Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-12Extract a try_rename helper from extract_single_file()Dan McGee
This moves the repetitive (and highly unlikely) logging work to a single location. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Introduce alpm_time_t typeDan McGee
This will always be a 64-bit signed integer rather than the variable length time_t type. Dates beyond 2038 should be fully supported in the library; the frontend still lags behind because 32-bit platforms provide no localtime64() or equivalent function to convert from an epoch value to a broken down time structure. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12_alpm_parsedate: use strtoll() to parse numeric valueDan McGee
This prepares the function to handle values past year 2038. The return type is still limited to 32-bits on 32-bit systems; this will be adjusted in a future patch. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Bump version to 4.0.0v4.0.0Dan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-12Final Transifex update before 4.0Dan McGee
We have a few incomplete translations, but these should be addressable before the 4.0.1 maint release that is surely not that far in the future. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pactest: add a better descriptionDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Add note to TRANSLATORS regarding TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11pacman-key: don't escape single quote in usage messageDan McGee
This screws up gettext and causes the message to display always untranslated. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Document verifying source file signatures in makepkgAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Fix typo in PKGBUILD man pageAllan McRae
Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11PKGBUILD.vim: fix epoch syntax highlightinglolilolicon
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-11Update translations from TransifexDan McGee
In prep for the 4.0.0 release. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10dload: unhook error buffer after transfer finishesDave Reisner
Similar to what we did in edd9ed6a, disconnect the relationship with our stack allocated error buffer from the curl handle. Just as an FTP connection might have some network chatter on teardown causing the progress callback to be triggered, we might also hit an error condition that causes curl to write to our (now out of scope) error buffer. I'm unable to reproduce FS#26327, but I have a suspicion that this should fix it. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10pactree: Make error message smarter in register_syncs()Lukas Fleischer
Our error message used to be very unclear when the configuration file could not be found: $ ./pactree -lsr gtk error: failed to register sync DBs Instead, display an accurate message and include the file name: $ ./pactree -lsr gtk error: config file /usr/local/etc/pacman.conf could not be read Also, move the error message inside register_syncs() to allow for differentiating between different errors that might require a handler in the future. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10pactree: Add "--config" optionLukas Fleischer
This allows for specifying an alternate configuration file path, similar to pacman's "--config" option. Given that there is currently no other way to tell pactree to read from another configuration file (except for patching or symlinking), this seems totally sensible - even if there are plans to refactor and/or replace the standalone configuration file parser. We do not define a short option for the sake of consistency with pacman's set of command line options. Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-10makepkg: strip comments after pkgver/pkgrel when checking valueAllan McRae
Inline comments after pkgver or pkgrel would cause the sanity checks to fail so remove them before checking the value. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-07Format pacsort and vercmp testsuite outputAllan McRae
Make the output into a single block and add separators at the end so that they do not merge into each other. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06Update NEWS for 4.0.0 releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-06bacman: use globbing to get local package db pathlolilolicon
The original code- pkg_dir="$(echo $pac_db/$pkg_name-[0-9]*)" is problematic in several ways: - $pac_db and $pkg_name should be quoted, obviously. - It assumes pkgver always starts with an integer, while in fact it just can't contain ':' and '-'. Counterexample: the code breaks on lshw B.02.15-1. - It assumes there are no more than one directory matching the pattern. While this should be the case if everything works perfectly, it certainly relies on external conditions. Counterexample: if the local db contains two packages named foo and foo-3g, even if everything else is perfect, the code will match two directories. Don't make assumptions, use what is known. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: add tar.Z package creation supportlolilolicon
bacman should support whatever makepkg does as PKGEXT. Also remove obsolete $EXT variable. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: small code cleanuplolilolicon
This includes: - Quoting fixes. - Drop deprecated mktemp option -p. - Set extglob nullglob shell options at the top. - Use extended globbing instead of regex to match %HEADER% in pacman db. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: bashify using [[ ]] and (( ))lolilolicon
Another style change. The [[ expression ]] form is particularly cleaner, safer and more powerful than the [ expression ] form. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-06bacman: indent code using TABlolilolicon
As every piece of code in the whole project uses TAB as indentation character, bacman shouldn't be an exception. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-10-05Enable CheckSpace by default in default config fileDan McGee
This will have to be picked up downstream of course, but addresses FS#25684 now that this is a lot faster in 4.0 than it was in the original 3.5 implementation. Also make curl the first XferCommand listed, as we are moving away from any other download program at this point. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translation message catalogs in prep for 4.0 releaseDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Add a top-level 'update-po' make targetDan McGee
This makes the maintainer's life (read: my life) a lot easier when updating translation files to push to Transifex. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05Update translations from TransifexDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05pacman-key: treat foo-trusted as an ownertrust export fileDan McGee
This allows it to serve double-duty. In order to allow users to base verification decisions off of both a valid signature and a trusted signature, we need to assign some level of owner trust to the keys we designate as trusted on import. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-05pacman-key: refine and clarify import/import-trustdb behaviorDan McGee
* --import now only imports keys from pubkey.gpg and does not import owner trust; if you want to have both simply run the operations in sequence. * --import-trustdb has been simplified; it will overwrite existing values in the trust database as before, but there is no need to export it first as those values are safe if left untouched. * Fix the manpage referring to a non-existent option. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-04Parse '0' as a valid package installed sizeDan McGee
