section headerAllan McRae
Duplicate the fix in config file parsing from d95c0494. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11makepkg: disable extglob when sourcing BUILDSCRIPTAllan McRae
PKGBUILDs are advertised as being pure bash so it would be expected that the default bash options are in effect when sourcing it. This inadvertantly "fixes" FS#27780 where enabling extglob causes the bash parser to error on non-valid bash function names like package_libxml++(). Note that these function names are unsupported in bash and could break again even with this "fix" in future bash releases. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-11makepkg: deal with mercurial exit codesAllan McRae
From mercurial-2.1, "hg pull" returns 1 when there are no updates. Catch the return code and either pull the update or return an error as appropriate. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Fix a handful of comment typos or misspellingsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Translation updates from Transifex, mostly scriptsDan McGee
This is after some manual massaging to fix issues with newlines in some translations of the script catalogs. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/alpm_list.c
2012-02-06makepkg.sh.in - if both -r and -i are provided, only remove makedepsAndrew Gregory
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06ALPM API adjustments for sanity and consistencyDan McGee
This makes several small adjustments to our exposed method names, and in one case, parameters. The justification here is to make methods less odd in their naming convention. If a method takes an alpm_db_t argument, the method should be named 'alpm_db_*', but perhaps more importantly, if it doesn't take a database as the first parameter, it should not. Summary of changes: alpm_db_register_sync -> alpm_register_syncdb alpm_db_unregister_all -> alpm_unregister_all_syncdbs alpm_option_get_localdb -> aplpm_get_localdb alpm_option_get_syncdbs -> aplpm_get_syncdbs alpm_db_readgroup -> alpm_db_get_group alpm_db_set_pkgreason -> alpm_pkg_set_reason All methods keep the same argument list except for alpm_pkg_set_reason; there we drop the 'handle' argument as it can be retrieved from the passed in package object. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06alpm.h: enum cleanups, comment formatting cleanupDan McGee
Don't use trailing commas in enums if people really want to use a strict C89 compiler, and document why on earth one particular enum uses bitmask values when it doesn't seem necessary. With comments, shoot for more consistency. When something is a one-liner, keep it that way and move the whole /** sequence */ to one line. When it needs more than one line, ensure we format most of them in a similar fashion. Two minor function signature adjustments are made that don't change anything other than matching the parameter name (name -> filename) and fitting in with our coding style (type* var -> type *var). Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Remove last explicit include of config.hDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06Update translations from TransifexDan McGee
The pacman-scripts catalog is omitted here due to various newline errors I don't have the time to fix right now. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06remove.c: make "target not found" error consistent with sync.cAndrew Gregory
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06makepkg.sh.in - fix remove_deps test for deps to be removedAndrew Gregory
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-06makepkg: add forgotten newline in help outputMantas Mikulėnas
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03pactest: check return code in some upgrade testsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03Add simple integer-only pow() implementationDan McGee
We hardly need the complexity (or slowness) provided by the libm power function; add a super-cheap one that suits our needs and is specialized for the values we plan on passing in. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-02-03Fix FS#27924: don't display negative zeroesThomas Dziedzic
Dan: don't compute lower bound unless needed, flip argument order so out values are last, add param Doxygen documentation. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31makepkg: Fix non-writable SRCPKGDEST error messageAllan McRae
Provide a helpful error message for when creating a source tarball and SRCPKGDEST is not writable. Fixes FS#28197. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-31Fix rare segfault on package removalAllan McRae
Very rarely a segfault would occur when removing a number of packages due to a corrupted list for the local database (FS#27805, FS#28195). This was caused by the alpm_list_msort function not correctly dealing with the two new head node's prev values. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Merge branch 'maint'Dan McGee
Conflicts: scripts/makepkg.sh.in
2012-01-30pacman-key: call gpg fewer times for revocation keysDave Reisner
Instead of iterating over the revocation keyfile and calling gpg once for each key, map the file into an array and call gpg once, iterating over this output to mark each key as revoked. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30pacman-key: simplify trusted keyring iterationDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Update translationsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Update pot translation catalogsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30Make a few more copyright date tweaksDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30scripts: always use printf with embedded gettextDave Reisner
