| Age | Commit message (Collapse) | Author |
|---|
|
Previously, package names must match a specified scheme or they will cause
pacman add operations to fail. This is not a very intelligent or necessary
way to act, so remove the dependency on the name of the package to be
installed and read all relevant information from the metadata instead.
This does have one causality to be addressed later- pacman cache cleaning
functionality, which has never been phenomenal, just lost most capability.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I suppose -Qii could be used for other things than displaying
the list of backup files, but currently, it's the only one,
so that's how I documented it..
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add some alpm functions for getting optdepends, have makepkg include them
in the PKGINFO file, and have a pacman -Qi operation display the raw string
as stored by libalpm.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If we don't have asciidoc installed or enabled, we should still have a
successful make. However, we want to ensure 'make dist' fails without
asciidoc. This commit should ensure this.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As seen with the recent upgrade of pacman and the removal of the
pacman.d/current mirrorlist, files that were formerly in the backup array
get deleted upon their removal, which could be dangerous. Instead, we should
use the combined backup array of the old and new package. This fix should
address this issue in a relatively straightforward way.
In addition, old files should be moved to pacsave locations as expected.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
That is the problem mentioned by Nagy there (with suggestions for fixing it) :
http://www.archlinux.org/pipermail/pacman-dev/2007-August/009082.html
If a dependency conflicts with a local package and has to replace it,
the PM_SYNC_TYPE_DEPEND information is lost, and the resulting install
reason is wrong (the package is marked as explictly installed).
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
remove048 is the case mentioned there (fails in 3.0 but works in 3.1) :
http://www.archlinux.org/pipermail/pacman-dev/2007-September/009294.html
It's the same as remove046 with -R instead of -Rc.
sync060 is a case reported this morning on IRC :
a pacman -Su wanted to replace gensplashutils by gensplash,
but pacman said gensplashutils was required by initscripts-gensplash,
while initscripts-gensplash was not even installed.
This is also fixed in the current 3.1 code though.
upgrade02{4,5} are the backup handling problem I described there :
http://www.archlinux.org/pipermail/pacman-dev/2007-September/009376.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Move the progressbar code out of unlink_file so we can pass half the args.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
installdate should never be present in a package descfile, so get rid of it.
With the last commit, we also don't need the util strtoupper function.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
parse_descfile.
This fix FS#8081. The tr_TR locale has known issue with case insensitive
comparisons, mostly because upper(i) != I.
So the .PKGINFO files generated by makepkg MUST contain all keywords in lowercases now.
This was already done, but was not mandatory.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
The mistake fixed in commit 26441cf65ca10d4bf218203df5db5e8a7270787b
was actually done at two places.
This fix the second one.
Also remove one unnecessary newline introduced by
commit d34b2c4ed84bc40f4a895846785481fad88116a2
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
When calling a function of the alpm_option_get_* group, you get a segfault
if you don't call alpm_initialize() first. With this patch those functions
set pm_errno to PM_ERR_HANDLE_NULL and return an error value if handle ==
NULL.
(Dan: modified to meet pacman coding standards)
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Feature Request #8043 and provided patch. Thanks!
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Thanks to Jeff Bailes <thepizzaking@gmail.com> for pointing this out.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
To keep working correctly with url like :
ftp://ftp.archlinux.org/$repo/os/i686
rankmirrors will now replace $repo by core.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We're getting close to release, so might as well do this now so people can
actually update some of our documentation.
|
|
My two previous hacks related to this part
(8038190c7c4786e1c49494eea1b40cdddcbd5136 and
b15a5194d1a8485a2769560e49e6ff03e1862533) were caused by the lack of
understanding of a feature introduced a while ago:
Better control over CTRL-C interruptions -- do not leave the DB in an
inconsistent state (54008798efcc9646f622f6b052ecd83281d57cda).
Now I have been looking at this commit, and the added feature is indeed
interesting. The main problem I had with it is that it does a rather
unusual use of alpm_trans_release, which caused a few problems that I tried
to fix in a weird way. I think these problems were caused by the fact that
there weren't any difference between "interrupt transaction" and "release a
transaction which failed" actions from the alpm_trans_release POV. So I
decided to add a new function instead, alpm_trans_interrupt, which is
called on Ctrl+C, and which only sets trans->state to STATE_INTERRUPTED so
that remove_commit and add_commit can exit cleanly at a safe moment. This
allowed me to revert my two previous hacks as well.