This was a bad oversight on my part, pointed out by Jakob. Whoops. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-10-03makepkg: create tar file for bogus PKGEXTlolilolicon
If PKGEXT is not one of the recognized tar*'s, create_package() would create an empty package file and fail, since bsdtar on the left side of the pipe returns 141 on SIGPIPE (broken pipe). This patch changes the behavior for an invalid PKGEXT. A warning is printed on stderr, and a tar file is created. Also retire the obsolete $EXT variable. Add the obligatory comment why we don't use bsdtar's compression. Finally, fix mixed-tab-space indentation. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Allan McRae <allan@archlinux.org>
2011-09-30Use _alpm_local_db_pkgpath in _cache_changelog_openDan McGee
Another place where we were doing the dirty work by hand. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30makepkg: support .tar.Z source packages creationlolilolicon
SRCEXT should allow whatever PKGEXT does. Also address an uninitialized use of $ret. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-30Revamp scriptlet path formation for scriptlets in local databaseDan McGee
Expose the current static get_pkgpath() function internally to the rest of the library as _alpm_local_db_pkgpath(). This allows use of this convenience function in add.c and remove.c when forming the path to the scriptlet location. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Refactor _alpm_runscriptlet()Dan McGee
Add an is_archive parameter to reduce the amount of black magic going on. Rework to use fewer PATH_MAX sized local variables, and simplify some of the logic where appropriate in both this function and in the callers where duplicate calls can be replaced by some conditional parameter code. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30paccache: proper quoting in [[ expression ]]lolilolicon
Always quote the right-hand side of expression when the == or != operator is used, unless intended as a pattern. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-30paccache: declare variables explicitlylolilolicon
Declare and initialize integer variables 'needsroot' and 'verbose'. Don't use the fact that (( undefined_variable )) evaluates to 0. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-30pacman-key: remove errexit flag from shebangDave Reisner
We're ill equipped to be using this flag as we don't trap and respond to the ERR signal. The result is that if is ever tripped, pacman-key will instantly exit with no indication of why. At the same time, we're already fairly good about doing our own error checking and verbalizing it before dying. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30pacman-key: return 0 from get_from if default value usedAllan McRae
This prevents the error trap being set off when GPGDir is commented in pacman.conf. Bug introduced in 507b01b9. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-30Remove redundant transaction size outputAllan McRae
Printing all of "Installed", "Removed" and "Net Upgrade" sizes is redundant as the difference of the first two is the last. Instead, only print "Installed Size" and "Net Upgrade Size" when both the installed and removed are non-zero. This results in the following output in the following cases: - package installation only: Installed Size - package removal only: Removed Size - package installation involving replacement: Installed + Net Upgrade Size - package upgrade: Installed + Net Upgrade Size - combination upgrade and installation: Installed + Net Upgrade Size Download Size remains outputted whenever something is downloaded. Signed-off-by: Allan McRae <allan@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-29paccache: allow strictly integer for -k optionlolilolicon
Verify the argument to -k is a non-negative integer. Leading zeros are simply stripped. 'declare -i keep' allowed the argument to -k to be any arithmetic evaluation expression. The simple assignment 'keep=$OPTARG' triggers arithmetic evaluation implicitly, which can either consume a huge amount of resources with input such as '2**2**32' or immediately produce an error on invalid input. Instead, we simply 'declare -- keep' and avoid all that. Signed-off-by: lolilolicon <lolilolicon@gmail.com> Signed-off-by: Dave Reisner <dreisner@archlinux.org>
2011-09-29Remove redundant "removal" output in pure remove operationAllan McRae
Printing "[removal]" beside all package names is redundant when all packages are being removed (i.e. when using -R). Signed-off-by: Allan McRae <allan@archlinux.org>
2011-09-29move prevprogress onto payload handleDave Reisner
This is a poor place for it, and it will likely move again in the future, but it's better to have it here than as a static variable. Initialization of this variable is now no longer necessary as its zeroed on creation of the payload struct. Signed-off-by: Dave Reisner <dreisner@archlinux.org> Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28pkgdelta: proper quoting in [[ expression ]]lolilolicon
Always quote the right-hand side of expression when the == or != operator is used, unless intended as a pattern. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-28makepkg: proper quoting in [[ expression ]]lolilolicon
Always quote the righthand side of expression when the == or != operator is used, unless intended as a pattern. Quoting bash(1): When the == and != operators are used, the string to the right of the operator is considered a pattern. Any part of the pattern may be quoted to force it to be matched as a string. Signed-off-by: lolilolicon <lolilolicon@gmail.com>
2011-09-28Refactor display_targets to not be recursiveDan McGee
This also fixes a memory leak and makes the dual-purpose "rows" variable go away in favor of storing the rows and non-verbose names separately. This also fixes some potential memory leaks and/or wrong behavior due to the config->verbosepkglists flag being flipped, which we should never be doing. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Refactor download payload reset and freeDan McGee
This was done to squash a memory leak in the sync database download code. When we downloaded a database and then reused the payload struct, we could find ourselves calling get_fullpath() for the signatures and overwriting non-freed values we had left over from the database download. Refactor the payload_free function into a payload_reset function that we can call that does NOT free the payload itself, so we can reuse payload structs. This also allows us to move the payload to the stack in some call paths, relieving us of the need to alloc space. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Initialize cURL library on first useDan McGee
Rather than always initializing it on any handle creation. There are several frontend operations (search, info, etc.) that never need the download code, so spending time initializing this every single time is a bit silly. This makes it a bit more like the GPGME code init path. Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28Add more valgrind suppressionsDan McGee
Signed-off-by: Dan McGee <dan@archlinux.org>
2011-09-28verbose package lists: remove errant debuggerDan McGee
Left this in as part of the last set of commits, whoops. Signed-off-by: Dan McGee <dan@archlinux.org>

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.