| Age | Commit message (Collapse) | Author |
|---|
|
Eases maintanence if we need to add further options in the future.
Extracted from a patch supplied by Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The combination of tabs and spaces is annoying in any editor that
does not use a tab width of 2 spaces.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From the fgets manpage:
fgets() reads in at most one less than size characters from stream and
stores them into the buffer pointed to by s. Reading stops after an EOF
or a newline. If a newline is read, it is stored into the buffer. A
'\0' is stored after the last character in the buffer.
This means there is no need at all to do 'size - 1' math. Remove all of that
and just use sizeof() for simplicity on the buffer we plan on reading into.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will allow downloads to reuse connections if possible, which could make
big differences on perceived FTP speed as the connection won't have to be
reestablished each time. For the most part, HTTP requests wouldn't be using
keep alive anyway so this won't have an effect there.
I'm not enthused about having to do this with the library initialization,
but there isn't a much better place due to the fact that the loop over
databases occurs on the frontend and not the backend.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When performing local testing, it may be useful to add PKGEXT='.pkg.tar'
to the PKGBUILD to save time, especially with big packages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Gettext has this whole 'Plural-Form' thing that until now we haven't taken
advantage of. Given that not all languages have the same plural form rules
as English, take advantage of it by defining a new _n() macro which will
normally define to ngettext(), and adjust a few messages as an example of
how to use.
There are surely other places where we do singular/plural logic without me
having noticed, so further patches are welcome to fix those up too.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Avoids letting the shell evaluate ! as something else (e.g. an alias).
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I'm not sure why it doesn't happen everywhere, but we need <sys/stat.h> for
umask and mkdir in this file. I hit this today:
cc1: warnings being treated as errors
util.c: In function ‘makepath’:
util.c:128:2: error: implicit declaration of function ‘umask’
util.c:141:5: error: implicit declaration of function ‘mkdir’
make[2]: *** [util.o] Error 1
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We no longer use these anywhere outside of sync.c, so do the rename and add
static to their definition to meet our coding standards.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As reported in FS#20221, we don't always do the right thing when installing
a group and using the --needed option. This was due to the code pulling
packages based on what was already in the transaction's add list, but
completely ignoring the fact that we may have already seen and skipped this
same package in an earlier repository.
Add a list to the private _alpm_sync_pkg() function that allows us to have
this extra information so we don't mistakenly downgrade a package when using
--needed.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The first step for resolving FS#20221. sync023 is the case from the bug
report; sync022 is already working fine but we have no tests at all that
test the --needed option in any form.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes repackaging issues when multiple package names are passed to the
--pkg option.
Signed-off-by: Dave Reisner <d@falconindy.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The sync db should be stored in the sync/ folder. This cleans up
DBPath to only have local/ and sync/ directories in it.
A nice side effect is that the db are now in the right place so we
can implement directly reading from them.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With commit 5dffef78, the repo database always has a symlink
of the form reponame.db. Use that filename and let libarchive
determine the compression type.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Prevents compiler warnings with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
scripts/makepkg.sh.in
|
|
Variables that are only meaningful within the function they are declared in are
now prefixed by "local".
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: fix whitespace]
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Nico Schottelius <nico@kr.ethz.ch>
Signed-off-by: Xavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will allow me to be not quite as lazy in getting website changes out
to the Arch Linux server by making it trivial to get everything packaged up
and working correctly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This fixes two issues:
1) using "sudo -l" results in excess password asking under certian
configurations. Revert to the pre 3.4 behaviour of always using
sudo if it is installed.
2) Properly escape the command so that that versioned dependencies,
such as "foo>4", do not get treated as output redirection when using
su. This also unifies the generation of the pacman line and its
privilege escalation.
Based on patches supplied by Andres P <aepd87@gmail.com> with minor
adjustments for suitability for the maint branch.
Original-work-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Because the shell gettext doesn't allow for positional gettext substitution,
be more careful about where we use it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Prevents compiler warnings when building with -D_FORTIFY_SOURCE=2
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Check that writing to destination file actually occurs in
_alpm_copyfile. Required adding a new error (PM_ERR_WRITE)
as none of the others appeared appropriate.
Prevents compiler warning when using -D_FORTIFY_SOURCE=2.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
When makepkg catches a command failure it currently prints "Aborting..."
and exits. Clarify the reason for aborting from packaging is a failure
during one of the PKGBUILDs functions.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The casting of nread is safe as it is tested to be >0 when it is
initally assigned. It is also being implicitly cast in the fwrite
call in the line above.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Attempt to find "du" from coreutils in the standard paths and if
not revert to the version in the users PATH. Using the full path
prevents issues such as FS#19932, where a different and incompatible
version of du is put earlier in the users path.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
The 'grep -R' in the $srcdir check would not only grep regular files,
but also devices, symlinks (that might potentially point outside of
$pkgdir), pipes and so on. Use find to ensure only regular files are
examined.
This should fix https://bugs.archlinux.org/task/19975
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
We were seeing some issues when trying to create our new database alias
using symlinks on certain filesystems (see FS#19907). Have a fallback method
in place where we first try a symlink, then a hard link, then just copy the
database if all else fails.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Eric Bélanger <snowmaniscool@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit 13748ca0529 inversed the nature of one test wherein the if clause would
throw a fatal error if a legitimate package function was defined in PKGBUILD.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
To avoid errors with bash 3.2, compopt will be skipped if it's not a
shell builtin.
compopt is needed to not append slashes to package names that
coincide with directories in PWD.
This is currently not possible to fix in bash versions that do not support
compopt, so these users will have to bear that regression.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Running "pacman -T foo" is expected to return a non-zero value when
"foo" is not installed. This sets of the error trap in bash-3.2 but
not bash 4.x. Work around this by disabling the error trap around
this pacman call as we are manually checking the return value anyway.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
If this is to be scripted with AIF or another tool, it needs to respect stderr.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Valid pacman configuration files do not have to start with a hash for that line
to be a comment, neither do directives need to be in column 0.
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
$replacedurl was being built from an expansion of itself. But at the time it
happened, it was empty.
Fixes FS#19911
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
|
|
Commit 3d67d9b1 introduced multiple bash4 string manipulations.
Revert those in order retain compatibility with bash-3.2 which
is still widely used.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Rather than say we can't find the target after saying "No, I guess I don't
want to install this", we should make sure the ignored status gets passed
all the way through. This fixes FS#19866.
Pactest is also included that failed before due to the fact that we normally
treat an unfound package as a reason to exit with a non-zero status.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Follow the HACKING guidelines and always use != 0 or == 0 rather
than negation within conditional statements to improve clarity.
Most of these are !strcmp usages which is the example of what not
to do in the HACKING document.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
pacman -Qq output is sorted according to the users LC_COLLATE
setting as is needed for comm.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: adjust commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Use strcoll to compare package names to provide output sorted
according to a users LC_COLLATE settings.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: added commit message]
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Instead of writing:
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Installing missing dependencies...
Just make it homogeneous:
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Installing missing dependencies...
Signed-off-by: Andres P <aepd87@gmail.com>
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Ease maintainace; the two parts that have been combined into a function were
identical.
Signed-off-by: Andres P <aepd87@gmail.com>
[Allan: rename function]
Signed-off-by: Allan McRae <allan@archlinux.org>
|