| Age | Commit message (Collapse) | Author |
|---|
|
Two recent commits slightly broke the translations, so this fixes all of
them.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Several pieces of information were outdated for the 3.2 release. Add a
section for the API changes between 3.1 and 3.2.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: small updates/grammar corrections]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Xavier started the job, this should clean it up and get it up to date that
final bit.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The submitting patches page needed a bit of updating. It was currently a
mash-up between the pre and post git eras.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#9486.
source /etc/profile instead of all individual files in /etc/profile.d/*
(which is done by /etc/profile anyway).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This option wasn't used.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This makes the fileconflict004.py test complete.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Giovanni Scafora <linuxmania@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will allow the return code of pactest to be useful, for such things as
use in a git-bisect test script.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will enable us to mark tests we know currently fail to differentiate
them from those that we know should pass. Regressions should be easier to
spot this way.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: updates of my own + some from ML]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#2334.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
[Dan: add some comments to the code]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes FS#7794.
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had a lot of duplicated code here. The code handling the showsize option
needed to be there three times :
1) for install part of -S
2) for remove part of -S (conflict removal)
3) for -R
This patch introduce a new display_targets(pkglist, install) function which
can handle the 3 cases above. We pass install == 1 for case 1), and install
== 0 for case 2) and 3).
Now we can finally get the benefit of an old patch which handled the
ShowSize option consistently in the 3 cases above, without an awful lot of
duplicated code :
http://www.archlinux.org/pipermail/pacman-dev/2008-January/011029.html
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Our internal vercmp function was the only user of this, and it no longer
relies on it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Something such as "pacsearch foo|bar" would cause problems due to the
quoting being dropped. Adding quotes solves the problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The pkg_dup function shouldn't call any alpm_pkg_get_ accessors because
this can fill the old package with all INFRQ_DESC fields for example, and
this won't necessarily be reproduced in the new package (for all the fields
that were copied before).
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Pactree is a dependency tree viewer for installed packages.
It features both textual and graphic (through graphviz) output.
Script by: Carlo Bersani <carlocci@gmail.com>
[Allan: removed whitespace errors]
Signed-off-by: Allan McRae <allan@archlinux.org>
[Dan: killed some unnecessary lines, moved license header]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixed FS#9403. With this you can use "makepkg -sr", install the
dependencies, Ctrl+c during the makedepends installation and have
makepkg remove the installed packages on the exit. Previously makepkg
tried to also remove the makedepends which were not installed.
The deplist="" line in remove_deps is due to an obscure bug where local
varaibles from the handle_deps function seem stay in scope because we
never formally exited it.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This vercmp issue has been a sticking point but this should resolve many of
the issues that have come up. Only a few minor code changes were necessary
to get the behavior we desired, and this version appears to beat any other
vercmp rendition on a few more cases added in this commit.
This commit passes all 58 vercmp tests currently out there. Other 'fixes'
still fail on a few tests, namely these ones:
test: ver1: 1.5.a ver2: 1.5 ret: -1 expected: 1
==> FAILURE
test: ver1: 1.5 ver2: 1.5.a ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5-1 ver2: 1.5.b ret: 1 expected: -1
==> FAILURE
test: ver1: 1.5.b ver2: 1.5-1 ret: -1 expected: 1
==> FAILURE
4 of 58 tests failed
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With --quiet, "pacman -Sg grp" and "pacman -Qg grp" don't list group names.
Note that "pacman -Qgq" and "pacman -Sggq" (without targets) still list
group names becuase their output would not be very useful without them.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 874190827676e3a974e8c5fef6c51b9e9d6b60fa disabled --debug in these
cases. We just clear PM_LOG_WARNING flag now.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thread: http://www.archlinux.org/pipermail/pacman-dev/2008-July/012465.html
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Xavier Chantry <shiningxc@gmail.com>
|
|
This patch introduces a new STRIP_DIRS makepkg.conf option
to change makepkg's search path when stripping binaries.
Original work by: Thomas Bächler <thomas@archlinux.org>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Debug messages were removed from _alpm_sync_find, because it is a general
purpose function; debug messages should be placed in the caller function.
I inserted "adding package foo-1.0-1 to the transaction targets" debug
message to find_replacements and sync_sysupgrade.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Our STRDUP macro (used in _alpm_depmiss_new) is NULL safe.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
So if you want to remove NULL needle from a list, alpm_list_remove will
return with "not found".
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Before removing a package from target list (in remove_prepare_keep_needed),
we should check whether we have already removed it.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 8240da6cb3ff95ad480efe3e1876104024398fae broke some alpm hierarchy
and introduced a new memleak (trans->packages was never freed in case of add
transaction, even if the transaction wasn't committed), so it is reverted
now.
We follow a different approach to reduce memory usage:
_alpm_db_add_pkgincache doesn't duplicate the whole package before adding
it to the cache, only the package name and version (INFRQ_BASE).
This method needs very small extra memory (compared to the reverted method),
and after transaction commit we use less memory than before (since the
big 'files' fields are not copied to cache), this is useful in GUIs.
Note: The old add_pkgincache was a bit broken, since pkg->origin wasn't
filled in correctly.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Acked-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This method is equivalent with pacman's resolvedeps.
$dep can be any (versioned) dependency.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|