Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-03-14Revert "makepkg: Use a recursive git clone."Allan McRae
This reverts commit 8b03b1a8776043978aeac31682f94d65b4f3e514. It is much better to download the submodules using separate source entries and adjust the submodule configs to point at these versions in the prepare() function. See https://mailman.archlinux.org/pipermail/pacman-dev/2013-March/016771.html for an example. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14doc: consistent formatting for pacman.conf optionsWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14doc: Fix pacman-key title formattingWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14doc: Fix pacman.conf formattingWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14Add compression defaults for lrzip and lzoAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14Add Local/RemoteFileSigLevel to example configAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14pacman.conf: Remove empty line at end of fileEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14makepkg.conf: Add staticlibs to default OPTIONS array in commentsEric Bélanger
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14Save and restore old locale when manipulating via setlocaleDan McGee
We shouldn't assume a frontend program didn't explicitly set the LC_TIME setting to a value not in the environment, which is what we previously assumed. Save the old locale before forcing the 'C' locale and restore it when we are done. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14Use C locale when parsing UseDelta floating point valuesDan McGee
We should save the current locale, use the 'C' locale during parsing, then restore the original locale. Config files should always parse regardless of the current user's locale setting. Fixes FS#34253. Signed-off-by: Dan McGee <dan@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14alpm/remove.c: add newlines to debug outputAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14pkgdelta: fix improper passing of file argumentDave Reisner
Looks like I hosed this pretty hard in 5a5e712c749edb8. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-14zsh completion: Add new makepkg optsWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10Update all translations files to push to TransifexAllan McRae
Run update-po and fix the few errors reported. Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10Remove all leading :: from pacman translationsAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10Pull updated translations from transifexAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10Add new languages from TransifexAllan McRae
Languages: eo, nl, hr, ko, ja, fa, ar, sl, gl, id Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10update transifex configAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10fix distribution of contrib filesAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10distribute library/term_colors.shAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10Bump to version 4.1.0rc1v4.1.0rc1Allan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: add support for all longopts commandsDaniel Wallace
add all the longopts for the operations and allow for them to be completed just like shortopts Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: include flags that can be doubledDaniel Wallace
include the flags that could be doubled up like -Sii -Syy -Suu -Qii etc also include the long opts of all the commands Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: fix doubling up of specific variablesDaniel Wallace
-i -y -u -d -s etc, so that they do not disappear In the future I hope there is an easy way to limit it to just 2, right now the *- makes it so that it can be added as many times as you want. Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: add --color to completionDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: make sure all indentions are tabsDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: use consistent case statement styleDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: fix stacked completionDaniel Wallace
Before this, if you do pacman -Sy<tab> it completes to -y. Now, with -S and the other operations in the actual option _arguments, it won't remove the operations. Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10zsh completion: add deptest and databaseDaniel Wallace
Signed-off-by: Daniel Wallace <danielwallace@gtmanfred.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10testdb: quote output substitutionsAndrew Gregory
Quoting output substitutions makes whitespace errors such as FS#30101 much more obvious: old: missing perl-test-pod dependency for perl-test-output new: missing 'perl-test-pod ' dependency for 'perl-test-output' Several of the quoted substitutions should not be capable of containing whitespace in theory, but this errs on the side of caution as the point of the tool is to find error conditions. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10testdb: pass empty local pkglist to alpm_checkdepsAndrew Gregory
Passing the local package list to alpm_checkdeps as both the local packages and packages to be upgraded did nothing but cause extra overhead as the packages were all removed from the installed package list because they were being upgraded. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10pmpkg: add missing directories to test packagesAndrew Gregory
Several tests require complete file lists in order to provide accurate results. These can be non-obvious. Adding missing parent directories helps insure the integrity of tests against human error. Filling in parent directories also allows us to check that file lists are actually valid. There didn't seem to be a good place to do this that was always guaranteed to be run, so this adds a finalize() function to packages that will always be run before the package is actually used to allow for this type of tidying. Fixes FS#30723 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10makepkg: Add --verifysource to only download/verify source filesOlivier Brunel
Because --noextract also implies to not download/verify source files, it wasn't possible to simply do that, without either extracting and/or building. (Note: --verifysource takes precedence over --noextract) Signed-off-by: Olivier Brunel <i.am.jack.mail@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10makepkg: Make VCS download functions use get_filenameNeer Sighted
Make all VCS download functions uses get_filename to get the repo name. In addition, creating a working directory from a Bazaar repository now shows the short-name of the repository, not the full path on disk. I'm not sure if the name of the variable that holds the basename of the local clone should still be `repo`, but I have left the variable name for simplicity. Signed-off-by: Neer Sighted <neersighted@myopera.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10makepkg: Separate vcs download and extractWilliam Giokas
Previously makepkg would clone vcs sources in the download function, regardless of the noextract settings. Now the download_* functions only download or update the vcs sources, and the new extract_* functions just create working copies using the specified protocols. The extract_sources function will call the needed extract function for the protocol specified. The tarball extraction has also been moved into its own extract_file function to keep things consistent. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10make paclog-pkglist understand 'downgraded'Simon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10make status/log messages reflect version changeSimon Gomizelj
Currently pacman either prints 'adding' or 'upgrading' when installing a package. This make pacman print and log the other possible actions: 'downgrade' and 'reinstall' Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10bash_completion: update for colorAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10remove the duplicate strnlen and strndupSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-10libalpm/sync: remove useless intermediate variableDave Reisner
This also rearranges some code to ensure that declarations and code aren't mixed. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08contrib: Add color to paccacheWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08contrib: Add color to bacmanWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08contrib: Make pacdiff colors the same as makepkgWilliam Giokas
Added an `ask` message function that emulates pacman's appearance. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to repo-addWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pkgdeltaWilliam Giokas
Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pacman-optimizeWilliam Giokas
Color enabled by default, use --nocolor to disable colored output. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pacman-keyWilliam Giokas
Use --nocolor to suppress colored output from pacman-key, otherwise output will be in color. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to pacman-db-upgradeWilliam Giokas
Color enabled by default, use --nocolor to turn off colors. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-08scripts: Add color to library/output_format.shWilliam Giokas
Use the same colors as makepkg in messages. Add in the 'plain' function as well. To use the colors, you need to include the term_colors.sh file, or add definitions for the colors explicitly. Signed-off-by: William Giokas <1007380@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2013-03-07update documentation and config filesSimon Gomizelj
Signed-off-by: Simon Gomizelj <simongmzlj@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.