Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/configs/releng
AgeCommit message (Collapse)Author
2020-06-23Removing wget in favor of curlDavid Runge
configs/releng/airootfs/root/.automated_script.sh: Replacing wget with curl for the use-case of downloading a pre-specified remote startup script (changing flags where needed). configs/releng/packages.x86_64: Removing wget from the list of installed packages, as .automated_script.sh was the only reason for it being installed. Closes #16
2020-06-23Numerical prefix for systemd-networkd configurationDavid Runge
Adding a numerical prefix ('20-') to the ethernet.network and wireless.network configuration files for systemd-networkd. This way overriding them can become more predictable e.g. by providing files with a '30-' prefix. Closes #13
2020-06-23Removing custom UEFI shell boot loader configsDavid Runge
configs/releng/build.sh: Copying the edk2-shell based Shell_Full.efi to the root of the iso/ efi image as 'shellx64.efi' is automatically picked up by certain hardware and by systemd-boot. This makes all custom UEFI shell configuration obsolete. configs/releng/efiboot/loader/entries/uefi-shell-*.conf: Removing obsolete custom UEFI shell boot loader configuration. Closes #14
2020-06-23Removing efitoolsDavid Runge
configs/releng/build.sh: Removing the efitools based PreLoader.efi and HashTool.efi, as they are dead weight due to not allowing secure boot (FS#59487). Future secure boot functionality (most probably based on shim) is being discussed in FS#53864. Closes #17
2020-05-31Replacing dhcpcd with systemd-networkd and systemd-resolvedDavid Runge
configs/releng/airootfs/etc/udev/rules.d/81-dhcpcd.rules: Removing the udev rule for starting dhcpcd@.service on interfaces of the form eth* and en*. configs/releng/airootfs/etc/systemd/network/{ethernet,wireless}.network: Adding default DHCP configurations for en*, eth*, wlp* and wlan* interfaces. configs/releng/airootfs/etc/resolv.conf: Adding a symlink from /run/systemd/resolve/stub-resolv.conf to /etc/resolv.conf (in airootfs). configs/releng/airootfs/root/customize_airootfs.sh: Adding systemd-networkd and systemd-resolved to the list of services that are being enabled during airootfs customization.
2020-05-31Unsetting the root passwordDavid Runge
Due to changes in the filesystem package [1] the current /etc/passwd does not allow login without an empty root password anymore. This becomes apparent, when switching to another TTY than the one autologin is activated for. By running passwd -d root we unset the password. In the future this should go to a custom /etc/passwd file. [1] https://git.archlinux.org/svntogit/packages.git/commit/trunk?h=packages/filesystem&id=0320c909f3867d47576083e853543bab1705185b
2020-05-30Fixing default bootloader menu selection.David Runge
configs/releng/efiboot/loader/loader.conf: The 'default' bootloader selection of systemd-boot is based on a glob pattern. The previous pattern was not sufficient to select anything, which is why it is now made explicit (pointing to archiso-x86_64.conf).
2020-05-30Simplifying regex for script downloadDavid Runge
configs/releng/airootfs/root/.automated_script.sh: Using only one regex to match http://, https:// or ftp:// endpoints.
2020-05-30Using edk2-shell for UEFI shellDavid Runge
configs/releng/build.sh: Instead of downloading UDK2018 based edk2 UEFI shell, use the Shell binaries from the edk2-shell package. This effectively makes the use of EFI shell v1 obsolete. configs/releng/efiboot/loader/entries/uefi-shell-v*: Renaming UEFI shell entries to match the packaged edk2-shell based UEFI shell binaries. configs/releng/build.sh: Renaming the systemd-boot bootloader entries for UEFI shell (normal and full version) to reflect their file names, which are derived from the binary names in the edk2-shell package. Copying the edk2-shell based UEFI shell binaries for normal efiboot and .iso based "el-torito" efiboot mode. docs/README.build: Adding edk2-shell to the requirements in the documentation, as the package is now used to provide UEFI shell.
2020-05-30Renaming refind-efi to refindDavid Runge
configs/releng/packages.x86_64: As the refind-efi package has been renamed to refind, the package required for the releng image needs to be renamed as well.
2020-05-30Revert "Renaming refind package"David Runge
This reverts commit c16612401e2db36ae5437df2c77999d45f47d39f.
