| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Fix a misspelling and make a clarification while we are at it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Noticed in FS#10025.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
After the libarchive upgrade from 2.4.12 to 2.4.14, our usage of
archive_entry_pathname became dangerous. We were using the result of that
function even after calls to archive_entry_set_pathname.
With 2.4.14, the entryname becomes wrong after these calls, and so all the
future use of entryname are bogus. entryname is used quite a lot for
logging, so that's not so bad. But it's also used for the backup handling,
so that's not very cool. For example, reinstalling a package with backup
entries will erase all the md5 entries from the DB, because they won't be
found back.
entryname is now a static string so that we can easily keep the result of
archive_entry_pathname.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: fixed version numbers in commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This should be a notable speed-up (apart from kernel cache).
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
With the addition of the archive_fgets() function, we can now skip the temp
file usage in pkg_load/parse_descfile that was not needed. This has a nice
benefit of probably being both faster, reducing code, and getting rid of
"expensive" file operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This crude function allows reading from an archive on a line-by-line basis
similar to the familiar fgets() call on a FILE stream. This is the first
step in being able to read DB entries straight from an archive.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I really don't think we need statically allocated strings here.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This patch should avoid duplicated target names in the backend.
1. sync_loadtarget will return with PM_ERR_TRANS_DUP_TARGET when trying to
add a duplicated target
2. sysupgrade never pulls duplicated targets
3. resolvedeps won't pull duplicated targets anymore
A pulled list was introduced in sync_prepare to improve the
pmsyncpkg_t<->pmpkg_t list conversion by making it more direct.
Also replace sync1005 and sync1006 by the sync1008 pactest, which is
similar but more interesting (the provisions are dependencies instead of
explicit targets).
sync1005 didn't work as expected anyway. It was expecting that pacman
failed, and pacman indeed failed, but not for the good reason. It didn't
fail during the preparation step because of conflicting targets, but during
the commit step, because of a md5 error...
And sync1006 didn't pass and was not really worth fixing. We have already
enough failing pactests more important than these two.
sync1008 pass with this patch.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
In the file:// download case, we didn't free the return from get_destfile()
after we were done with it. Fix it. (Found with xfercommand001.py)
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
The _alpm_backup_split function always alloced memory for the fname, and we
let it disappear in a specific case (upgrade026.py). Fix the issue.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We dup-ed the string but then duped it again. Fix it.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This gets rid of a lot of the unnecessary verbosity in the --valgrind output
when running all the tests. It should also make diff-ing output between test
runs a lot easier.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will reduce the need for running an -Syy if the DB was only
half-extracted, as the mtime won't get updated until the new database is
completely in place.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As it was already mentioned several times, the new -Sc behavior in 3.1 is
great, but only when the package cache is not shared.
This option has two possible values : KeepInstalled and KeepCurrent
With KeepCurrent, -Sc will clean packages that are no longer available in
any sync db, rather than packages that are no longer in the local db. The
resulting behavior should be better for shared cache.
Ref :
http://www.archlinux.org/pipermail/pacman-dev/2008-February/011140.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
From the man page :
"This is pretty useless and we're not sure why it even exists."
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
|
|
in PKGBUILD.proto, we have the following line
md5sums=() #generate with 'makepkg -g'
if we add a md5sum inside quotes, or even just the quotes :
md5sums=('') #generate with 'makepkg -g'
the highlighting will be totally messed up.
Adding the keepend keyword fixes this.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
A little fine tuning, delete some unnecessary space before or after
English word.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This was totally useless.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
These case insensitive comparisons didn't work in some locales, like tr_TR
where upper(i) != I. So a second case sensitive comparison had to be made
for each directive.
Only keeping case sensitive comparisons make the code cleaner and treat all
locales equally.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011445.html
Also fix pactests to use the correct case.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
All other steps in tidy_install function were already controlled by an
option in makepkg.conf, so this patch adds an option for the man page
compression step too.
This will allow to keep man pages uncompressed, which is required for some
special meta man page, like the zshall one (see FS#4580).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011472.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
* -Rss removes all dependencies (including explicitly installed ones).
