| Age | Commit message (Collapse) | Author |
|---|
|
If someone specifies a bogus line such as
pacman -S baz adsf/boo base-devel
we are better off trying to process all targets and showing all relevant
errors before exiting. This is easier in -U and -R operations where we
aren't dealing with groups, but here we attempt to skip group selection
once we know a target has errored to avoid cluttering the output and
hiding the real problem.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
If an early target fails, we stopped processing the rest of the list. We
should continue all the way through and show relevant errors for each
target if possible, and error out only at the end.
We do process all targets to check for URLs first and will error out if
some could not be processed; we then do a second loop and try to load
each target specified on the command line.
This mirrors a patch by Allan to do the same for removal operations.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
On a removal operation, pacman currently reports an error for the
package that is not found in the database and then exists. Adjust
so that all unknown packages are reported.
Before:
> pacman -R foo bar
error: 'foo': target not found
After:
> pacman -R foo bar
error: 'foo': target not found
error: 'bar': target not found
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This converts our script generation to use the built-in AM_V_GEN macro,
which honors the V= setting passed to make and allows one to see the
full command if they truly desire. The AM_V_at macro is also used in
place of an explicit @ so verbose-mode compiles show all commands being
run.
We can also use these two macros in doc generation to quiet it down to
the level we expect.
Other minor changes:
* a pointless test call is removed in test/pacman/tests/
* sed is used instead of dos2unix as we depend on it anyway
* consecutive chmod calls are reduced to a single call (e.g., '+x,a-x')
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This will require you to pass 'V=1' if you want the previous, more
verbose output.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This allows for the struct layout to have no empty spaces.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Since we know the length of the line, we can use this all the way
through and do a cheaper operation than strdup() by just invoking malloc
and memcpy directly.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Be more semantically accurate and avoid accidental overwriting of some
configuration variables that are considered to be constant.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Add a read-only variable "$myname" to every contrib script and hardcode
program names instead of relying on "$0". The variable name "$myname"
was chosen because it is already used in pacman and because we use
"$myver" to specify the program version in the official scripts.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is awesome, and I don't know why we haven't already done this. It
gives us the much more less verbose make output in a few different ways:
* If you run `make V=0`, you will get the quiet output.
* If you run `./configure --enable-silent-rules`, the quiet output is
the default; verbose output can be had by passing V=1 to make.
make[3]: Entering directory `/home/dmcgee/projects/pacman/lib/libalpm'
CC add.lo
CC be_local.lo
CC be_package.lo
CC be_sync.lo
CC delta.lo
.....
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We were using the size of a pointer, not the size of the whole
archive_read_buffer struct. Thanks to Clang/LLVM 3.0 and Allan/Dave in
IRC for finding this one.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This prevents user error in adding a file generated via `gpg --sign`
rather than `--detach-sign`, for example. The same 16KiB limit is used
we use in our pacman download code.
The section is moved above the checksum generation to avoid presenting
info messages to the user if the signature isn't valid.
Addresses a shortcoming pointed out in FS#27453.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We had a 16 KiB limit on database signatures, we should do the same here
too to have a slight sanity check, even if we can't do so for the
package itself yet.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Be consistent with all other contrib scripts and support the "--help"
command line switch. Fixes FS#27258.
Signed-off-by: Lukas Fleischer <archlinux@cryptocrack.de>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Whereas comm will check inputs to see if they're sorted (and warn when
they aren't), grep doesn't even care about ordering. In this particular
instance -- neither do we. We're only interested that the two lists are
equivalent.
Fixes FS#26580.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Both currently marked as failing.
* sync303.py encapsulates the broken behavior reported in FS#27214.
* sync304.py shows how packages depending on a specific version of a
package in SyncFirst can cause breakage of the dependency resolver.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Some late-arriving translation updates and add the correct dates to the
index.txt releases table.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
We do this in several of the package duplication steps; add a helper
function for doing so to reduce some of the repetitive code.
Also add a free_deplist function for our repeated depend list free calls
of both the data and the list.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Made existing documentation more consistent and added
documentation where there was none. One function still
needs documentation and is marked with 'TODO'.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Dan: const pointers, don't worry about bitfields.