This addresses two problems: 1) echo's behavior is inconsistent when dealing with flags, and can potentially be problematic. $ echo -n $ echo -- -n -- -n 2) Always using the end of options markers prevents translated strings from throwing errors, as shown in FS#28069. The remaining "inconsistencies" are because printf is being used in a guaranteed safe manner, e.g. printf '%s\n' "$(gettext "--this can never break")" Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-30makepkg: workaround for zipman issuesAllan McRae
This "fixes" two issues: 1) MAN_DIRS contains a glob by default so should not be quoted. It is not quoted anywhere else so this should not cause breakage... 2) the find statement returns 1 when some of MAN_DIRS are missing. This appears to only be exposed when running makepkg as root (which it appears some wrappers do...). Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23makepkg: check for license when creating srcpackageDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-23makepkg: abstract license check into separate functionDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2012-01-23Remove rmrf implementation from backendDan McGee
This moves the code for removal of local database entries right into be_local.c, which was the last user of the rmrf() function we had in our utility source file. We can simplify the implementation and make it non-recursive as we know the structure of the local database entries. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23libalpm/deps.c: access trans flags directlyDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Merge branch 'maint'Dan McGee
Conflicts: lib/libalpm/diskspace.c src/pacman/util.h
2012-01-23lib/dload: give uniform naming to curl CB functionsDave Reisner
Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23Fix sys/mnttab.h header includeDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23lib/dload: enforce usage of TCP keepalivesDave Reisner
This is particularly important in the case of FTP control connections, which may be closed by rogue NAT/firewall devices detecting idle connections on larger transfers which may take 5-10+ minutes. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23makepkg: restrict usage of flags passed to pacmanAllan McRae
With pacman-4.0, using --noconfirm or --noprogressbar with -Q or -T results in pacman reporting an "invalid option" error. Restrict the passing of these options to pacman. Fixes FS#28012. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-23makepkg: fix error on unnecessary -rAllan McRae
The grep statement used to check for a difference between the installed package list before and after resolving dependencies returns 1 if there is no difference. This sets of the error trap when "-r" is used "unnecessarily". Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19contrib/bash_completion: don't print stderr messagesDan McGee
If you are a crazy developer like me and have bogus options in your pacman.conf file, the tab completion gets messed up by the output on stderr. Suppress it. Fix the same basic issue in zsh_completion, thanks to the work by Florian Pritz <bluewind@xinu.at>. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-19Add diskspace checking support for Solaris/IllumosDan McGee
Was able to get my hands on one of these boxes today, so add yet another new way of doing this. I'm glad these calls are so standardized. This was compile tested on Linux and Illumos and seems to still be working in both places. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Update copyright on changed files since beginning of yearDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Allow UseDelta option to specify a delta ratioDan McGee
Rework the frontend and backend to allow passing a ratio value in for UseDelta rather than having a hardcoded #define-d 0.7 value always used. This is useful for those with fast connections, who would likely benefit from tuning this ratio to lower values; it is also useful for general testing purposes. The libalpm API changes for this, but we do support the old config file format with a no-value 'UseDelta' option; in this case we simply use the old default of 0.7. We clamp the ratio values to a sane range between 0.0 and 2.0, allowing ratios above 1.0 for testing purposes. Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18util.c, rmrf(): only create string when neededOlivier Brunel
The entry's name is only used when not "." or ".." so only print the string then. Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Fix missing [removal] outputAllan McRae
Currently, a transaction is considered to be purely package removal until the first package install is found. This resulted in the removed packages at the start of a combined upgrade/removal transaction not getting the "[removal]" output. Fixes FS#27981. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2012-01-18Improve exit statuses and error messages in pacman-keycanyonknight
Return codes from gpg commands are currently lost. This adds the functionality of taking non-zero exit statuses from gpg. This includes error reporting for all gpg commands that are run individually, run in a loop, and run through a pipe. Includes the check_keyids_exist function which verifies a key exists locally prior to attempted local manipulation of the key. If a gpg command has a non-zero status, pacman-key will now exit with a non-zero status. It will print a gettext error message of gpg's failure. Signed-off-by: canyonknight <canyonknight@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>