* updated documentation
* two pactest files added to test the difference between -Rs and -Rss
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we had :
arch=(fake)
The fake string would be highlighted because it's invalid.
But if we had :
arch=('fake')
it didn't work.
Fix this for both arch and license arrays.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Its implementation was quite broken:
* add_loadtarget() might have silently filtered out some targets when
replacing an older version.
* This was used in sync.c to determine whether a target is implicit or not,
which is incorrect behavior. Before this patch we silently removed user
confirmed replacements; now we always warn on a replacement.
* remove001.py behavior was quite odd in adding same target 5 times to the
target list, we can change this behavior to be a failure.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Xav: changed remove001 pactest accordingly]
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: rewrote commit message]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Download to *.part and remove the suffix if successful, thus md5sums will be
checked only for complete files, and next time makepkg will resume
downloading of partial file instead of complaining about invalid md5sums.
Old DLAGENTS format is still supported.
Late fix: Do not try to download %u first
The output of grep was not suppressed, thus the output of get_downloadcmd
was wrong because of extra line at the beginning that contained an
unsubstituted (with %o and %u) entry from DLAGENTS.
Signed-off-by: Roman Kyrylych <roman@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Conflicts:
configure.ac
|
|
This should be the main step in the download refactoring initiated by commit
81a2a06818d367f8528c74311171417beb9e1592.
The stub functions introduced by that commit were implemented.
The big download code was mostly composed of two steps, and so it has been
naturally splitted in two functions : download_external and download_internal
file:/// urls are now handled manually, instead of forcing the use of the
internal downloader.
Thanks to Dan for fixing the remaining issues and cleaning up the patch :)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
From signal man page :
"The behavior of signal() varies across Unix versions, and has also varied
historically across different versions of Linux. Avoid its use: use
sigaction(2) instead. See Portability below."
The code was taken from there :
http://www.gnu.org/software/libtool/manual/libc/Sigaction-Function-Example.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This function was used in two different ways :
- as a signal handler : the argument was the signal number
- called manually for freeing the resources : the argument was the return
value
So the first part is now handler(int), and the second cleanup(int).
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011388.html
Remaining problems :
- the return values are messy. for example, 2 can mean both that it was
interrupted (SIGINT == 2), or that --help or -V was used (returned by
parseargs).
- apparently signal is not portable and sigaction should be used instead
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
We do the opposite.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
|
|
There is no need to put the list of files in there, which will get outdated
sooner or later. It's possible to generate the filelist in the plugin itself
using \r.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
[Dan: add scripts/ directory]
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This hasn't been updated in forever, and a simple python program could
regenerate it anyway. Or even grep.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Change the pacman_upgrade stub function to do what pacman_add used to do so
we can eliminate pacman_add. Move the code to the more-descriptive name of
upgrade.c.
Note that we have made no changes to the backend libalpm, where an ADD type
transaction could still be supported.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
There is still a lot of code that could be cleaned up internally.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is in anticipation of removing the -A/--add option from the pacman
frontend. I've went through each of the pacman pactests that used the -A
operation and decided whether they were worth keeping, whether there was
already an upgrade test doing the same thing, or whether it should be moved
over.
The GIT rename log should make several of the moves obvious, but for those
that were deleted:
add001: handled by upgrade004
add002: worthless
add004: worthless
add010: handled by upgrade011
add050: handled by upgrade010
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Now pacman frontend uses this function instead of the compile-time libalpm
version number.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
[Dan: fix one more spot where LIB_VERSION was used]
Signed-off-by: Dan McGee <dan@archlinux.org>
(cherry picked from commit 49197b7492d61bf1fc6bef59a708f4f586f32edb)
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Vojtěch has a new email address
* New pt_BR translator needed :
http://www.archlinux.org/pipermail/pacman-dev/2008-March/011313.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
This comment was created for the old provision version format and needless.
Signed-off-by: Nagy Gabor <ngaba@bibl.u-szeged.hu>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Hopefully the last of the huge commits ever. This also adds the c-format tag
to all of the translated messages.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add the --no-location xgettext option to disable the line numbers. They are
not very useful, and generate a huge number of pointless line changes on
every update.
Ref: http://www.archlinux.org/pipermail/pacman-dev/2008-March/011332.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|