Signed-off-by: Florian Pritz <bluewind@xinu.at>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Add support for overriding configuration in /etc/makepkg.conf and
~/.makepkg.conf by setting the environment variable PACKAGER similar to
how SRCDEST and PKGDEST behave.
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
Signed-off-by: Allan McRae <allan@archlinux.org>
|
|
This addresses a short but sweet race condition currently existing in
repo-add and repo-remove. We do the smart thing and zip the database to
a location in a temporary directory and not over the original database
directly. However, we then proceed to move this file directly from the
temporary directory to our final location, which is more than likely a
cross-filesystem move (/tmp on tmpfs) and thus non-atomic.
Instead, zip the file to the same directory, prefixing the filename with
'.tmp.'. We then move the file into place. This move is guaranteed to be
atomic, so any reader of the database file will get either the old
version, the new version, or ENOENT.
We also perform a hardlink if possible instead of a move when shifting
the old database out of the way to '.old'; this ensures there is no
chance of a database file not existing during the whole process.
Only one small race condition should now be present- when the database
has been fully moved into place and the signature has not, you may see a
mismatch. There seems to be no good way to address this, and it existed
before this patch.
A final note- if someone had locked-down permissions on the directory
that the database files are in (e.g., could only write to foo.db.tar.gz,
foo.db, foo.db.tar.gz.old, foo.db.old, and the lock file), this would
break.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Given our semi-frequent use of pushd/popd, if we are in any directory
but the original and the database path given was relative, we won't
unlock the database file when cleaning up after an error.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
* Add last-minute changes to NEWS
* Don't treat '_' or '_n' special in scripts when finding translatable
strings; this breaks with one use of `read` and a dummy _ variable
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This applies to pkgver, pkgrel, and epoch and ensures that any trailing
whitespace outside of the context of the variable declaration itself is
properly trimmed. The Bash parser will ignore this, and so should we.
We don't need to worry about leading space because it would force a
syntax error, or fail validation.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
This moves the common setup code of about 5 different callers into one
method. Error messages will now be common and shared in all places;
several paths did not have any messages at all before.
In addition, we now pick an ideal block size for the archive read based
off the larger value of our default buffer size or the st.st_blksize
field. For a filesystem such as NFS, this is often much larger than the
default 8192- values such as 32768 and 131072 are common.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Fixes FS#26806.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
When doing a bare -U operation on a local package that doesn't pull in
any dependencies from the sync databases, we can get away with missing
database files. This makes the check conditional on no sync targets
found in the target list. This is not the prettiest code here so we have
a bit of hackish behavior required to straighten both the behavior and
the nonsensical error message out.
Addresses FS#26899.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Commit e7b56f48 allowed makepkg to handle pgp signatures with the
.sign extension. Update the man page to reflect this.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
This is consistent with the other enums and structs, and should be
slightly more readable.
Signed-off-by: Jonathan Conder <jonno.conder@gmail.com>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
Bump the version, update the translation template files, and fill in
NEWS with relevant commits and changes since 4.0.0.
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Adds test remove031.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is work originally provided by Sascha Kruse on FS#20360 with only
minor adjustments to the implementation. It's been expanded to cover:
NoUpgrade, NoExtract, IgnorePkg, IgnoreGroup.
Adds tests ignore008, sync139, sync502, and sync503.
Also satisfies FS#18988.
Original-work-by: Sascha Kruse <knopwob@googlemail.com>
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This is a simple change that allows comparions to be more in line with
how other checks are done. It will be necessary for ensuing patchwork
that implements fnmatch for comparing and assumes a specific argument
ordering.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
|
|
This prevent bsdtar from exploding when install= or changelog= are
present without a value.
Signed-off-by: Dave Reisner <dreisner@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|
|
|
|
Detached sgnature files with extension .sign are accepted by gnupg.
Signed-off-by: Allan McRae <allan@archlinux.org>
Signed-off-by: Dan McGee <dan@archlinux.org>
|