2020-04-23Renaming refind packageDavid Runge
configs/releng/packages.x86_64: refind-efi has been renamed to refind
2019-10-16FS#64049: Re-add missing packages reflecting the base group to package ↵Pierre Schmitz
transition
2019-05-01[configs/releng] Re-add wpa_supplicantGerardo Exequiel Pozzi
2019-04-26update download url for Shell.efiChristian Hesse
Signed-off-by: Christian Hesse <mail@eworm.de>
2019-04-06[configs/releng] Add iwdGerardo Exequiel Pozzi
Requested at FS#62087
2019-04-06Update packages.x86_64martindamianfernandez
wpa_actiond 404 file no found
2018-12-13update download url for Shell_Full.efiChristian Hesse
https://bugzilla.tianocore.org/show_bug.cgi?id=1108 Signed-off-by: Christian Hesse <mail@eworm.de>
2018-08-25[configs/releng] Update amd-ucode license pathv39Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2018-08-24use package amd-ucode for amd microcodeChristian Hesse
The package linux-firmware has a new split package amd-ucode. Do not build the image manually but use the package. Signed-off-by: Christian Hesse <mail@eworm.de>
2018-08-18[configs/releng] Make and use amd_ucode.bin for initrd.Gerardo Exequiel Pozzi
Requested at FS#59694
2018-08-01make detection of kernel modules dir more robustEli Schwartz via arch-releng
extract `uname -r` from the contents of vmlinuz-linux rather than make assumptions about the kernel EXTRAVERSION. This is trivially customizable by changing the chosen kernel image. Fixes FS#59496 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
2018-07-26[configs/releng] add wireless-regdb to airootfsGerardo Exequiel Pozzi
Requested at FS#59434
2018-06-28[releng] Copy custom pacman.conf to airootfsGerardo Exequiel Pozzi
2018-06-28[releng] upgrade custom pacman.confGerardo Exequiel Pozzi
2018-06-23[releng] support for -P iso_publisher and -A iso_application in build.shGerardo Exequiel Pozzi
Implement FS#54126
2018-06-23[releng] bye pcmcia initcpioGerardo Exequiel Pozzi
2018-06-23[releng] bye zd1211-firmwareGerardo Exequiel Pozzi
2018-06-23[releng] Cleanup remain dual-arch stuffGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2018-06-23Ensure correct umask for scriptsGerardo Exequiel Pozzi
Fix for FS#58473 Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2018-06-08Remove speedtouch from packages.bothLi-Yu Yu via arch-releng
Since 2018-06-05: speedtouch 1.3.1-6 has been removed from the [extra] repository. https://www.archlinux.org/packages/extra/x86_64/speedtouch/ Signed-off-by: Li-Yu Yu <afg984@gmail.com>
2018-04-16Install broadcom-wl to the release ISOEli Schwartz via arch-releng
Fixes FS#58239 Signed-off-by: Eli Schwartz <eschwartz@archlinux.org>
2017-11-02configs/*: convert to new array-based mkinitcpio varsGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2017-11-01rfkill is part of util-linux nowPierre Schmitz
2017-03-01[configs/releng] Oops, rename -dual.iso -> -x86_64.isoGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2017-02-12[configs/releng] Remove i686 syslinux filesGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2017-01-23[configs/releng] Do not build i686Gerardo Exequiel Pozzi
Only avoid build i686. The syslinux config files for i686 are still present. This implies that a i686 entry will be present but not working. In another patch, this can be removed if desired. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-12-07[configs/releng] Increse efiboot.img againGerardo Exequiel Pozzi
We reached the upper limit again [#1], increasing sufficiently to do not touch again in long time. [#1] 526be1579e515beb7bfb04b154b23450eb6589cb Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-10-23[configs/releng] Add exfat-utils to live-environmentGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-05-31[configs/releng] Add ndisc6Gerardo Exequiel Pozzi
Requested at FS#49526 Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-05-15[configs/releng] Fix efitools path #2v26Gerardo Exequiel Pozzi
Thanks Daniel Hillenbrand.
2016-05-14[configs/releng] Oops, fix efitools pathGerardo Exequiel Pozzi
Thanks Philip Müller. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-05-12[configs/releng] prebootloader -> efitoolsGerardo Exequiel Pozzi
Should be fixed FS#49314 first
2016-05-12update to match upstream binary name mkfs.fatChristian Hesse
Starting with dosfstools 4.0-1 the mkfs executable is called 'mkfs.fat'. Signed-off-by: Christian Hesse <mail@eworm.de>
2016-03-15[configs/releng] Add some SCSI toolsGerardo Exequiel Pozzi
Requested at FS#48591 Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-03-01[archiso] Increase EFI image size for El Torito boot methodGerardo Exequiel Pozzi
Current build leaves ~800K free of 31M in the FAT filesystem, adding 9M. Going beyond 65535 sectors of 512-byte is a bit special, but works for EFI. Image size is reported a zero in boot catalog, but xorriso does a good job, and writes right value in hybrid-partition. Tested booting in qemu in both modes (cd-rom and hybrid) and works fine. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2016-03-01Fix non-signed buildsGerardo Exequiel Pozzi
FS#48382
2016-02-28Optionally sign the squashfs files with gpg and add the gpg key to the initramfsThomas Bächler
A new option -g <keyid> is added to build.sh set the key id. If it is set, the squashfs files will be signed by gpg and the gpg key will be added to archiso.img. In order to use this option, a gpg agent must be running. Since build.sh is executed as root, it may be necessary to set the GNUPGHOME environment variable, for example $ su -c "GNUPGHOME=/home/youruser/.gnupg /path/to/build.sh -g yourkeyid"
2015-09-11[configs/releng] Fix (again) sshd root loginGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2015-08-11[configs/releng] Ignore Lid/Sus/Hib switch/keys by logindGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>