Also ensure we handle SIGINT correctly in all cases- if a transaction is
not ongoing, then we can free the transaction and exit quickly.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This reverts commit dfc85cb5f516ffbcff557522e9703c5c7d88b047
and b6f3fe6957d0206485eac98fb2120578b75d0058.
This DB check is already in testdb (among others).
Also testdb now uses the db path set at make time by default,
so specifying the db path is optional.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I'm currently working on python bindings for alpm written in pyrex. While
working i found that declaring alpm_strerror as
char * alpm_strerror (void)
instead of
char * alpm_strerror (int err)
and then using pm_errno in the implementation instead of err, could make it
more bindings-friendly.
Dan: cleaned up and added void to declaration. Instead of replacing existing
function, add a new function called 'alpm_strerrorlast(void)'.
Signed-off-by: Stefano Esposito <stefano.esposito87@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
remove047 : Remove a package required by other packages
conflict004 : a package conflicts with itself
http://www.archlinux.org/pipermail/pacman-dev/2007-August/009077.html
sync400 : Install package with dep that conflicts with older version of package
sync401 : Ensure we choose provider already in target list
http://www.archlinux.org/pipermail/pacman-dev/2007-July/009041.html
sync402/sync403 (failing) : Choice between two providers
http://www.archlinux.org/pipermail/pacman-dev/2007-July/008787.html
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
repo-add, repo-remove:
'bsdtar -c * | ...' doesn't work (you need '-f -'). Code clean up
eliminated this bug.
Removed the multiple checksum support, pacman now only supports MD5, so
there's no need for the database to contain multiple checksums.
Quote all variables containing file/dir names to prevent paths
containing spaces from causing problems.
Add msg, warning and error functions.
General code clean up.
pacman-optimize:
Use a sub-directory in /tmp for working files to make it easier to clean
up at the end.
Add quotes round $@ in die and die_r, otherwise printf can't display the
message correctly.
makepkg:
Disable colour output if stderr is not a tty.
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
I wonder how many tools / scripts deal directly with the sync databases under /var/lib/pacman/ ,
I doubt these are the only ones.
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Fixes 'make dist' target as sha1.c and md5driver.c no longer exist.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
One string in de.po differed pretty strongly with its translated version.
It may still be totally wrong as far as translations go, but it compiles
now. Get translater to check.
Also, ensure the proper dbpath gets set in the db when it's created.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Suppose a package foo depends on foo1, foo2, ..., foon.
Doing pacman -Rc foo1 foo2 ... foon added foo n times to the removal list,
because what checkdeps return is something like :
foo1 is requiredby foo
foo2 is requiredby foo
...
foon is requiredby foo
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Introduce two new methods into the API - alpm_db_register_sync and
alpm_db_register_local, which replace the functionality of
alpm_db_register. db_register_local always returns the local DB, and
db_register_sync will always try to register a sync DB. This conceptually
separates the local DB from sync DBs in the code. Also updated the pacman
frontend to use the new functions. In addition, this changes the location
of all sync DBs in the filesystem from $DBPATH/$REPO to $DBPATH/sync/$REPO,
This removes the silly limitation that a sync DB couldn't be named 'local',
along with structurally separating sync DBs and the local DB in the
filesystem.
Signed-off-by: Travis Willard <travis@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
During last refactoring, a "continue" somehow became a "return(0)" :)
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Chantry Xavier <shiningxc@gmail.com>
|
|
Signed-off-by: Andrew Fyfe <andrew@neptune-one.net>
|
|
This allows us to remove the hack in the frontend where we added a newline
to everything coming out of the pm_printf functions, and instead let the
developer put newlines where they want them. This should be the last hangover
of that auto-newline stuff.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
As reported by JGC in FS #7652, the check for EACCES is not exactly correct.
We need to check for the ETXTBSY error as well. This is necessary on FreeBSD.
Signed-off-by: Dan McGee <dan@archlinux.org>
|